journal article·2010-04

The optimum contact angle range for metal foam stabilization: an experimental comparison with the theory

A. J. Klinter, C. A. Leon, R. A. L. Drew

Journal of Materials Science· Volume 45· Issue 8
Publisher page

Abstract

Using the powder metallurgy (PM) route, metal foam precursors were produced from pure aluminum, Al–1 Mg, Al–7Cu, and Al–11.5Si containing 1 wt% TiH2 as blowing agent and 8 vol% Al2O3 as stabilizer. Subsequent foaming of these precursors in an expandometer at 90 and 140 °C above the melting point or the liquidus temperature of the metal produced expansion curves for each metal/Al2O3 composition. These expansion curves, as well as foaming experiments (interrupted at maximum expansion as well as 5 min after maximum expansion), were used to judge the stability of the foams produced from the different metal/Al2O3 compositions. Foam stability and wetting behavior of the same metal/Al2O3 combinations were used to evaluate the validity of contact angle measurements during idealized wetting experiments to be used to predict promising metal/stabilizing ceramic particle combinations for foam production based on the model proposed by Kaptay.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cellular and Composite Structures · Pickering emulsions and particle stabilization · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Banhart J (2001) Prog Mater Sci 46:55910.1016/S0079-6425(00)00002-5 ↗
2. Sun YQ, Gao T (2002) Metall Mater Trans A Phys Metall Mater Sci 33:328510.1007/s11661-002-0315-y ↗
3. Kaptay G (1999) In: Banhart J, Ashby MF, Fleck NA (eds) International conference for metal foams and porous metal structures. MIT Press, Bremen, Germany, p 141
4. Kaptay G (2006) Colloids Surf A Physicochem Eng Aspects 282–283:38710.1016/j.colsurfa.2005.12.021 ↗
5. Jin I, Kenny LD, Sang H (1991) Lightweight foamed metal and its production, at the international patent application. Alcan International Limited, Canada
6. Kenny LD, Thomas M (1994) Process and apparatus for shape casting of particle stabilized metal foam, at the international patent application. Alcan International Limited, Canada
7. Asavavisithchai S, Kennedy AR (2006) Scripta Mater 54:133110.1016/j.scriptamat.2005.12.015 ↗
8. Kennedy AR, Asavavisithchai S (2004) Adv Eng Mater 6:40010.1002/adem.200405145 ↗
9. Esmaeelzadeh S, Simchi A, Lehmhus D (2006) Mater Sci Eng A 424:29010.1016/j.msea.2006.03.013 ↗
10. Haesche M, Weise J, Garcia-Moreno F, Banhart J (2008) Mater Sci Eng A 480:28310.1016/j.msea.2007.07.040 ↗
11. Körner C (2008) Mater Sci Eng A 495:22710.1016/j.msea.2007.09.089 ↗
12. Weigand P (1999) PhD Thesis, RWTH Aachen, Aachen
13. Klinter AJ, Mendoza-Suarez G, Drew RAL (2008) Mater Sci Eng A 495:14710.1016/j.msea.2007.10.113 ↗
14. Aguirre-Perales LY (2010) PhD-Thesis, McGill University, Montreal, Canada (to be published)
15. Nakae H, Kota K (2005) In: Nakajiama H, Kanetake N (eds) International conference on porous metals and metal foaming technology—MetFoam 2005. Japan Institute of Metals, Kyoto, Japan, p 87