journal article·2007-06

Effect of bentonite on the structure and mechanical properties of CE/CTBN system

Zhengping Fang, Honghao Shi, Aijuan Gu, Yu Feng

Journal of Materials Science· Volume 42· Issue 12
Publisher page

Abstract

Cyanate ester (CE) resins are among the most important engineering thermosetting polymers and have received attention because of their outstanding physical properties. However, their main drawback is brittleness. Toughening by rubbers is a notable way to improve the toughness but unfortunately it decreases the modulus and thermostability. The CE/carboxyl terminal butadiene-acrylonitrile (CTBN)/bentonite (BT, a kind of clay) composites were prepared by two-step melt blending of CE, CTBN and amino-modified bentonite. The nanostructure and mechanical properties of the CE/CTBN/BT composites were studied by X-ray diffraction (XRD), transmission electron microscopy (TEM) and dynamic mechanical analysis (DMA). Both of the intercalated and exfoliated structures of BT existed in CE/CTBN/BT composites while rubber particles also could be observed in CE/CTBN/BT composites by TEM. When an appropriate amount (about 0.5 wt.%) of BT added into CE/CTBN (100/10 by weight) system, both of the modulus and impact strength increased. A 30% increase of the modulus was obtained without greatly sacrificing the impact strength of the composite when the BT content was 1 wt.%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Epoxy Resin Curing Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. Hamerton I (ed) (1994) Chemistry and technology of cyanate ester resins. Blackie Academic and Professional, Glasgow (and references cited therein)10.1007/978-94-011-1326-7 ↗
2. Auad ML, Aranguren MI, Borrajo J (2001) Polymer 42:650310.1016/S0032-3861(01)00048-9 ↗
3. Auad ML, Frontini PM, Borrajo J, Aranguren MI (2001) Polymer 42:372310.1016/S0032-3861(00)00773-4 ↗
4. Partridge IK, Maistros GM (1995) Plast Rubber Compos Process Appl 23:325
5. Hillermerier RW, Hayes BS, Seferis JC (1999) Polym Compos 20:15510.1002/pc.10343 ↗
6. Hayes BS, Seferis JC, Parker GA (2000) Polym Eng Sci 40:134410.1002/pen.11263 ↗
7. Riew CK, Rowe EH, Seibert AR (1976) In: Deanin RD, Crugnola AM (eds) Toughness and brittleness of plastics. Advances in chemistry series, No. 154. American Chemical Society, Washington, DC, p 32610.1021/ba-1976-0154.ch027 ↗
8. Feng Y, Fang ZP, Gu AJ (2004) Polym Adv Technol 15:62810.1002/pat.519 ↗
9. Alexandre M, Dubois P (2000) Mater Sci Eng R 28:110.1016/S0927-796X(00)00012-7 ↗
10. Hammerton I (1994) Chemistry and technology of cyanate esters. Chapman & Hall London, p 20810.1007/978-94-011-1326-7 ↗
11. Giannelis EP (1996) Adv Mater 8:2910.1002/adma.19960080104 ↗
12. Wang Z, Pinnavaia TJ (1998) Chem Mater 10:376910.1021/cm980448n ↗
13. Vaia RA, Jandt KD, Kramer EJ, Giannelis EP (1996) Chem Mater 8:262810.1021/cm960102h ↗
14. Ogawa M, Shirai H, Kuroda K (1992) Clay Clay Miner 40:48510.1346/CCMN.1992.0400501 ↗
15. Vaia RA, Ishii H, Giannelis EP (1993) Chem Mater 5:169410.1021/cm00036a004 ↗
16. Messersmith PB, Giannelis EP (1994) Chem Mater 6:171910.1021/cm00046a026 ↗
17. Lee D, Char K (2002) Polym Degrad Stabil 75:55510.1016/S0141-3910(01)00259-2 ↗
18. Chiang CL, Ma CCM, Wang FY, Kuan HC (2003) Eur Polym J 39:82510.1016/S0014-3057(02)00283-5 ↗
19. Gu AJ, Liang GZ (2003) Polym Degrad Stabil 80:38310.1016/S0141-3910(03)00026-0 ↗
20. Feng Y, Fang ZP, Mao W, Gu AJ (2005) J Appl Polym Sci 96:63210.1002/app.21470 ↗
21. Riew CK, Gillham JK (eds) (1984) Rubber modified thermoset resins. American Chemical Society, Washington, DC
22. Huang Y, Kinloch AJ, Bertsch RJ, Seibert AR (1993) In: Riew CK, Kinloch AJ (eds) Toughened plastics I, science and engineering. American Chemical Society, Washington, DC, p 18910.1021/ba-1993-0233.ch008 ↗
23. Wang Z, Pinnavaia TJ (1998) Chem Mater 10:376910.1021/cm980448n ↗
24. Ganguli S, Dean D, Jordan K, Price G, Vaia R (2003) Polymer 44:131510.1016/S0032-3861(02)00709-7 ↗