journal article·2005-04

Piezoelectric and magnetic properties of PZT-(Ni0.284Zn0.549Cu0.183)Fe1.984O4 composites

Hsien-Kuang Liu, Jin. H. Huang, Chih-Wen Hsieh, Hsin-Tsung Tu

Journal of Materials Science· Volume 40· Issue 8
Publisher page

Abstract

The piezoelectric/piezomagnetic composite, PZT/Ni0.284Zn0.549Cu0.183Fe1.984O4, was fabricated by the mixed oxide method. The phase assemblage, piezoelectric strain constant and saturation magnetization were investigated. The results indicate that the PZT phase is compatible with Ni0.284Zn0.549Cu0.183Fe1.984O4 phase, and dense diphasic ceramic composites were obtained. It is found that piezoelectric strain constant decreases exponentially as the amount of doped piezomagnetic materials in the composite increases. Correspondingly, saturation magnetization of the composite also decreases with the increasing weight fraction of piezoelectric materials. Three reasons cause the results. First, the grain growth of piezomagnetic phase at the co-sintering temperature reduces grain size and continuity of the piezoelectric phase. Second, the pore size and porosity in composite increase dramatically with increasing amount of piezomagnetic phase. Third, the low resistivity of the composite prevents the poling process and reduces the piezoelectric strain constant. The tailoring of microstructure to achieve a high performance piezoelectric/piezomagnetic composite is proposed based on the analysis.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Composite Material Mechanics · Ultrasonics and Acoustic Wave Propagation · Ultrasound Imaging and Elastography

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. J. H. HUANG and W. S. KUO, J. Appl. Phys. 81(3) (1997) 4889.
2. J. H. HUANG, ibid. 78 (1995) 6491.10.1063/1.360535 ↗
3. J. H. HUANG and W. S. KUO, Acta Metallurgica et Materialia 44(12) (1997) 4889.10.1016/S1359-6454(96)00090-0 ↗
4. J. H. HUANG, Y. H. CHIU and H. K. LIU, J. Appl. Phys. 83(10) (1998) 5364.10.1063/1.367365 ↗
5. Y. BENVENISTE, Phys. Rev. B. 16(51) (1994) 424.
6. J. V. D. BOOMGAARD, D. R. TERREL and R. A. J. BORN, J. Mat. Sci. 9 (1974) 1705.10.1007/BF00540770 ↗
7. J. V. D. BOOMGAARD, A. M. J. G. VAN RUN and J. VAN SUCHTELEN, Ferroelectrics 14 (1976) 727.10.1080/00150197608236711 ↗
8. C. W. NAN, Phys. Rev. B 50 (1994) 6082.10.1103/PhysRevB.50.6082 ↗
9. G. HARSHE, J. P. DOUGHERTY and R. E. NEWNHAM, Int. J. Appl. Electromagn. Mater 4 (1993) 145.
10. M. AVELLANEDA and G. HARSHE, J. Intell. Mater. Syst. Struct. 5 (1994) 501.10.1177/1045389X9400500406 ↗
11. G. SRINIVASAN, National Science Foundation Proposal No. 0072144, U.S.A. (1999).
12. L. P. M. BRACKE and R. G. VAN VLIET, Int. J. Electronics 51(3) (1981) 255.10.1080/00207218108901330 ↗
13. Z. YU and C. ANG, J. Mat. Sci. 13 (2002) 193.
14. J. J. SHROTRI, S. D. KULKARNI, C. E. DESHPANDE, A. MITRA, S. R. SAINKAR, P. S. ANIL KUMAR and S. K. DATE, Mater. Chem. Phys. 59 (2002) 1.10.1016/S0254-0584(99)00019-X ↗
15. J. RYU, S. PRIYA, K. UCHINO and H-E. KIM, J. Electroceram. 8 (2002) 107.10.1023/A:1020599728432 ↗