Laser bonding and characterization of Kapton® FN/Ti and Teflon® FEP/Ti systems
Source abstract
Abstract
Kapton® FN and Teflon® FEP (fluorinated ethylene propylene) polymers are resistant to most chemical solvents, heat sealable, and have low moisture uptake, which make them attractive as packaging materials for electronics and implantable devices. Kapton® FN/Ti and Teflon® FEP/Ti microjoints were fabricated by using focused infrared laser irradiation. Laser-bonded samples were tested with a micro-testing machine under lap shear load and the bond strength was determined. The bond strength for the Kapton® FN/Ti and Teflon® FEP/Ti systems was found to be 3.32 and 8.48 N/mm2, respectively. The failure mode of the mechanically tested samples was studied by using optical microscopy and scanning electron microscopy coupled with energy dispersive X-ray spectroscopy. Chemical interactions during laser bonding of Kapton® FN to titanium were studied by using X-ray photoelectron spectroscopy (XPS). The XPS results give evidence for the formation of Ti–F bonds in the interfacial region.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 3D IC and TSV technologies · Additive Manufacturing and 3D Printing Technologies · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Kim ET, Seo JM, Zhou JA, Jung H, Kim SJ (2004) IEEE international workshop on biomedical circuits & systems, p 12
2. Lee KK, He J, Singh A, Massia S, Ehteshami G, Kim B, Raupp G (2004) J Micromech Microeng 14:3210.1088/0960-1317/14/1/305 ↗
3. Massey LK (2003) Permeability properties of plastics and elastomers: a guide to packaging and barrier materials, 2nd edn. Plastics Design Library10.1016/B978-188420797-6.50095-4 ↗
4. Bauer I, Russek UA, Herfurth H, Witte R, Heinemann S, Newaz G, Mian A, Georgiev D, Auner G (2004) Proceedings of SPIE—Photonics West LASE 2004: lasers and applications in science and engineering conference, vol 5339, p 454
5. Mian A, Newaz G, Vendra L, Rahman N, Georgiev DG, Auner G, Witte R, Herfurth H (2005) J Mater Sci Mater Med 16:22910.1007/s10856-005-6684-1 ↗
6. Georgiev DG, Sultana T, Mian A, Auner G, Herfurth H, Witte R, Newaz G (2005) J Mater Sci 40:5641. doi:https://doi.org/10.1007/s10853-005-1291-610.1007/s10853-005-1291-6 ↗
7. Newaz G, Mian A, Sultana T, Mahmood T, Georgiev DG, Auner G, Witte R, Herfurth H (2006) J Biomed Mater Res A 79:15910.1002/jbm.a.30709 ↗
8. Georgiev GL, Sultana T, Baird RJ, Auner G, Newaz G, Patwa R, Herfurth H (2008) Appl Surf Sci 254:717310.1016/j.apsusc.2008.05.294 ↗
9. Shi MK, Lamontagne B, Selmani A, Martinu L, Sacher E, Wertheimer MR, Yelon A (1994) J Vac Sci Technol A 12:80710.1116/1.578827 ↗
10. Du M, Opila RL, Case C (1998) J Vac Sci Technol A 16:15510.1116/1.580964 ↗
11. Chang CA, Kim YY, Schrott AG (1990) J Vac Sci Technol A 8:330410.1116/1.576583 ↗
12. Carlo SR, Perry CC, Torres J, Wagner AJ, Vectis C, Faibrother DH (2002) Appl Surf Sci 195:9310.1016/S0169-4332(02)00539-1 ↗
13. Lu M, Qian Z, Ren W, Liu S, Shangguan D (1999) Int J Solids Struct 36:6510.1016/S0020-7683(97)00281-3 ↗
14. Sultana T, Newaz G, Georgiev GL, Baird RJ, Auner GW, Patwa R, Herfurth HJ (2008) J Mater Sci (submitted)
15. Rasoul FA, Hill DJT, George GA, O’Donnell JH (1996) Polym Adv Technol 9:2410.1002/(SICI)1099-1581(199801)9:1<24::AID-PAT730>3.0.CO;2-5 ↗
16. Baklanov MR, Vanhaelemeersch S, Storm W, Vandervorst W, Maex K (1998) J Vac Sci Technol B 16:16410.1116/1.589773 ↗
17. Ramqvist L, Hamrin K, Johansson G, Fahlmann A, Nordling C (1969) J Phys Chem Solids 30:183510.1016/0022-3697(69)90252-2 ↗
18. Franzen HF, Umana MX, McCreary JR, Thorn RJ (1976) J Solid State Chem 18:36310.1016/0022-4596(76)90119-5 ↗
19. Fracassi F, d’Aagostino R (1992) Pure Appl Chem 64:70310.1351/pac199264050703 ↗