The role of Harper–Dorn creep at high temperatures and very low stresses
Source abstract
Abstract
Creep experiments were conducted on single crystals of very high purity aluminum to evaluate the validity of the Harper–Dorn region of flow which occurs at very low stresses and high homologous temperatures. The results confirm the existence of a different flow process under these conditions but with a stress exponent closer to ∼3 rather than 1. Measurements show that the dislocation density within this low stress region varies with stress in a manner consistent with the behavior anticipated from an extrapolation of data reported in the regime of conventional power-law creep at high stresses. All of the experimental results are in reasonable agreement with earlier published data, including with the original data of Harper and Dorn when their results are plotted without incorporating a threshold stress.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and mechanical properties · High Temperature Alloys and Creep · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Bird JE, Mukherjee AK, Dorn JE (1969) In: Brandon DG, Rosen A (eds) Quantitative relation between properties and microstructure. Israel Universities Press, Jerusalem, Israel, p 255
2. Langdon TG (2002) Metall Mater Trans 33A:24910.1007/s11661-002-0087-4 ↗
3. Weertman J (1957) J Appl Phys 28:1185. doi: https://doi.org/10.1063/1.172260410.1063/1.1722604 ↗
4. Weertman J (1955) J Appl Phys 26:1213. doi: https://doi.org/10.1063/1.172187510.1063/1.1721875 ↗
5. Mohamed FA, Langdon TG (1974) Acta Metall 22:779. doi: https://doi.org/10.1016/0001-6160(74)90088-110.1016/0001-6160(74)90088-1 ↗
6. Yavari P, Langdon TG (1982) Acta Metall 30:2181. doi: https://doi.org/10.1016/0001-6160(82)90139-010.1016/0001-6160(82)90139-0 ↗
7. Cannon WR, Langdon TG (1983) J Mater Sci 18:1. doi: https://doi.org/10.1007/BF0054380810.1007/BF00543808 ↗
8. Cannon WR, Langdon TG (1988) J Mater Sci 23:1. doi: https://doi.org/10.1007/BF0117402810.1007/BF01174028 ↗
9. Nabarro FRN (1948) Report of a conference on strength of solids. The Physical Society, London, UK, p 75
10. Herring C (1950) J Appl Phys 21:437. doi: https://doi.org/10.1063/1.169968110.1063/1.1699681 ↗
11. Coble RL (1963) J Appl Phys 34:1679. doi: https://doi.org/10.1063/1.170265610.1063/1.1702656 ↗
12. Harper J, Dorn JE (1957) Acta Metall 5:654. doi: https://doi.org/10.1016/0001-6160(57)90112-810.1016/0001-6160(57)90112-8 ↗
13. Barrett CR, Muehleisen EC, Nix WD (1972) Mater Sci Eng 10:33. doi: https://doi.org/10.1016/0025-5416(72)90063-810.1016/0025-5416(72)90063-8 ↗
14. Mohamed FA, Murty KL, Morris JW (1973) Metall Trans 4:935. doi: https://doi.org/10.1007/BF0264559310.1007/BF02645593 ↗
15. Mohamed FA, Langdon TG (1974) Metall Trans 5:2339. doi: https://doi.org/10.1007/BF0264401410.1007/BF02644014 ↗
16. Kumar P, Kassner ME, Langdon TG (2007) J Mater Sci 42:409. doi: https://doi.org/10.1007/s10853-006-0782-410.1007/s10853-006-0782-4 ↗
17. Murty KL, Mohamed FA, Dorn JE (1972) Acta Metall 20:1009. doi: https://doi.org/10.1016/0001-6160(72)90135-610.1016/0001-6160(72)90135-6 ↗
18. Murty KL (1974) Mater Sci Eng 14:169. doi: https://doi.org/10.1016/0025-5416(74)90010-X10.1016/0025-5416(74)90010-X ↗
19. Mohamed FA (1978) Metall Trans 9A:1343
20. Yavari P, Mohamed FA, Langdon TG (1981) Acta Metall 29:1495. doi: https://doi.org/10.1016/0001-6160(81)90184-X10.1016/0001-6160(81)90184-X ↗
21. Yavari P, Miller DA, Langdon TG (1982) Acta Metall 30:871. doi: https://doi.org/10.1016/0001-6160(82)90085-210.1016/0001-6160(82)90085-2 ↗
22. Mohamed FA, Ginter TJ (1982) Acta Metall 30:1869. doi: https://doi.org/10.1016/0001-6160(82)90027-X10.1016/0001-6160(82)90027-X ↗
23. Lee S, Ardell AJ (1985) In: McQueen HJ, Bailon J-P, Dickson JI, Jonas JJ, Akben MG (eds) Strength of metals and alloys (ICSMA 7), vol 1. Pergamon Press, Oxford, UK, p 67110.1016/B978-0-08-031642-0.50118-5 ↗
24. Ginter TJ, Chaudhury PK, Mohamed FA (2001) Acta Mater 49:263. doi: https://doi.org/10.1016/S1359-6454(00)00316-510.1016/S1359-6454(00)00316-5 ↗
25. Ginter TJ, Mohamed FA (2002) Mater Sci Eng A322:148. doi: https://doi.org/10.1016/S0921-5093(01)01127-310.1016/S0921-5093(01)01127-3 ↗
26. Srivastava V, McNee KR, Jones H, Greenwood GW (2005) Mater Sci Tech 21:70110.1179/174328405X46105 ↗
27. Mohamed FA (2007) Mater Sci Eng A463:177. doi: https://doi.org/10.1016/j.msea.2006.06.14210.1016/j.msea.2006.06.142 ↗
28. Muehleisen EC, Barrett CR, Nix WD (1970) Scripta Metall 4:995. doi: https://doi.org/10.1016/0036-9748(70)90047-510.1016/0036-9748(70)90047-5 ↗
29. Burton B (1972) Phil Mag 25:645. doi: https://doi.org/10.1080/1478643720822889710.1080/14786437208228897 ↗
30. Blum W, Maier W (1999) Phys Stat Sol (a) 171:467. doi:10.1002/(SICI)1521-396X(199902)171:2<467::AID-PSSA467>3.0.CO;2-810.1002/(SICI)1521-396X(199902)171:2<467::AID-PSSA467>3.0.CO;2-8 ↗
31. McNee KR, Jones H, Greenwood GW (2001) In: Parker JD (ed) Creep and fracture of engineering materials and structures. The Institute of Materials, London, UK, p 185
32. Evans AG, Langdon TG (1976) Prog Mater Sci 21:171. doi: https://doi.org/10.1016/0079-6425(76)90006-210.1016/0079-6425(76)90001-3 ↗
33. Bailey JE, Hirsch PB (1960) Phil Mag 5:485. doi: https://doi.org/10.1080/1478643600823830010.1080/14786436008238300 ↗
34. Horiuchi R, Otsuka M (1972) Trans Japan Inst Metals 13:28410.2320/matertrans1960.13.284 ↗
35. Kumar P, Kassner ME, Blum W, Eisenlohr P, Langdon TG (2008) Mater Sci Eng (in press)
36. Kassner ME, McMahon ME (1987) Metall Trans 18A:83510.1007/BF02646925 ↗
37. Lin P, Lee SS, Ardell AJ (1986) Acta Metall 37:739. doi: https://doi.org/10.1016/0001-6160(89)90257-510.1016/0001-6160(89)90257-5 ↗
38. Blum W (1993) In: Cahn RW, Hassen P, Kramer EJ (eds) Plastic deformation and fracture. VCH Publishers, Weinheim, Germany, p 339
39. Straub S, Blum W (1990) Scripta Metall Mater 24:1837. doi: https://doi.org/10.1016/0956-716X(90)90036-G10.1016/0956-716X(90)90036-G ↗
40. Blum W, Eisenlohr P, Breutinger F (2002) Metall Mater Trans 33A:29110.1007/s11661-002-0090-9 ↗