Influence of roughness on the efficacy of grazing incidence X-ray diffraction to characterize grinding-induced phase changes in yttria-tetragonal zirconia polycrystals (Y-TZP)
Source abstract
Abstract
Zirconia-based dental prostheses undergo various grinding steps and heat treatments in preparation for dental patient use. Post-sintered grinding induces a tetragonal-to-monoclinic phase transformation that may lead to failure. These grinding conditions were simulated on fully sintered yttria-stabilized zirconia (Ivoclar IPS e.max ZirCAD, Ivoclar Vivadent, Schaan, Liechtenstein) using two applied loads (10 and 40 N) and different sizes of diamond grinding media (15-, 45-, and 70-μm particles). X-ray diffraction (XRD) and Raman spectroscopy were shown to be inadequate to analyze the monoclinic phase within the surface. Grazing incidence XRD correctly identified the presence of monoclinic phase on the ground zirconia surfaces. However, we conclude that, given the resulting ground microstructure, this technique only provides a qualitative measure for the depth profiles of the monoclinic phase for different grinding conditions. It was shown that regeneration of zirconia converts all monoclinic phase to the tetragonal phase, including conversion in specimens that were subjected to the harshest grinding conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dental materials and restorations · Dental Implant Techniques and Outcomes · Bone Tissue Engineering Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Gupta TK, Lange FF, Bechtold JH (1978) Effect of stress-induced phase transformation on the properties of polycrystalline zirconia containing metastable tetragonal phase. J Mater Sci 13:1464–1470. doi: 10.1007/BF0055320010.1007/BF00553200 ↗
2. Wang D, Guo Y, Liang K, Tao K (1999) Crystal structure of zirconia by Rietveld refinement. Sci China Ser A Math 42:80–8610.1007/BF02872053 ↗
3. Kelly JR, Denry I (2008) Stabilized zirconia as a structural ceramic: an overview. Dent Mater 24:289–298. doi: 10.1016/j.dental.2007.05.00510.1016/j.dental.2007.05.005 ↗
4. Eichler A (2001) Tetragonal Y-doped zirconia: structure and ion conductivity. Phys Rev B 64:1–8. doi: 10.1103/PhysRevB.64.17410310.1103/PhysRevB.64.174103 ↗
5. Lin J, Duh J (1997) The use of X-ray line profile analysis in the tetragonal to monoclinic phase transformation of ball milled, as-sintered and thermally aged zirconia powders. J Mater Sci 2:4901–490810.1023/A:1018668006162 ↗
6. Curtis AR, Wright AJ, Fleming GJP (2006) The influence of surface modification techniques on the performance of a Y-TZP dental ceramic. J Dent 34:195–206. doi: 10.1016/j.jdent.2005.06.00610.1016/j.jdent.2005.06.006 ↗
7. Zhao Y, Li W, Zhang M, Tao K (2002) A comparison of surface acidic features between tetragonal and monoclinic nanostructured zirconia. Catal Commun 3:239–245. doi: 10.1016/S1566-7367(02)00089-410.1016/S1566-7367(02)00089-4 ↗
8. Garvie RC, Swain MV (1985) Thermodynamics of the tetragonal to monoclinic phase transformation in constrained zirconia microcrystals. J Mater Sci 20:1193–1200. doi: 10.1007/BF0102631310.1007/BF01026313 ↗
9. Chevalier J, Gremillard L, Virkar AV, Clarke DR (2009) The tetragonal–monoclinic transformation in zirconia: lessons learned and future trends. J Am Ceram Soc 92:1901–1920. doi: 10.1111/j.1551-2916.2009.03278.x10.1111/j.1551-2916.2009.03278.x ↗
10. Denry I, Kelly JR (2008) State of the art of zirconia for dental applications. Dent Mater 24:299–307. doi: 10.1016/j.dental.2007.05.00710.1016/j.dental.2007.05.007 ↗
11. Hannink R, Kelly P, Muddle B (2000) Transformation toughening in zirconia containing ceramics. J Am Ceram Soc 83:461–48710.1111/j.1151-2916.2000.tb01221.x ↗
12. Garvie R, Hannink R, Pascoe R (1975) Ceramic steel? Nature 258:703–70410.1038/258703a0 ↗
13. Swain MV, Rose LRF (1986) Strength limitations of transformation-toughened zirconia alloys. J Am Ceram Soc 69:511–518. doi: 10.1111/j.1151-2916.1986.tb04785.x10.1111/j.1151-2916.1986.tb04785.x ↗
14. Scott HG (1975) Phase relationships in the zirconia–yttria system. J Mater Sci 10:1527–1535. doi: 10.1007/BF0103185310.1007/BF01031853 ↗
15. Ardlin BI (2002) Transformation-toughened zirconia for dental inlays, crowns and bridges: chemical stability and effect of low-temperature aging on flexural strength and surface structure. Dent Mater 18:590–59510.1016/S0109-5641(01)00095-1 ↗
16. Albakry M, Guazzato M, Vincent Swain M (2004) Effect of sandblasting, grinding, polishing and glazing on the flexural strength of two pressable all-ceramic dental materials. J Dent 32:91–99. doi: 10.1016/j.jdent.2003.08.00610.1016/j.jdent.2003.08.006 ↗
17. Kosmač T, Oblak Č, Marion L (2008) The effects of dental grinding and sandblasting on ageing and fatigue behavior of dental zirconia (Y-TZP) ceramics. J Eur Ceram Soc 28:1085–1090. doi: 10.1016/j.jeurceramsoc.2007.09.01310.1016/j.jeurceramsoc.2007.09.013 ↗
18. Kosmac T, Oblak C, Jevnikar P et al (1999) The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater 15:426–43310.1016/S0109-5641(99)00070-6 ↗
19. Kosmac T, Oblak C, Jevnikar P et al (2000) Strength and reliability of surface treated Y-TZP dental ceramics. J Biomed Mater Res 53:304–31310.1002/1097-4636(2000)53:4<304::AID-JBM4>3.0.CO;2-S ↗
20. Luthardt RG, Holzhuter M, Sandkuhl O et al (2002) Reliability and properties of ground Y-TZP-zirconia ceramics. J Dent Res 81:487–491. doi: 10.1177/15440591020810071110.1177/154405910208100711 ↗
21. Oilo M, Gjerdet NR, Tvinnereim HM (2008) The firing procedure influences properties of a zirconia core ceramic. Dent Mater 24:471–475. doi: 10.1016/j.dental.2007.04.00810.1016/j.dental.2007.04.008 ↗
22. Guazzato M, Quach L, Albakry M, Swain MV (2005) Influence of surface and heat treatments on the flexural strength of Y-TZP dental ceramic. J Dent 33:9–18. doi: 10.1016/j.jdent.2004.07.00110.1016/j.jdent.2004.07.001 ↗
23. Swain MV, Hannink RHJ (1989) Metastability of the martensitic transformation in a 12 mol% ceria-zirconia alloy: II, grinding studies. J Am Ceram Soc 72:1358–1364. doi: 10.1111/j.1151-2916.1989.tb07652.x10.1111/j.1151-2916.1989.tb07652.x ↗
24. Luthardt RG, Holzhüter MS, Rudolph H et al (2004) CAD/CAM-machining effects on Y-TZP zirconia. Dent Mater 20:655–662. doi: 10.1016/j.dental.2003.08.00710.1016/j.dental.2003.08.007 ↗
25. Zhang Y, Lawn BR, Rekow ED, Thompson VP (2004) Effect of sandblasting on the long-term performance of dental ceramics. J Biomed Mater Res 71:381–386. doi: 10.1002/jbm.b.3009710.1002/jbm.b.30097 ↗
26. Denry I (2013) How and when does fabrication damage adversely affect the clinical performance of ceramic restorations? Dent Mater 29:85–9610.1016/j.dental.2012.07.001 ↗
27. Marshall DB, Janes MR (1986) Reversible stress-induced martensitic transformation in ZrO2. J Am Ceram Soc 69:215–217. doi: 10.1111/j.1151-2916.1986.tb07410.x10.1111/j.1151-2916.1986.tb07410.x ↗
28. Wojdyr M (2010) Fityk: a general-purpose peak fitting program. J Appl Crystallogr 43:1126–1128. doi: 10.1107/S002188981003049910.1107/S0021889810030499 ↗
29. Li M, Feng Z, Xiong G et al (2001) Phase transformation in the surface region of zirconia detected by UV Raman spectroscopy. J Phys Chem B 105:8107–8111. doi: 10.1021/jp010526l10.1021/jp010526l ↗
30. Li M, Feng Z, Ying P et al (2003) Phase transformation in the surface region of zirconia and doped zirconia detected by UV Raman spectroscopy. Phys Chem Chem Phys 5:5326. doi: 10.1039/b310284j10.1039/b310284j ↗
31. Argyriou DN, Howard CJ (1995) Re-investigation of yttria–tetragonal zirconia polycrystal (Y-TZP) by neutron powder diffraction: a cautionary tale. J Appl Crystallogr 28:206–208. doi: 10.1107/S002188989401101510.1107/S0021889894011015 ↗
32. Bondars B, Heidemane G, Grabis J (1995) Powder diffraction investigations of plasma sprayed zirconia. J Mater Sci 30:1621–1625. doi: 10.1007/BF0037527510.1007/BF00375275 ↗
33. Simeone D, Gosset D, Bechade JL, Chevarier a (2002) Analysis of the monoclinic–tetragonal phase transition of zirconia under irradiation. J Nucl Mater 300:27–38. doi: 10.1016/S0022-3115(01)00701-210.1016/S0022-3115(01)00701-2 ↗
34. Denry IL, Holloway JA (2006) Microstructural and crystallographic surface changes after grinding zirconia-based dental ceramics. J Biomed Mater Res 76B:440–448. doi: 10.1002/jbm.b.3038210.1002/jbm.b.30382 ↗
35. Ho C-J, Liu H-C, Tuan W-H (2009) Effect of abrasive grinding on the strength of Y-TZP. J Eur Ceram Soc 29:2665–266910.1016/j.jeurceramsoc.2009.02.011 ↗
36. Kao HC, Ho FY, Yang CC, Wei WJ (2000) Surface machining of fine-grain Y-TZP. J Eur Ceram Soc 20:2447–245510.1016/S0955-2219(00)00114-X ↗
37. Azad A-M (2006) Fabrication of yttria-stabilized zirconia nanofibers by electrospinning. Mater Lett 60:67–72. doi: 10.1016/j.matlet.2005.07.08510.1016/j.matlet.2005.07.085 ↗
38. Li C, Li M (2002) UV Raman spectroscopic study on the phase transformation of ZrO2, Y2O3–ZrO2 and (SO4)2/ZrO2. J Raman Spectrosc 33:301–308. doi: 10.1002/jrs.86310.1002/jrs.863 ↗
39. Kim B-K, Hahn J-W, Han KR (1997) Quantitative phase analysis in tetragonal-rich tetragonal/monoclinic two phase zirconia by Raman spectroscopy. J Mater Sci Lett 16:669–671. doi: 10.1023/A:101858782126010.1023/A:1018587821260 ↗
40. Valdez J a, Tang M, Chi Z et al (2004) Characterization of an ion irradiation induced phase transformation in monoclinic zirconia. Nucl Instrum Methods Phys Res 218:103–110. doi: 10.1016/j.nimb.2004.02.00110.1016/j.nimb.2004.02.001 ↗
41. Simeone D, Bechade JL, Gosset D et al (2000) Investigation on the zirconia phase transition under irradiation. J Nucl Mater 281:171–181. doi: 10.1016/S0022-3115(00)00183-510.1016/S0022-3115(00)00183-5 ↗
42. Simeone D, Baldinozzi G, Gosset D et al (2012) Grazing incidence X-ray diffraction for the study of polycrystalline layers. Thin Solid Films. doi: 10.1016/j.tsf.2012.07.06810.1016/j.tsf.2012.07.068 ↗
43. Gremillard L, Grandjean S, Chevalier J (2010) A new method to measure monoclinic depth profile in zirconia-based ceramics from X-ray diffraction data. Int J Mater Res 101:88–9410.3139/146.110251 ↗
44. Cattani-Lorente M, Scherrer SS, Ammann P et al (2011) Low temperature degradation of a Y-TZP dental ceramic. Acta Biomater 7:858–865. doi: 10.1016/j.actbio.2010.09.02010.1016/j.actbio.2010.09.020 ↗
45. Chevalier J, Gremillard L, Deville S (2007) Low-temperature degradation of zirconia and implications for biomedical implants. Annu Rev Mater Res 37:1–32. doi: 10.1146/annurev.matsci.37.052506.08425010.1146/annurev.matsci.37.052506.084250 ↗
46. Muñoz-Tabares JA, Jiménez-Piqué E, Reyes-Gasga J, Anglada M (2011) Microstructural changes in ground 3Y-TZP and their effect on mechanical properties. Acta Mater 59:6670–668310.1016/j.actamat.2011.07.024 ↗
47. Stepanov S, Kondrashkina E, Schmidbauer M et al (1996) Diffuse scattering from interface roughness in grazing-incidence X-ray diffraction. Phys Rev B 54:8150–816210.1103/PhysRevB.54.8150 ↗
48. Garvie RC, Nicholson PS (1972) Phase analysis in zirconia systems. J Am Ceram Soc 55:303–305. doi: 10.1111/j.1151-2916.1972.tb11290.x10.1111/j.1151-2916.1972.tb11290.x ↗
49. Toraya H, Yoshimura M, Somiya S (1984) Calibration curve for quantitative analysis of the monoclinic–tetragonal ZrO2 system by X-ray diffraction. J Am Ceram Soc 67:C-119–C-121. doi: 10.1111/j.1151-2916.1984.tb19715.x10.1111/j.1151-2916.1984.tb19715.x ↗
50. Valdez J a, Chi Z, Sickafus KE (2008) Light ion irradiation-induced phase transformation in the monoclinic polymorph of zirconia. J Nucl Mater 381:259–266. doi: 10.1016/j.jnucmat.2008.07.04510.1016/j.jnucmat.2008.07.045 ↗
51. Muñoz-Tabares JA, Jiménez-Piqué E, Reyes-Gasga J, Anglada M (2012) Microstructural changes in 3Y-TZP induced by scratching and indentation. J Eur Ceram Soc 32:3919–392710.1016/j.jeurceramsoc.2012.02.026 ↗
52. Mochales C, Maerten A, Rack A et al (2011) Monoclinic phase transformations of zirconia-based dental prostheses, induced by clinically practised surface manipulations. Acta Biomater 7:2994–300210.1016/j.actbio.2011.04.007 ↗
53. Chevalier J, Cales B, Drouin J (1999) Low-temperature aging of Y-TZP ceramics. J Am Ceram Soc 54:2150–215410.1111/j.1151-2916.1999.tb02055.x ↗
54. Kim D-J (1997) Influence of aging environment on low-temperature degradation of tetragonal zirconia alloys. J Eur Ceram Soc 17:897–903. doi: 10.1016/S0955-2219(96)00205-110.1016/S0955-2219(96)00205-1 ↗
55. Deville S, Chevalier J, Gremillard L (2006) Influence of surface finish and residual stresses on the ageing sensitivity of biomedical grade zirconia. Biomaterials 27:2186–2192. doi: 10.1016/j.biomaterials.2005.11.02110.1016/j.biomaterials.2005.11.021 ↗
56. Whalen PJ, Reidinger F, Antrim RF (1989) Prevention of low-temperature surface transformation by surface recrystallization in yttria-doped tetragonal zirconia. J Am Ceram Soc 72:319–321. doi: 10.1111/j.1151-2916.1989.tb06124.x10.1111/j.1151-2916.1989.tb06124.x ↗