Direct observation of frictional seizure of mild steel sliding on aluminum by X-ray imaging Part I Methods
Source abstract
Abstract
Many of the mechanical or metallurgical failures originate from subsurface cracks or changes in microstructure of the materials. It would be quite informative to material scientists to view the changes below the surface while testing to get a direct evidence of the mechanisms claimed to be governing a particular process like dislocation movement/grain boundary sliding, crack opening displacement, wear, stress concentration etc. In this work, we have used an X-ray microscope for in-situ observation of interfacial features during the friction and wear testing of mild steel specimens sliding against Al 6061 disk. This technique enables the observation of interfacial features of the hidden contact. Multiple tests were conducted at different sliding speeds of 2, 4 and 5 m/s. The images obtained during the tests indicated the presence of various sub surface processes such as adhesive transfer, stress fields, island formation and roughening. Wear was also found to be concentrated over a certain specific area during the initial part of the test but later the contact developed into a conformal contact following a lumpy transfer of material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical stress and fatigue analysis · Tribology and Wear Analysis · Gear and Bearing Dynamics Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. W. Holzhauer and S. J. Calabrese, ASLE Transactions 30(3) (1987) 302.10.1080/05698198708981761 ↗
2. S. Gunsel, H. A. Spikes and M. Aderin, STLE Tribology Transactions 36(2) (1993) 276.10.1080/10402009308983159 ↗
3. K. HOKKIRIGAWA, in "Surface Modification Technologies VIII," edited by T. S. Sudarshan, and M. Jeandin (The Institute of Materials, 1995) p. 93.
4. T. Kato, K. Hokkirigawa, T. Fukuda, M. Shinooka and J. Takahashi, in "Surface Modification Technologies X," edited by T. S. Sudarshan, K. A. Khor and M. Jeandin (The Institute of Materials, 1997) p. 841.
5. W. A. Glaeser, Wear 73 (1981) 371.10.1016/0043-1648(81)90301-X ↗
6. S. J. Calabrese, F. F. Ling and S. F. Murray, ASLE Trans. 26(4) (1983) 455.10.1080/05698198308981526 ↗
7. Y. Tsuya, K. SAito, R. Takagi and J. Akaoka, in Proc. of Int. Conference onWear of Materials, Dearborn, Michigan, April 1979 (ASME New York, 1979) p. 57.
8. J. Enthoven, H. A. Spikes, Tribology Transactions 39(2) (1996) 441.10.1080/10402009608983550 ↗
9. J. C. Enthoven, P. M. Cann and H. A. Spikes, STLE Tribology Transactions 36(2) (1993) 258.10.1080/10402009308983157 ↗
10. R. Halmshaw, "Non-destructive Testing" (Edward Arnold, London, 1987) p. 16.
11. R. Halmshaw, "Industrial Radiology: Theory and Practice" (Applied Science Publishers, New Jersey, 1982).10.1007/978-94-009-7340-4 ↗
12. R. Halmshaw, in "Proc.4th European Conf. NDT," edited by J. M. Farley and R.W. Nichols (Pergamon Press, Oxford, 1988) Vol. 1, p. 139.
13. W. Hartman, in "Real Time Radiologic Imaging: Medical and Inductrial Applications," ASTM Special Technical Publication 716, edited by D. A. Garrett, and D. A. Bracher (American Society for Testing of Materials, Philadelphia, 1980) p. 201.
14. R. E. Burge, A. G. Michette and P. J. Duke, "X-ray Microscopy and X-ray Imaging, Vol. 1: Scanning Microscope," (1987) p. 891.
15. J. Chikawa, in "Real Time Radiologic Imaging: Medical and Inductrial Applications," ASTM Special Technical Publication 716, edited by D. A., Garrett and D. A. Bracher (American Society for Testing of Materials, Philadelphia, 1980).
16. I. Frumkin, A. Notea and A. Breskin, NDT&E International 27 (1994) 317.10.1016/0963-8695(94)90213-5 ↗
17. L. H. Chen and D. A. Rigney, Wear 136 (1990) 223.10.1016/0043-1648(90)90148-4 ↗
18. Katsuzo Okada, Japanese Journal of Tribology 39(5) (1994) 529.