journal article·2007-08-28

Study on the non-isothermal crystallization behaviors of PA6/silica nanocomposites prepared by the sol–gel process

Caixian Zhao, Ping Zhang, Shaorong Lu, Jiangping He, Xiayu Wang

Journal of Materials Science· Volume 42· Issue 21
Publisher page

Abstract

A organic–inorganic PA6/partially functionalized silica hybrid nanocomposites was prepared by caprolactam polymerized and silica nanoparticles in situ gernerated through condensation of partially functionalized silicic acid, which was prepared through hydrolysis of tetraethoxysilane (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTES), in one process. The non-isothermal crystallization behaviors of pure PA6, PA6/unfunctionalized silica (PA6S) and PA6/functionalized silica (PA6FS) hybrid materials were investigated by differential scanning calorimetry (DSC). Two methods, namely, the Avrami and the Mo, were applied to describe the crystallization process of these three materials. DSC results showed that the crystallization rates of PA6FS is faster than that of pure PA6 and PA6S at the same cooling rate, the nano-silica particles functionalized by GPS in hybrid material acted as more effective nucleation agents, and the crystallization rates of all these samples increased with the cooling rate increasing. XRD results indicated that the addition of functionalized nano-silica particles favored the formation of the γ crystalline form.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · biodegradable polymer synthesis and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Schmidt H (1985) Non-cryst Solids 73:68110.1016/0022-3093(85)90388-6 ↗
2. Wen JY, Wilkes GL (1996) Chem Mater 8:166710.1021/cm9601143 ↗
3. Yang F, Ou YC, Yu ZZ (1998) J Appl Polym Sci 69:35510.1002/(SICI)1097-4628(19980711)69:2<355::AID-APP17>3.0.CO;2-V ↗
4. Balazs AC, Singh C, Zhulina E (1998) Macromolecules 31:837010.1021/ma980727w ↗
5. Hajji P, David L, Gerard JF, Paul C (1999) J Polym Sci B37:317210.1002/(SICI)1099-0488(19991115)37:22<3172::AID-POLB2>3.0.CO;2-R ↗
6. Reynaud E, Jouen T, Gauthier C, Vigier G, Varlet J (2001) Polymer 42:875910.1016/S0032-3861(01)00446-3 ↗
7. Li Y, Yu J, Guo ZX (2002) J Appl Polym Sci 84:82710.1002/app.10349 ↗
8. Wu QJ, Liu XH, Lars AB (2002) Polymer 43:244510.1016/S0032-3861(01)00810-2 ↗
9. Zhang P, Wang XY, Wei SS (2004) A direct method for synthesize PA6/inorganic nanocomposites. China Patent: ZL021398369.4
10. Zhao CX, Zhang P, He JP, Lu SR, Wang XY (2007) Poly Mater Sci Eng (Chinese) 23(1):218
11. Liu XH, Wu QJ (2002) Eur Poly J 38:138310.1016/S0014-3057(01)00304-4 ↗
12. Fornes TD, Paul DR (2003) Polymer 44:394510.1016/S0032-3861(03)00344-6 ↗
13. Tol RT, Mathot VBF, Groeninckx G (2005) Ploymer 46:295510.1016/j.polymer.2005.02.020 ↗
14. Avrami M (1940) J Chem Phys 8:21210.1063/1.1750631 ↗
15. Celina M, George GA (1995) Degrad Stab 48:29710.1016/0141-3910(95)00053-O ↗
16. Ozawa T (1971) Polymer 12:15010.1016/0032-3861(71)90041-3 ↗
17. Liu JP, Mo ZS (1991) China Polym Bull (in Chinese) 4:199
18. Liu TX, Mo ZS, Wang SG et al (1997) Polym Eng Sci 37:56810.1002/pen.11700 ↗
19. Men YF, Rieger J (2004) Euro Poly J 40:262910.1016/j.eurpolymj.2004.07.003 ↗
20. Campoy I, Gόmez MA, Marco C (1998) Polymer 39:627910.1016/S0032-3861(98)00181-5 ↗
21. Murthy NS, Curran SA, Aharoni SM, Minor H (1991) Macromolecules 24:321510.1021/ma00011a027 ↗
22. Lincoln DM, Vaia RA, Wang ZG, Hsiao BS (2001) Polymer 42:162110.1016/S0032-3861(00)00414-6 ↗