journal article·2016-07

Phase transformation and mechanical behaviour of thermo-mechanically controlled processed high-strength multiphase steel

G. Mandal, S. K. Ghosh, S. Mukherjee

Journal of Materials Science· Volume 51· Issue 14
Publisher page

Abstract

A novel low-alloy high-strength steel [Fe–0.20C–1.65Mn–1.40Si–1.50Al–1.30Cu–1.05Ni–1.07Co (wt%)] has been thermo-mechanically processed with a finish rolling temperature of 850 °C, followed by air cooling and water quenching in order to obtain a good combination of strength and ductility. Phase transformations of the above steel at different cooling rates have been studied and continuous cooling transformation (CCT) diagram has been constructed using data, obtained from dilatometric study. The phase field of CCT diagram indicates microstructure changes from a mixture of ferrite and bainite to fully martensite accompanied with the enhancement of hardness with increasing cooling rate. The microstructural investigation at lower cooling rate (≤5 °C/s) suggests the possibility of achieving pearlite-free microstructure by direct air cooling from the austenite region. Directly air-cooled steel has demonstrated primarily ferrite–bainite microstructure, which shows attractive tensile strength (>1050 MPa) and ductility (>15 %). On the other hand, directly water-quenched steels reveal predominantly lath martensitic microstructure with high dislocation density which exhibits higher tensile strength (>1600 MPa) and lower ductility (~12 %). The multiple stages of strain hardening behaviour of the investigated steel under different cooling conditions have been examined with respect to microstructural evolution.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. Sakuma Y, Matsumura O, Takechi H (1991) Mechanical properties and retained austenite in intercritically heat-treated bainite-transformed steel and their variation with Si and Mn additions. Metall Trans 22(2):489–49810.1007/BF02656816 ↗
2. Sugimoto KI, Misu M, Kobayashi M, Shirasawa H (1993) Effects of second phase morphology on retained austenite morphology and tensile properties in a trip-aided dual-phase steel sheet. ISIJ Int 33(7):775–78210.2355/isijinternational.33.775 ↗
3. De Meyer M, Vanderschueren D, De Cooman BC (1999) The influence of the substitution of Si by Al on the properties of cold rolled C-Mn-Si TRIP steels. ISIJ Int 39(8):813–82210.2355/isijinternational.39.813 ↗
4. Sugimoto KI, Kobayashi M, Hashimoto SI (1992) Ductility and strain-induced transformation in a high-strength transformation- induced plasticity-aided dual-phase steel. Metall Trans A 23(11):3085–309110.1007/BF02646127 ↗
5. Nobuo S, Shinji M, Shigeru E (2008) Recent development in microstructural control technologies through the thermo-mechanical control process (TMCP) with JFE steel’s high-performance plates. JFE Tech Rep 11:1–6
6. Grajcar A, Skrzypczyk P, Kuziak R, Golombek K (2014) Effect of finishing hot-working temperature on microstructure of thermomechanically processed Mn-Al multiphase steels. Steel Res Int 85:1058–106910.1002/srin.201300227 ↗
7. Ranjan R, Beladi H, Singh SB, Hodgson PD (2015) Thermo-mechanical processing of TRIP-aided steels. Metall Mater Trans A 46A:3232–324710.1007/s11661-015-2885-5 ↗
8. Caballero FG, Capdevila C, San Martin D, Garcia de Andres C (2004) Reaustenitization of steels with different initial microstructures. Rev Metall Madr 40:214–21810.3989/revmetalm.2004.v40.i3.267 ↗
9. Andrés CGD, Caballero FG, Capdevila C, Álvarez LF (2002) Application of dilatometric analysis to the study of solid–solid phase transformations in steels. Mater Charact 48:101–11110.1016/S1044-5803(02)00259-0 ↗
10. Kop TA, Sietsma J, Zwaag SVD (2001) Dilatometric analysis of phase transformations in hypo-eutectoid steels. J Mater Sci 36:519–526. doi: 10.1023/A:100480540240410.1023/A:1004805402404 ↗
11. Caballero FG, Capdevila C, García De Andrés C (2001) Modelling of kinetics of austenite formation in steels with different initial microstructures. ISIJ Int 41(10):1093–110210.2355/isijinternational.41.1093 ↗
12. Gourgues A-F, Flower HM, Lindley TC (2000) Electron backscattering diffraction study of acicular ferrite, bainite, and martensite steel microstructures. Mater Sci Technol 16:26–4010.1179/026708300773002636 ↗
13. Im Y-R, Oh YJ, Lee B-J, Hong JH, Lee H-C (2001) Effects of carbide precipitation on the strength and charpy impact properties of low carbon Mn-Ni-Mo bainitic steels. J Nucl Mater 297:138–14810.1016/S0022-3115(01)00610-9 ↗
14. Aglan HA, Liu ZY, Hassan MF, Fateh M (2004) Mechanical and fracture behaviour of bainitic rail steel. J Mater Process Technol 151:268–27410.1016/j.jmatprotec.2004.04.073 ↗
15. Lee KM, Polycarpou AA (2005) Wear of conventional pearlitic and improved bainitic rail steels. Wear 259:391–39910.1016/j.wear.2005.02.058 ↗
16. Smallman RE, Ngan AHW (2010) Physical metallurgy and advanced materials, 1st Indian Reprint. Butterworth-Heinemann, New Delhi 420
17. Bhadeshia HKDH, Lord M, Svensson LE (2003) Silicon-rich bainitic steel welds. In: Proceedings of international conference: joining and welding solutions to industrial problems. JWRI Osaka University, pp 43–52
18. Bhadeshia HKDH, Edmonds DV (1979) The bainite transformation in a silicon steel. Metall Trans A 10:895–90710.1007/BF02658309 ↗
19. Caballero FG, Miller MK, Babu SS, Mateo CG (2007) Atomic scale observations of bainite transformation in a high carbon high silicon steel. Acta Mater 55:381–39010.1016/j.actamat.2006.08.033 ↗
20. Cooman BCD (2004) Structure-properties relationship in TRIP steels containing carbide-free bainite. Curr Opin Solid State Mater Sci 8(3–4):285–30310.1016/j.cossms.2004.10.002 ↗
21. Hashimoto S, Ikeda S, Sugimoto K-I, Miyake S (2004) Effects of Nb and Mo addition to 0.2 % C–1.5 % Si–1.5% Mn steel on mechanical properties of hot rolled TRIP-aided steel sheets. ISIJ Int 44(9):1590–159810.2355/isijinternational.44.1590 ↗
22. Thompson SW, Colvin DJ, Krauss G (1990) Continuous cooling transformations and microstructures in a low-carbon, high-strength low-alloy plate steel. Metall Trans A 21:1493–150710.1007/BF02672564 ↗
23. Caballero FG, Bhadeshia HKDH (2004) Very strong bainite. Curr Opin Solid State Mater Sci 8:251–25710.1016/j.cossms.2004.09.005 ↗
24. Jacques PJ, Ladrière J, Delannay F (2001) On the influence of interactions between phases on the mechanical stability of retained austenite in transformation-induced plasticity multiphase steels. Metall Mater Trans A 32(A):2759–276810.1007/s11661-001-1027-4 ↗
25. Hulka K (2003) Modern multi-phase steels for the automotive industry. Mater Sci Forum 414–415:101–11010.4028/www.scientific.net/MSF.414-415.101 ↗
26. Dhua SK, Mukherjee D, Sarma SD (2003) Effect of cooling rate on the as-quenched microstructure and mechanical properties of HSLA-100 steel plates. Metall Mater Trans A 3(A):2493–250410.1007/s11661-003-0009-0 ↗
27. Ghosh A, Das S, Chatterjee S, Rao PR (2006) Effect of cooling rate on structure and properties of an ultra-low carbon HSLA-100 grade steel. Mater Charact 56:59–6510.1016/j.matchar.2005.09.014 ↗
28. Blekkenhorst F, Ferrari GM, Van Der Wekken CJ, Ijsseling FP (1986) Development of high strength low alloy steels for marine applications: part 1—results of long term exposure tests on commercially available and experimental steels. Br Corros J 21(3):163–17610.1179/000705986798272136 ↗
29. Caballero FG, Allain S, Cornide J, Puerta Velásquez JD, Garcia-Mateo C, Miller MK (2013) Design of cold rolled and continuous annealed carbide-free bainitic steels for automotive application. Mater Des 49:667–68010.1016/j.matdes.2013.02.046 ↗
30. Cho SH, Kim SI, Yoo YC (1997) Determination of “no-recrystallization” temperature of Invar alloy by fractional softening measurement during the multistage deformation. J Mater Sci Lett 16:1836–183710.1023/A:1018581005040 ↗
31. Vervynckt S, Verbeken K, Thibaux P, Liebeherr M, Houbaert Y (2009) Austenite recrystallization–precipitation interaction in niobium microalloyed steels. ISIJ Int 49(6):911–92010.2355/isijinternational.49.911 ↗
32. Li Z, Wu D (2006) Effects of hot deformation and subsequent austempering on the mechanical properties of Si–Mn TRIP steels. ISIJ Int 46(1):121–12810.2355/isijinternational.46.121 ↗
33. El Mehtedi M, Spinarelli S, Zrnik J (2010) Effect of thermomechanical processing on the microstructure of Si-Mn TRIP steel. La Metall Ital 10:5–10
34. Voort GFV (2007) Metallography: principles and practice. McGraw-Hill Book Company, New York, pp 213–216
35. Tanaka K, Hara M, Nakanishi K, Capdevila C (2009) Prediction of bainite intervened in ferrite-pearlite forging steel II: experimental evaluation. Mater Trans JIM 50(3):556–56110.2320/matertrans.MRA2008332 ↗
36. Rajan TV, Sharma CP, Ashok S (2011) Heat treatment: principles an techniques, 2nd edn. PHI Learning Pvt. Ltd., New Delhi, pp 73–76
37. Olasolo M, Uranga P, Rodriguez-Ibabe JM, López B (2011) Effect of austenite microstructure and cooling rate on transformation characteristics in a low carbon Nb–V microalloyed steel. Mater Sci Eng A 528:2559–256910.1016/j.msea.2010.11.078 ↗
38. Gupta C, Chakravartty JK, Banerjee S (2013) Microstructure, deformation and fracture behavior of Cr–Mo–V steels. Int J Metall Eng 2(2):142–148
39. Caseiro JF, Oliveira JA, Andrade-Campos A (2011) Thermomechanical modelling strategies for multiphase steels. Int J Mech Sci 53:720–73310.1016/j.ijmecsci.2011.06.004 ↗
40. Ishida K (1995) Calculation of the effect of alloying elements on the MS temperature in steels. J Alloys Compd 220:126–13110.1016/0925-8388(94)06002-9 ↗
41. Sung HK, Sohn SS, Shin SY, Lee S, Kim NJ, Chon SH, Yoo JY (2012) Effects of finish rolling temperature on inverse fracture occurring during drop weight tear test of API X80 pipeline steels. Mater Sci Eng A 541:181–18910.1016/j.msea.2012.02.019 ↗
42. Girault E, Jacques P, Harlet P, Mols K, Humbeeck JV, Aernoudt E, Delannay F (1998) Metallographic methods for revealing the multiphase microstructure of TRIP-assisted steels. Mater Charact 40:111–11810.1016/S1044-5803(97)00154-X ↗
43. Wang J, Li G, Xiao A (2011) A bainite-ferrite multi-phase steel strengthened by Ti-microalloying. Mater Trans JIM 52(11):2027–203110.2320/matertrans.M2011009 ↗
44. Thompson SW, Colvin DJ, Krauss G (1988) On the bainitic structure formed in a modified A710 steel. Scr Metall 22:1069–107410.1016/S0036-9748(88)80105-4 ↗
45. Bramfitt BL, Speer JG (1990) A perspective on the morphology of bainite. Metall Trans A 21:817–82910.1007/BF02656565 ↗
46. Jimenez-Melero E, Dijk NHV, Zhao L, Sietsma J, Offerman SE, Wright JP, Zwaag SVD (2007) Martensitic transformation of individual grains in low-alloyed TRIP steels. Scr Mater 56:421–42410.1016/j.scriptamat.2006.10.041 ↗
47. Manohar PA, Chandra T (1998) Continuous cooling transformation behaviour of high strength microalloyed steels for linepipe applications. ISIJ Int 38(7):766–77410.2355/isijinternational.38.766 ↗
48. Lienhard JH IV, Lienhard VJH (2011) A heat transfer textbook, 4th edn. Phlogiston Press, Cambridge, p 10
49. Garcia-Mateo C, Caballero FG, Bhadeshia HKDH (2003) Acceleration of low-temperature bainite. ISIJ Int 43(11):1821–182510.2355/isijinternational.43.1821 ↗
50. Koistinen DP, Marburger RE (1959) A general equation prescribing the extend of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels. Acta Metall 7:59–6010.1016/0001-6160(59)90170-1 ↗
51. Lee M-G, Kim S-J, Han HN, Jeong WC (2009) Implicit finite element formulations for multi-phase transformation in high carbon steel. Int J Plast 25:1726–175810.1016/j.ijplas.2008.11.010 ↗
52. Dieter GE (1988) Mechanical metallurgy. SI metric edition. McGraw-Hill Book Company, Singapore, p 283
53. Byun TS, Kim IS (1993) Tensile properties and inhomogeneous deformation of ferrite-martensite dual-phase steels. J Mater Sci 28(11):2923–2932. doi: 10.1007/BF0035469510.1007/BF00354695 ↗
54. Xiurong Z, Yunbo C, Miaohui W (2012) Study on microstructures and work hardening behavior of ferrite-martensite dual-phase steels with high-content martensite. Mater Res 15(6):915–92110.1590/S1516-14392012005000118 ↗
55. Ishikawa N, Yasuda K, Sueyoshi H, Endo S, Ikeda H, Morikawa T, Higashida K (2015) Microscopic deformation and strain hardening analysis of ferrite-bainite dual-phase steels using micro-grid method. Acta Mater 97:257–26810.1016/j.actamat.2015.06.037 ↗
56. Ozturk F, Polat A, Toros S, Picu RC (2013) Strain hardening and strain rate sensitivity behaviors of advanced high strength steels. JIS Res Int 20(6):68–74