Incorporation of the heating effect of the light source in a non-isothermal model of a visible-light-cured resin composite
Source abstract
Abstract
Recent non-isothermal reaction rate models of light cured resins presented by various researchers do not take into account the increase of the temperature due to the absorption and scattering of light energy within the resin. However, the reaction rate is a strong function of temperature and hence all the calculations performed not adopting this factor are not revealing the true characteristics of the cure process. In this work, the heating effect of the light source is calculated from simple DSC measurements commonly performed after the initial cure of the specimens is recorded. An additional deconvolution procedure of these irradiant heat flow measurements is also presented as well as numerical results from a simple two dimensional model illustrating the differences that result from the inclusion of this parameter in the non-isothermal calculations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Epoxy Resin Curing Processes · Heat Transfer and Numerical Methods · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. J. F. Stevenson, Polym. Eng. Sci. 26 (1986) 746.10.1002/pen.760261106 ↗
2. W. D. Cook, Polymer 33 (1992) 600.10.1016/0032-3861(92)90738-I ↗
3. P. W. K. Lam, H. P. Plaumann and T. Tran, J. Appl. Polym. Sci. 41 (1990) 3043.10.1002/app.1990.070411137 ↗
4. J. M. Kenny and A. Trivisano, Polym. Eng. Sci. 31 (1991) 1426.10.1002/pen.760311909 ↗
5. A. Maffezzoli, A. Dellapietra, S. Rengo, L. Nicolais and G. Valletta, Biomaterials 15 (1994) 1221.10.1016/0142-9612(94)90273-9 ↗
6. D. Pananakis and D. C. Watts, Polymer, submitted.
7. A. Maffezzoli, R. Terzi and L. Nicolais, J. Mater. Sci.: Mater. Med. 6 (1995) 161.
8. L. Flach and R. P. Chartoff, Polym. Eng. Sci. 35 (1995) 483.10.1002/pen.760350605 ↗
9. R. P. Chartoff Idem., ibid. 35 (1995) 493.10.1002/pen.760350606 ↗
10. E. Fisher, W. Kunze and B. Stapp, Perkin Elmer Analysentechniche Berichte (Report on Analysis Techniques) 1988, p. 1.
11. D. Pananakis and E. W. Abel, Thermochim. Acta 315 (1998) 107.10.1016/S0040-6031(98)00280-9 ↗
12. J. Vaidyanathan and T. K. Vaidyanathan, J. Mater. Sci.: Mater. Med. 3 (1992) 19.
13. F. Kreith and M. Bohn, “Principles of Heat Transfer,” 5th ed. (West Publishing Company, St. Paul, MN., 1995) p. 80.
14. K. G. T. Hollands, G. D. Raithby and L. Konicek, Int. J. Heat Mass Tran. 18 (1975) 879.10.1016/0017-9310(75)90179-9 ↗
15. O. C. Zienkiewicz and R. L. Taylor, “The Finite Element Method, Vol. 2: Solid and Fluid Mechanics Dynamics and Non-Linearity,” 4th ed. (McGraw-Hill, London, 1991) pp. 269 and 352.
16. J. F. Mccabe and H. J. Wilson, J. Oral Rehabil. 7 (1980) 103.10.1111/j.1365-2842.1980.tb00425.x ↗
17. C. H. Lloyd, Biomaterials 2 (1981) 179.10.1016/0142-9612(81)90048-X ↗
18. American Society For Testing and Materials, in Annual Book of ASTM Standards: E 1269-95.
19. G. Toworfe, PhD thesis, University of Manchester, Manchester, UK, 1998.
20. D. C. Watts and R. Smith, J. Dent. Res. 60 (1980) 1972.10.1177/00220345810600120801 ↗
21. J. H. P. Devree, M. Peters and A. J. M. Plasschaert, ibid. 63 (1984) 1217.10.1177/00220345840630101001 ↗
22. T. A. M. Spierings, F. Bosman, M. Peters and A. J. M. Plasschaert, Dent. Mater. 4 (1988) 51.10.1016/S0109-5641(88)80089-7 ↗
23. M. M. Winkler, T. R. Katona and N. H. Paydar, J. Dent. Res. 75 (1996) 1477.10.1177/00220345960750070701 ↗
24. A. Versluis, W. H. Douglas, M. Cross and R. L. Sakaguchi, ibid. 75 (1996) 871.10.1177/00220345960750030301 ↗
25. D. C. Watts, in “Dental and Medical Materials,” Vol. 14, edited by D. F. Williams(Weinheim, FRG:VCH Verlagsgesellschaft mbH., 1992) Ch. 6, p. 209. Materials Science and Technology: A Comprehensive Treatment, edited by R. W. Cahn, P. Haasen and E. J. Kramer.