journal article·2014-09

Enhanced thermomechanical properties of long and short glass fiber-reinforced polyamide 6,6/polypropylene mixtures by tuning the processing procedures

Namil Kim, Dae-Yoon Kim, Young-Jin Kim, Kwang-Un Jeong

Journal of Materials Science· Volume 49· Issue 18
Publisher page

Abstract

Long and short glass fibers (GF) were incorporated into the polyamide 6,6 (PA66)/polypropylene (PP) mixtures in order to enhance the thermomechanical properties. The effect of fiber length and processing procedures on tensile strength, flexural modulus, impact strength, and heat deflection temperature has been investigated. Miscibility behavior of the PA66/PP mixtures has been examined by performing differential scanning calorimetry analysis and theoretical calculation. The mixtures exhibiting broad coexistent regions such as crystal + crystal (Cr1 + Cr2), crystal + liquid (Cr1 + L2), and liquid + crystal (L1 + Cr2) revealed a significant improvement in thermal and mechanical properties by the addition of GF. Especially, long fiber-reinforced thermoplastics showed better performances compared to short fiber-reinforced thermoplastics at the same filler loading. From the morphological observation of the fractured surface, it was realized that the incorporation of long GF after the melt blending of PA66 and PP was very effective to attain high thermomechanical properties due to the better homogeneity and compatibility.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer crystallization and properties · Polymer Nanocomposites and Properties · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. González-Montiel A, Keskkula H, Paul DR (1995) Impact-modified nylon 6/polypropylene blends: 1. morphology-property relationships. Polymer 36:4587–460310.1016/0032-3861(95)96828-V ↗
2. Sacchi A, Di Landro L, Pegoraro M, Severini F (2004) Morphology of isotactic polypropylene–polyamide 66 blends and their mechanical properties. Eur Polym J 40:1705–171310.1016/j.eurpolymj.2004.03.025 ↗
3. Van Gheluwe P, Favis BD, Chalifoux JP (1988) Morphological and mechanical properties of extruded polypropylene/nylon-6 blends. J Mater Sci 23:3910–3920. doi: 10.1007/BF0110681310.1007/BF01106813 ↗
4. Xiaomin Z, Gang L, Dongmei W, Zhihui Y, Jinghua Y, Jingshu L (1998) Morphological studies of polyamide 1010/polypropylene blends. Polymer 39:15–2210.1016/S0032-3861(97)00251-6 ↗
5. Ohlsson B, Hassander H, Törnell B (1998) Improved compatibility between polyamide and polypropylene by the use of maleic anhydride grafted SEBS. Polymer 39:6705–671410.1016/S0032-3861(97)10290-7 ↗
6. Majumdar B, Paul DR, Oshinski AJ (1997) Evolution of morphology in compatibilized vs uncompatibilized polyamide blends. Polymer 38:1787–180810.1016/S0032-3861(96)00702-1 ↗
7. Menyhárd A, Varga J (2006) Effect of compatibilizers on the crystallization, melting and polymorphic composition of β-nucleated isotactic polypropylene and polyamide 6 blends. Eur Polym J 42:3257–326810.1016/j.eurpolymj.2006.09.003 ↗
8. Guo R, Li J, Yan LT, Xie XM (2013) Role of compatibilizer in multicomponent polymer mixtures under shear flow. Soft Matter 9:255–26010.1039/C2SM26342D ↗
9. Zhu J, He Q, Luo Z, Khasanov A, Li Y, Sun L, Wang Q, Wei S, Guo Z (2012) Property manipulated polypropylene–iron nanocomposites with maleic anhydride polypropylene. J Mater Chem 22:15928–1593810.1039/c2jm32371k ↗
10. Spencer MW, Cui L, Yoo Y, Paul DR (2010) Morphology and properties of nanocomposites based on HDPE/HDPE-g-MA blends. Polymer 51:1056–107010.1016/j.polymer.2009.12.047 ↗
11. Inoue Y, Matsugi T, Kashiwa N, Matyjaszewski K (2004) Graft copolymers from linear polyethylene via atom transfer radical polymerization. Macromolecules 37:3651–365810.1021/ma0359887 ↗
12. Utsel S, Bruce C, Pettersson T, Fogelstrom L, Carlmark A, Malmstrom E, Wagberg L (2012) Physical tuning of cellulose-polymer interactions utilizing cationic block copolymers based on PCL and quaternized PDMAEMA. ACS Appl Mater Interfaces 4:6796–680710.1021/am301981r ↗
13. Hsiao MC, Laio SH, Lin YF, Weng CC, Tsai HM, Ma CCM, Lee SH, Yen MY, Liu PI (2011) Polypropylene-grafted multi-walled carbon nanotube reinforced polypropylene composite bipolar plates in polymer electrolyte membrane fuel cells. Energy Environ Sci 4:543–55010.1039/C0EE00057D ↗
14. Kim KT, Jo WH (2009) Synthesis of poly(3-hexylthiophene)-graft-poly(t-butyl acrylate-co-acrylic acid) and its role of compatibilizer for enhancement of mechanical and electrical properties of nylon 66/multi-walled carbon nanotube composites. Comput Sci Technol 69:2205–221110.1016/j.compscitech.2009.06.013 ↗
15. Hambir R, Bulakh N, Jog JP (2002) Polypropylene/clay nanocomposites: effect of compatibilizer on the thermal, crystallization and dynamic mechanical behavior. Polym Eng Sci 42:1800–180710.1002/pen.11072 ↗
16. García-López D, Picazo O, Merino JC, Pastor JM (2003) Polypropylene–clay nanocomposites: effect of compatibilizing agents on clay dispersion. Eur Polym J 39:945–95010.1016/S0014-3057(02)00333-6 ↗
17. Harmia T, Friedrich K (1995) Fracture toughness and failure mechanisms in unreinforced and long-glass-fibre-reinforced PA66/PP blends. Compos Sci Technol 53:423–43010.1016/0266-3538(95)00031-3 ↗
18. Thomason JL (2009) The influence of fibre length, diameter and concentration on the impact performance of long glass-fibre reinforced polyamide 6,6. Compos Part A 40:114–12410.1016/j.compositesa.2008.10.013 ↗
19. Thomason JL (2002) The influence of fibre length and concentration on the properties of glass fibre reinforced polypropylene: 5. Injection moulded long and short fibre PP. Compos Part A 33:1641–165210.1016/S1359-835X(02)00179-3 ↗
20. Thomasset J, Carreau PJ, Sanschagrin B, Ausias G (2005) Rheological properties of long glass fiber filled polypropylene. J Non Newtonian Fluid Mech 125:25–3410.1016/j.jnnfm.2004.09.004 ↗
21. Flory PJ (1942) Thermodynamics of high polymer solutions. J Chem Phys 10:51–6110.1063/1.1723621 ↗
22. Huggins ML (1942) Theory of solutions of high polymers. J Am Chem Soc 64:1712–171910.1021/ja01259a068 ↗
23. Kobayashi R (1993) Modeling and numerical simulations of dendritic crystal growth. Physica D 63:410–42310.1016/0167-2789(93)90120-P ↗
24. Matkar RA, Kyu T (2006) Phase diagrams of binary crystalline–crystalline polymer blends. J Phys Chem B 110:16059–1606510.1021/jp062124p ↗
25. Matkar RA, Kyu T (2006) Role of crystal–amorphous interaction in phase equilibria of crystal–amorphous polymer blends. J Phys Chem B 110:12728–1273210.1021/jp061159m ↗
26. Koningsveld R, Stockmayer WH, Nies E (2001) Polymer phase diagram a textbook. Oxford University, New York, pp 3–4410.1093/oso/9780198556350.003.0001 ↗
27. Thomason JL, Vlug MA (1997) Influence of fibre length and concentration on the properties of glass fibre-reinforced polypropylene: 4. Impact properties. Compos Part A 28A:277–28810.1016/S1359-835X(96)00127-3 ↗