Effect of textural characteristics of supported metallocenes on ethylene polymerization
Source abstract
Abstract
Catalyst particle size is an important parameter in the polymer industry. A series of supports with different textural properties (silicas prepared by different routes), surface sites (alumino-silicate, silica-zirconia, magnesia-silica supports, and methylaluminoxane-modified silica) and crystallinity (amorphous, lamellar, and crystalline materials) were investigated in the sequential grafting reaction of two metallocene catalysts, Cp2ZrCl2 and (n-BuCp)2ZrCl2, in a 1:3 ratio. The catalyst systems were analyzed by Rutherford backscattering spectrometry, atomic force microscopy, small angle X-ray scattering, extended X-ray absorption fine structure spectroscopy, and nitrogen adsorption. All of the systems were shown to actively polymerize ethylene when methylaluminoxane was used as the cocatalyst. Experimental results are discussed in terms of the relationships between the radius of gyration of secondary particles and catalyst activity. A radius of gyration in the range of 8–9 nm was shown to be associated with higher catalyst activity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organometallic Complex Synthesis and Catalysis · Catalysis and Oxidation Reactions · Catalytic Processes in Materials Science
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. Merkus HG (2009) Particle size measurements: fundamentals. Practice, Quality, Springer
2. Rodella CB, Kellermann G, Francisco MSP, Jordão MH, Zanchet D (2008) Ind Eng Chem Res 47:861210.1021/ie800543t ↗
3. Yanwei Z, Yubao Z (2002) J Colloid Interface Sci 247:10010.1006/jcis.2001.8127 ↗
4. Bertin V, Bosch P, Del Angel G, Gomez R, Barbier J, Marecot P (1995) J Chim Phys et Phys Chim Biolog 92:12010.1051/jcp/1995920120 ↗
5. Yu CF, Koh S, Leisch JE, Toney MF, Strasser P (2009) Faraday Disc 140:28310.1039/B801586D ↗
6. Paredes JI, Martínez-Alonso A, Tascón JMD (2003) Micropor Mesopor Mater 65:9310.1016/j.micromeso.2003.07.001 ↗
7. Occelli ML, Gould SAC (2004) Fluid catalytic cracking VI: preparation and characterization of catalysts, vol 149. Elsevier, Amsterdam, p 71
8. Lee KH, Catani R, Miglio R, Wolf EE (1997) Catal Deact 111:463
9. Andoni A, Chadwick JC, Niemantsverdriet HJW, Thüne PC (2008) J Catal 257:8110.1016/j.jcat.2008.04.020 ↗
10. Chum PS, Swogger KW (2008) Prog Polym Sci 33:79710.1016/j.progpolymsci.2008.05.003 ↗
11. Severn JR, Chadwick JC, Duchateau R, Friederichs N (2005) Chem Rev 103:407310.1021/cr040670d ↗
12. Silveira F, Pires GP, Petry CF, Pozebon D, Stedile FC, Dos Santos JHZ, Rigacci A (2007) J Mol Catal A Chem 265:16710.1016/j.molcata.2006.10.008 ↗
13. Silveira F, Alves MCM, Stedile FC, Pergher SB, Rigacci A, Dos Santos JHZ (2009) J Mol Catal A Chem 298:4010.1016/j.molcata.2008.10.011 ↗
14. Silveira F, Petry CF, Pozebon D, Pergher SB, Detoni C, Stedile FC, Dos Santos JHZ (2007) Appl Catal A Gen 333:9610.1016/j.apcata.2007.09.010 ↗
15. Kim JM, Kwak LH, Jun S, Ryoo R (1995) J Phys Chem 99:1674210.1021/j100045a039 ↗
16. Pergher SBC, Corma A, Fornés V (2003) Quim Nov 26:79510.1590/S0100-40422003000600003 ↗
17. Corma A, Fornés V, Pergher SB, Maessen TLM, Buglass JG (1998) Nature 396:35310.1038/24592 ↗
18. Fonseca MG, Oliveira AS, Airoldi C (2001) J Colloid Interface Sci 240:53310.1006/jcis.2001.7663 ↗
19. Stedile FC, Dos Santos JHZ (1999) Phys Stat Sol 173:12310.1002/(SICI)1521-396X(199905)173:1<123::AID-PSSA123>3.0.CO;2-B ↗
20. Ressler T (1998) J Synch Rad 5:11810.1107/S0909049597019298 ↗
21. Rehr JJ, Albers RC (2000) Rev Mod Phys 72:62110.1103/RevModPhys.72.621 ↗
22. Brinker CJ (2006) In: Bergna HE, Roberts WO (eds) Colloidal silica: fundamentals and applications. CRC press, Boca Raton, p 615
23. Zeleňák V, Badaničová M, Halamová D, Čejka J, Zukal A, Murafa N, Goerigk G (2008) Chem Eng J 144:33610.1016/j.cej.2008.07.025 ↗
24. Harrison D, Couter IM, Wang S, Nistala S, Kuntz BA, Pingeon M, Tian J, Collins S (1998) J Mol Catal A Chem 128:6510.1016/S1381-1169(97)00163-5 ↗