journal article·2004-06

Use of polymer-based sensors for monitoring the static and dynamic response of a cantilever composite beam

K. S. C. Kuang, S. T. Quek, W. J. Cantwell

Journal of Materials Science· Volume 39· Issue 11
Publisher page

Abstract

Engineering polymeric materials offer a number of important advantages such as lightweight, immunity to electromagnetic interference, good chemical resistance, durability, low cost and ease of processing. In view of these benefits, polymer materials are being used in a wide spectrum of industries including aerospace, construction, electronics, transportation, packaging, fibre optics and sensor sectors. Indeed, the special properties exhibited by polymers are increasingly being exploited to provide highly competitive alternatives to conventional products and devices, such as plastic optical fibers and polymer-based transducers. In recent years, plastic optical fibre sensors and piezoelectric film, in particular, have been attracting considerable attention from the scientific community in view of their potential as sensing devices to monitor a variety of environmental parameters [1–5]. Polymeric materials which exhibit excellent optical properties such as polymethyl methacrylate (PMMA) are being used to produce plastic optical fibers (POF) for short distance data transmission, lighting, advertising and sensing applications. Diameter sizes of 0.25 to 3 mm are available, offering typical transmission losses in the region of 150 dB/km at 650 nm. Indeed, recent research using POFs has shown their potential as versatile and highly cost-effective passive sensors for structural health-monitoring [6, 7]. Their strain, vertical displacement and dynamic monitoring capability make them ideal sensors for mechanical systems. Compared to their glass-based counterparts, POFs offer simplicity in handling, ease of termination and are capable of high optical power delivery at a much lower cost (typically US$0.13/meter). In addition, POFs also exhibit a higher fracture toughness and flexibility than other comparable systems, making them much less susceptible to damage and fracture when operating in harsh engineering environments. Polyvinylidine fluoride (PVDF) and its co-polymers, have been found to be very effective piezoelectric transducer materials converting mechanical stresses to electrical energy in the form of an electrical charge [8, 9]. Piezo film sensors are usually supplied in the form of a thin-film, typically ranging from 9 to 110 μm in thick-
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Analysis and Optimization · Aeroelasticity and Vibration Control · Composite Structure Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Y. M. Wong, K. S. C. Kuang, P. J. Scully, R. Bartlett and W. J. Cantwell, Strain: Int. J. Strain Meas. 9 (2003) 115.10.1046/j.1475-1305.2003.00069.x ↗
2. N. Takeda, T. Kosaka and T. Ichiyama, P. Soc. Photo-Opt. Inst. 3670 (1999) 248.
3. F. Bauer, IEEE T. Ultrason. Ferr. 47 (2000) 1448.10.1109/58.883534 ↗
4. S. C. Galea, W. K. Chiu and J. J. Paul, J. Intell. Mater. Syst. Str. 4 (1993) 330.10.1177/1045389X9300400305 ↗
5. L. Yin, X. M. Wang and Y. P. Shen, Comput. Struct. 59 (1995) 623.10.1016/0045-7949(95)00290-1 ↗
6. K. S. C. Kuang, Akmaluddin, W. J. Cantwell and C. Thomas, Meas. Sci. Technol. 14 (2003) 205.10.1088/0957-0233/14/2/308 ↗
7. K. S. C. Kuang and W. J. Cantwell, ibid. 14 (2003) 1305.10.1088/0957-0233/14/8/316 ↗
8. H. Kawai, Jpn. J. Appl. Phys. 8 (1969) 975.10.1143/JJAP.8.975 ↗
9. E. Fukuda, IEEE T. Ultrason. Ferr. 47 (2000) 1277.10.1109/58.883516 ↗
10. Q. X. Chen and P. A. Payne, Meas. Sci. Technol. 6 (1995) 249.10.1088/0957-0233/6/3/001 ↗
11. B. Samanta, M. C. Ray and R. Bhattacharyya, AIAA J. 34 (1996) 1885.10.2514/3.13322 ↗