journal article·2008-06

Hot-pressed phosphate glass–ceramic matrix composites containing calcium phosphate particles for nuclear waste encapsulation

E. M. Michie, R. W. Grimes, A. R. Boccaccini

Journal of Materials Science· Volume 43· Issue 12
Publisher page

Abstract

Sodium aluminium phosphate (NaAlP) glass–ceramic composites were produced as potential wasteforms for the immobilization of special categories of halide-containing radioactive waste. Sintering conditions for encapsulating a simulated waste (a calcinated mixture of calcium phosphate host and various oxides) in the cold-pressed NaAlP glass–ceramic were first determined and the results were compared with similar samples prepared by hot pressing. In both cases, the conditions aimed to provide a very high-density material, via as low production temperatures as possible, in conjunction with a high waste loading (75 wt.% simulated waste to 25 wt.% glass). It was found that by hot pressing and using a NaAlP glass–ceramic containing 2 mol% B2O3, significantly lower temperatures could be employed compared to the cold pressing and sintering route. The lowest temperature at which a sufficiently dense hot-pressed product was achieved (86% theoretical density), that exhibited mechanical properties similar to those of borosilicate glass (e.g. Young’s modulus 67 ± 2 GPa), was 550 °C. This processing temperature is considerably lower than values reported in the literature for similar systems. As such, hot pressing can be considered as a convenient technique for the fabrication of this type of composite for waste encapsulation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear materials and radiation effects · Advanced ceramic materials synthesis · Microwave Dielectric Ceramics Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Ojovan MI, Lee WE (2005) An introduction to nuclear waste immobilisation. Elsevier Ltd., Oxford, UK
2. Donald IW, Metcalfe BL, Taylor RNJ (1997) J Mater Sci 32(22):585110.1023/A:1018646507438 ↗
3. Metcalfe BL, Fong SK, Donald IW (2004) In: Oversby VM, Werme LO (eds) Materials research society symposium proceedings, vol 807. Warrendale, PA, pp 255–260
4. Ewing RC (1999) Proc Natl Acad Sci 96(7):343210.1073/pnas.96.7.3432 ↗
5. Donald IW, Metcalfe BL, Fong SK, Gerrard LA, Strachan DM, Scheele RD (2007) J Nucl Mater 361(1):7810.1016/j.jnucmat.2006.11.011 ↗
6. Donald IW (2004) Discovery: Sci Technol J AWE 9:2
7. Metcalfe BL, Donald IW (2004) J Non-Cryst Solids 348:22510.1016/j.jnoncrysol.2004.08.173 ↗
8. Donald IW, Metcalfe BL, Fong SK (2006) J Non-Cryst Solids 352:299310.1016/j.jnoncrysol.2006.04.007 ↗
9. Raman SV (1998) J Mater Sci 33(7):188710.1023/A:1004313623562 ↗
10. Pace S et al (2005) J Nucl Mater 341(1):1210.1016/j.jnucmat.2005.01.005 ↗
11. Boccaccini AR, Berthier T, Seglem S (2007) Ceram Int 33:123110.1016/j.ceramint.2006.03.030 ↗
12. Saewong P (1998) PhD Thesis, Department of Materials, Imperial College, London, pp 45–47
13. Morton RD (1961) Norsk geologisk tidsskrift 41:223
14. Boccaccini AR, Riaz S, Moisescu C (2001) J Mater Sci Lett 20(19):180310.1023/A:1012547503056 ↗
15. Lawn BR, Marshall DB (1979) J Am Ceram Soc 62:34710.1111/j.1151-2916.1979.tb19075.x ↗
16. Boccaccini AR (1997) J Mater Process Technol 65:30210.1016/S0924-0136(96)02275-3 ↗