journal article·2002-07

Sensitivity of acoustic emission for the detection of stress corrosion cracking during static U-bend tests on a 316L stainless steel in hot concentrated magnesium chloride media

F. Ferrer, E. Schille, D. Verardo, J. Goudiakas

Journal of Materials Science· Volume 37· Issue 13
Publisher page

Abstract

A lot of laboratory studies have shown that acoustic emission (AE) is a well suited technique to monitor stress corrosion cracking (SCC) during different kind of tests like slow strain rate or constant load tests. In principle, SCC could occur wherever a specific corrodent and sufficient tensile stresses coexist. Even if the medium is low corrosive and the stresses are not very intense, the damage can conduct to rapid and catastrophic damages because there is a synergistic interaction between corrosion process and mechanical effect. In the objective to monitor on-line this phenomenon on real structures, it seems reasonable to characterize acoustic emission during static U-bend tests which are, in term of stress intensity, very representative of what happens on plant. The present study is concerned with static tests conducted on a 316L stainless steel in hot concentrated MgCl2 media. The high sensitivity of AE to detect active cracks during their early stages of propagation is evidenced.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Erosion and Abrasive Machining · Coal Combustion and Slurry Processing · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. H. MAZILLE and R. ROTHEA, in “Modeling Aqueous Corrosion,” edited by K. R. Trethewey and P. Roberge (Kluwer Academic Publishers, Boston, MA, 1994) p. 103.10.1007/978-94-011-1176-8_5 ↗
2. T. W. RETTIG and M. J. FELSEN, Corrosion 32(4) (1976) 121.10.5006/0010-9312-32.4.121 ↗
3. K. H. W. SEAH, K. B. LIM, C. H. CHEW and S. H. TEOH, Corrosion Science 34(10) (1993) 1707.10.1016/0010-938X(93)90042-F ↗
4. H. MAZILLE, R. ROTHEA and C. TRONEL, ibid. 37(9) (1995) 1365.10.1016/0010-938X(95)00036-J ↗
5. F. FERRER, H. IDRISSI, H. MAZILLE, P. FLEISCHMANN and P. LABEEUW, Wear 231 (1999) 108.10.1016/S0043-1648(99)00120-9 ↗
6. F. FERRER, E. ANDRES, J. GOUDIAKAS and C. BRUN, Journal of Acoustic Emission 18 (2000) 155.
7. S. YUYAMA, in “Corrosion Monitoring in Industrial Plants Using Nondestructive Testing and Electrochemical Methods,” ASTM STP 908, edited by G. C. Moran and P. Labine (American Society for Testing and Materials, Philadelphia, PA, 1986) p. 43.10.1520/STP17436S ↗
8. S. YUYAMA, T. KISHI and Y. HISAMATSU, Journal of Acoustic Emission 2 (1983) 71.
9. A. CAKIR, S. TUNCELL and A. AYDIN, Corrosion Science 41 (1999) 1175.10.1016/S0010-938X(98)00178-4 ↗
10. W. W. GERBERICH, R. H. JONES, M. A. FRIESEL and A. NOZUE, Materials Science and EngineeringA103 (1988) 185.10.1016/0025-5416(88)90565-4 ↗
11. P. F. BUCKLEY, K. BALDWIN, M. J. EHRLICH and J. W. WAGNER, in “Review of Progress in Quantitative Nondestructive Evaluation,” Vol. 17A (Plenum, 1998) p. 571.10.1007/978-1-4615-5339-7_74 ↗
12. S. YAMASAKI and T. TAKAHASHI, Tetsu-to-Hagane (Journal of the Iron and Steel Institute of Japan) 83(7) (1997) 460.
13. B. KNOWLTON, A. M. SIDDIQUI and S. JIHAN, British Corrosion Journal 32(4) (1997) 249.10.1179/bcj.1997.32.4.249 ↗
14. R. H. JONES and M. A. FRIESEL, Corrosion 48(9) (1992) 751.10.5006/1.3315996 ↗
15. K. Y. SUNG, I. S. KIM and Y. K. YOON, Scripta Materialia 37(8) (1997) 1255.10.1016/S1359-6462(97)00222-4 ↗
16. P. COMBRADE, in ”Corrosion Sous Contraintes— Ph´enom´enologie et M´ecanismes,” Les ´editions de physiques (Les Ulis, Bombanes, 1990) p. 539.
17. A. BOUZINA, Ph.D. thesis, N° d'ordre: 1998 – 06, 1998, p. 130.