Density and plastic strain evaluations using small-angle X-ray scattering and finite element simulations for powder compacts of complex shape
Source abstract
Abstract
Previous work suggested that two-dimensional small-angle X-ray scattering (2D-SAXS) could offer a new method for evaluating the local variations of density, strain and principal strain direction within powder compacts, which arise due to the effects of friction and die shape. In order to test this method further, this work compared results from 2D-SAXS with finite element (FE) simulations using a modified density-dependent Drucker–Prager Cap (DPC) model, for compacts of complex shape, prepared using a cylindrical die, a flat-faced upper punch and shaped lower punches with three different central protrusions. Variations in compaction behaviour were observed, which were due to friction against the die walls and the punch shape. Good agreement was obtained between SAXS measurements and FE simulation, supporting previous indications. Hence, this combination of experimental and computational techniques appeared particularly powerful for investigating powder compaction behaviour, in considerable accuracy and detail. Moreover, observations of the compaction behaviour in the vicinity of the central protrusion may be relevant to tablets with embossed features or compacted artefacts of more complex shape.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. Laity PR, Cameron RE (2008) Powder Technol 188:11910.1016/j.powtec.2008.04.006 ↗
2. Laity PR, Cameron RE (2009) Powder Technol 192:28710.1016/j.powtec.2009.01.010 ↗
3. Laity PR, Cameron RE (2010) Powder Technol 198:40410.1016/j.powtec.2009.12.005 ↗
4. Laity PR, Han LH, Elliott JA, Cameron RE (2010) J Pharm Sci 99:438010.1002/jps.22144 ↗
5. Laity PR, Cassidy AMC, Skepper J, Jones W, Cameron RE (2010) Eur J Pharm Biopharm 74:37710.1016/j.ejpb.2009.10.006 ↗
6. Sperl M (2006) Granular Matter 8:5910.1007/s10035-005-0224-z ↗
7. Pitman EB (1998) Phys Rev E 57:317010.1103/PhysRevE.57.3170 ↗
8. Busignies V, Leclerc B, Porion P, Evesque P, Courraze G, Tchoreloff P (2006) Eur J Pharm Biopharm 64:3810.1016/j.ejpb.2006.02.007 ↗
9. Wu C-Y, Ruddy OM, Bentham AC, Hancock BC, Best SM, Elliott JA (2005) Powder Technol 152:10710.1016/j.powtec.2005.01.010 ↗
10. Sinka IC, Burch SF, Tweed JH, Cunningham JC (2004) Int J Pharm 271:21510.1016/j.ijpharm.2003.11.022 ↗
11. Eiliazadeh B, Pitt K, Briscoe B (2004) Int J Solid Struct 41:596710.1016/j.ijsolstr.2004.05.055 ↗
12. Djemai A, Sinka IC (2006) Int J Pharm 319:5510.1016/j.ijpharm.2006.03.049 ↗
13. Brewin P, Coube O, Doremus P, Tweed JH (2007) Modelling of powder die compaction. Springer Publishing Co., New York10.1007/978-1-84628-099-3 ↗
14. Kremer DM, Hancock BC (2006) J Pharm Sci 95:51710.1002/jps.20583 ↗
15. Cunningham JC, Sinka IC, Zavaliangos A (2004) J Pharm Sci 93:202210.1002/jps.20110 ↗
16. Sinka IC, Cunningham JC, Zavaliangos A (2003) Powder Technol 133:3310.1016/S0032-5910(03)00094-9 ↗
17. Sinka IC, Cunningham JC, Zavaliangos A (2004) J Pharm Sci 93:204010.1002/jps.20111 ↗
18. Samimi A, Hassanpour A, Ghadiri M (2005) Chem Eng Sci 60:399310.1016/j.ces.2005.02.036 ↗
19. Hassanpour A, Ghadiri M (2004) Powder Technol 141:25110.1016/j.powtec.2004.02.010 ↗
20. Michrafy A, Dodds JA, Kadiri MS (2004) Powder Technol 148:5310.1016/j.powtec.2004.09.021 ↗
21. Michrafy A, Ringenbacher D, Tchorelof P (2002) Powder Technol 127:25710.1016/S0032-5910(02)00119-5 ↗
22. Sinha T, Bharadwaj R, Curtis JS, Hancock BC, Wassgren C (2010) Powder Technol 202:4610.1016/j.powtec.2010.04.001 ↗
23. Sinha T, Curtis JS, Hancock BC, Wassgren C (2010) Powder Technol 198:31510.1016/j.powtec.2009.10.025 ↗
24. Picker KM (2000) Eur J Pharm Biopharm 49:26710.1016/S0939-6411(99)00085-5 ↗
25. Sonnergaard JM (1999) Int J Pharm 193:6310.1016/S0378-5173(99)00319-1 ↗
26. Lordi NG, Cocolas H, Yamasaki H (1997) Powder Technol 90:17310.1016/S0032-5910(96)03211-1 ↗
27. Skrinjar O, Larsson P-L, Storåkers B (2007) Trans ASME 74:16410.1115/1.2165240 ↗
28. Han LH, Elliott JA, Bentham AC, Mills A, Amidon GE, Hancock BC (2008) Int J Solids Struct 45:308810.1016/j.ijsolstr.2008.01.024 ↗
29. Dutt M, Hancock BC, Bentham AC, Elliott JA (2005) Comput Phys Commun 166:2610.1016/j.cpc.2004.10.006 ↗
30. Roe R-J (2000) Methods of X-ray and neutron scattering in polymer science. Oxford University Press, New York
31. Higgins JS, Stein RS (1978) J Appl Cryst 11:34610.1107/S0021889878013485 ↗
32. More information on Image-J and software downloads are available at: https://doi.org/rsbweb.nih.gov/ij/
33. ABAQUS 6.7 documentation, ABAQUS Inc. 2007
34. Mehta A (2007) Granular physics. Cambridge University Press, Cambridge (with contributions from Sir Sam Edwards, Blumenfeld R, Goldhirsch I, Claudin P)10.1017/CBO9780511535314 ↗
35. Zallen R (1998) The physics of amorphous solids. Wiley, New Yok10.1002/9783527617968 ↗
36. Zavaliangos A, Galen S, Cunningham J, Winstead D (2008) J Pharm Sci 97:329110.1002/jps.21229 ↗
37. Klinzing GR, Zavaliangos A, Cunningham J, Mascaro T, Winstead D (2010) Comput Chem Eng 34:108210.1016/j.compchemeng.2010.04.012 ↗
38. Bechard SR, Down GRB (1992) Pharm Res 9:52110.1023/A:1015896414765 ↗
39. Ketolainen J, Ilkka J, Paronen P (1993) Int J Pharm 92:15710.1016/0378-5173(93)90275-K ↗
40. Wurster DE, Rowlings CE, Creekmore JR (1995) Int J Pharm 116:17910.1016/0378-5173(94)00289-H ↗
41. Buckner IS, Friedman RA, Wurster DE (2010) J Pharm Sci 99:86110.1002/jps.21881 ↗