journal article·2000-08

Effect of barrier layer thickness and composition on fracture toughness of layered zirconia/alumina composites

H. Tomaszewski, H. Weglarz, M. Boniecki, W. M. Rećko

Journal of Materials Science· Volume 35· Issue 16
Publisher page

Abstract

Composites of yttria or ceria-partially-stabilized zirconia with layers of either alumina or a mixture of 50% by volume of alumina and zirconia were fabricated by sequential centrifuging of powder suspensions. This method allowed formation of layers with thickness of 10 to 70 μm. In both cases (Y-ZrO2 and Ce-ZrO2 matrices), a significant increase in fracture toughness, work of fracture and bending strength was observed only for composites with barrier layers made of a pure alumina. A crack deflection in alumina layer was found to be the main mechanism responsible for an increase in mechanical properties. For confirmation this thesis, no increase in the transformation zone width was observed. As it was shown, crack deflection angle was dependent on alumina layer thickness. Higher deflection angles for a thicker alumina layers were found. Explanation of this phenomenon was given by determination of residual stress distribution in barrier layers made by piezospectroscopy. A correlation between the crack deflection angle and the difference of stress between the layer boundary and the centre of the layer was noticed. The residual stresses observed are a result of thermal expansion mismatch between alumina and zirconia and thermal anisotropy of alumina. Shrinkage mismatch, especially in the case of Ce-ZrO2 and Al2O3, as a third source of stress is suggested.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Nuclear materials and radiation effects · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. R. C. Garvie, R. H. J. Hannink and R. T. Pascoe, Nature (London) 248 (1975) 703.10.1038/258703a0 ↗
2. A. G. Evans and R. M. Cannon,Acta Metall. 34(5) (1986) 651.10.1016/0001-6160(86)90052-0 ↗
3. A. G. Evans and A. H. Heuer, J. Amer. Ceram. Soc. 63 (1980) 241.10.1111/j.1151-2916.1980.tb10712.x ↗
4. A. H. Heuer, ibid. 70(10) (1987) 689.10.1111/j.1151-2916.1987.tb04865.x ↗
5. R. M. Mc Meeking and A. G. Evans, ibid. 65(5) (1982) 242.10.1111/j.1151-2916.1982.tb10426.x ↗
6. J. C. Lambropoulos, ibid. 69(3) (1986) 218.10.1111/j.1151-2916.1986.tb07411.x ↗
7. D. B. Marshall, F. F. Lange and J. J. Ratto, ibid. 74(12) (1991) 2979.10.1111/j.1151-2916.1991.tb04290.x ↗
8. D. B. Marshall, Ceram. Bull. 71(6) (1992) 969.
9. P. S. Nicholson, P. Sarkar and X. Haung, J. Mater. Sci. 28 (1993) 6274.10.1007/BF01352183 ↗
10. W. J. Clegg, K. Kendall, N. M. Aldorf, T. W. Button and J. D. Birchall, Nature (London) 347 (1990) 455.10.1038/347455a0 ↗
11. D. B. Marshall, P. E. D. Morgan and R. M. Housley, J. Am. Ceram. Soc. 80(7) (1997) 1677.10.1111/j.1151-2916.1997.tb03038.x ↗
12. M. Y. He and J. W. Hutchinson, Int. J. Solids Structures 25(9) (1989) 1053.10.1016/0020-7683(89)90021-8 ↗
13. M. Y. He and A. G. Evans, ibid. 31(24) (1994) 3443.10.1016/0020-7683(94)90025-6 ↗
14. S. Ho, C. Hillman, F. F. Lange and Z. Suo, J. Am. Ceram. Soc. 78(9) (1995) 1353.
15. M. Oechner, C. Hillman and F. F. Lange, ibid. 79(7) (1996) 1834.10.1111/j.1151-2916.1996.tb08003.x ↗
16. T. Fett and D. Munz, ibid. 75(4) (1992) 958.10.1111/j.1151-2916.1992.tb04166.x ↗
17. A. G. Evans, in “Fracture Mechanics of Ceramics, Vol. 1: Concept, Flaws and Fractography” edited by R. C. Bradt, D. P. H. Hasselmann, F. F. Lange (Plenum Press, 1974) p. 17.10.1007/978-1-4684-2991-6_2 ↗
18. T. Fett, Eng. Fract. Mech. 40 (1992) 683.10.1016/0013-7944(91)90161-S ↗
19. J. He and D. R. Clarke, J. Amer. Ceram. Soc. 78(5) (1995) 1347.10.1111/j.1151-2916.1995.tb08493.x ↗
20. N. L. Harrison and W. J. Harrison, J. Adhes., 3 (1972) 195.10.1080/00218467208072193 ↗
21. H. Kirchner, J. Convay and A. E. Segall, J. Am. Ceram. Soc. 70(2) (1987) 104.10.1111/j.1151-2916.1987.tb04938.x ↗