journal article·2012-12Open access

Wetting of Al pads by Sn–8.8Zn and Sn–8.7Zn–1.5(Ag, In) alloys

Przemysław Fima, Katarzyna Berent, Janusz Pstruś, Tomasz Gancarz

Journal of Materials Science· Volume 47· Issue 24

Abstract

Wetting of Al (99 %) pads by Sn–8.8Zn, Sn–8.7Zn–1.5In, and Sn–8.7Zn–1.5Ag (wt%) alloys was studied by means of the sessile drop method. The tests were carried out at 250 °C, using Amasan ALU33® flux, for up to 60 min. We used a setup that allows fast transfer of a sample to and from the hot zone of the furnace. Solidified alloy-substrate couples were cross sectioned and examined by scanning electron microscopy and energy dispersive X-ray analysis. The studied alloys wet Al pads as the wetting angles, determined after cleaning the flux residue from solidified alloy-substrate couples, are lower than 35 degrees. Wetting angles of Sn–8.7Zn–1.5Ag (wt%) alloy are higher and wetting areas are smaller than those of the remaining alloys, possibly due to a small gap between the melting and test temperatures. There is no clear dependence of the wetting angle and spreading area on time. Microstructures of cross-sectioned samples indicate that alloys dissolve the substrate and penetrate along grain boundaries. Since there is no significant difference between the same solder/Al interfaces at different wetting times, it is assumed that the microstructure evolves in <5 min.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Wang Z, Wang H, Liu L (2012) Mater Des 39:1410.1016/j.matdes.2012.02.021 ↗
2. Huang MI, Huang YZ, Ma HT, Zhao J (2011) J Electron Mater 40:31510.1007/s11664-010-1459-y ↗
3. Chuang TH, Yeh MS, Tsao LC, Tsai TC, Wu SC (2000) Metall Mater Trans A 31A:223910.1007/s11661-000-0141-z ↗
4. Nagaoka T, Morisada Y, Fukusumi M, Takemoto T (2010) Metall Mater Trans B 41:86410.1007/s11663-010-9375-3 ↗
5. Movahadi M, Kohabi AH, Madaah Hossseini HR (2009) Mater Charact 60:44110.1016/j.matchar.2008.11.010 ↗
6. Suganuma K, Kim KS (2007) J Mater Sci Mater Electron 18:12110.1007/s10854-006-9018-2 ↗
7. Zhang L, Xue SB, Gao LL, Sheng Z, Ye H, Xiao ZX, Zeng G, Chen Y, Yu SL (2010) J Mater Sci Mater Electron 21:110.1007/s10854-009-0014-1 ↗
8. Fima P, Gasior W, Sypien A, Moser Z (2010) J Mater Sci 45:4339. doi: 10.1007/s10853-010-4291-010.1007/s10853-010-4291-0 ↗
9. Reed SJB (1996) Electron microprobe analysis and scanning electron microscopy in geology. University Press, Cambridge
10. Klein-Wassink RJ (1989) Soldering in electronics, 2nd edn. Electrochemical Publications Ltd, Ayr
11. Takemoto T, Miazaki M (2001) Mater Trans 42:74510.2320/matertrans.42.745 ↗
12. SOLDERS Database for Lead Free Solders. http://www.npl.co.uk/science-technology/advanced-materials/materialsareas/thermodynamics/thermodynamic-databases-for-mtdata . Accessed 2 May 2012
13. Pstrus J, Fima P, Gancarz T (2012) J Mater Eng Perform 21:60610.1007/s11665-012-0174-7 ↗
14. COST 507 Thermodynamic database for light alloys. http://www.met.kth.se/~bosse/BOOK/databases/databases.html . Accessed 2 May 2012
15. Li Y, Leng X, Cheng S, Yan J (2012) Mater Des 40:42710.1016/j.matdes.2012.04.002 ↗
16. Song JM, Lin KL (2003) J Mater Res 18:206010.1557/JMR.2003.0290 ↗