journal article·2005-06

Dynamic mechanical analysis of electron beam irradiated sulphur vulcanized nitrile rubber network—some unique features

V. Vijayabaskar, A. K. Bhowmick

Journal of Materials Science· Volume 40· Issue 11
Publisher page

Abstract

Mixed crosslinking system with electron beam irradiation as one of the crosslinkers in rubber has been developed for the first time. This paper describes some unique features of dynamic mechanical properties of the electron beam irradiated nitrile rubber vulcanizates at varying levels of sulphur in the network. Dynamic mechanical thermal analysis (DMTA) was performed on these vulcanizates over a range of temperatures (−80°C to +80°C), frequencies (0.032 to 32 Hz) and strains (0.001 to 10%). The results showed that there were significant changes in tan delta peak temperature and storage modulus on irradiation of these vulcanizates. The vulcanizates containing higher amount of sulphur formed intense crosslinked networks and crosslink rearrangements, which were supported by the increase in the storage modulus and shift in tan delta towards higher temperature as compared to their control counterpart. There is also an increase in the peak height due to chain scission and subsequent plasticization. A concept of network distribution using the plots of the storage modulus ratio divided by frequency against inverse of frequency was introduced. This contravening nature was also affirmed with the help of these curves showing broader network distribution for irradiated samples having lower amount of sulphur. This was also supported from the crossover frequency values estimated from the plot of storage and loss modulii against frequencies observed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer crystallization and properties · Epoxy Resin Curing Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. I. BANIK, T. K. CHAKI, V. K. TIKKU and A. K. BHOWMICK, Angew. Makromol. Chem. 263 (1999) 5.10.1002/(SICI)1522-9505(19981215)263:1<5::AID-APMC5>3.0.CO;2-L ↗
2. H. P. BROWN, Rubber Chem. Technol. 36 (1963) 931.10.5254/1.3539642 ↗
3. N. D. ZAKHAROV and T. A. SHADRICHEVA, Rubber Chem. Technol. 36 (1961) 575.10.5254/1.3539589 ↗
4. A. K. BHOWMICK and S. K. DE, Rubber Chem. Technol. 53 (1980) 107.10.5254/1.3535020 ↗
5. N. D. ZAKHAROV and I. N. BEREZKIN, Kauch. Rezina. 20 (1961) 7.
6. R. A. ZINGARO and W. C. COOPER (Selenium, Van Nostrand Reinhold, New York, 1974) P. 728.
7. G. B. ABDULLAEV, T. K. ISMAILOV, S. A. ABASOV, G. G. AKHMEDEV, S. I. MAKHTIEVA, K. R. AKHMEDOV and T. A. PASHAEV, Chem. Abstr. 86 (1977) 19101u.
8. V. P.KVARDASHOV and A. E.KORNEV, Khim. Khim. Technol. 14(11) (1971) 1757.
9. Y. MINORA, S. YAMASHITA, H. OKARNATO, N. MATSUO, M. IRAWA and S. I. KOTTMOTO, Rubber Chem. Technol. 52 (1979) 926.
10. V. VIJAYABASKAR, FRANCIS RENE COSTA and ANIL K. BHOWMICK. Rubber Chem. Technol. 77 (2004) 624.10.5254/1.3547841 ↗
11. V. VIJAYABASKAR, RAKESH GUPTA, P. P.CHAKRABARTI and ANIL K. BHOWMICK, J. Appl. Polym. Sci. 2004 (Communicated).
12. L. E.NIELSON, “Mechanical Properties of Polymers and Composites” (Marcel Dekker, New York, 1974).
13. N. G. MCCRUM, B. E.READ and G. WILLIAMS, “An elastic and Dielectric Effects in Polymer Solids” (Wiley, London, 1967).
14. J. D.FERRY, “Viscoelastic Properties of Polymers” (Wiley, New York, 1970).
15. V. D. MCGININSE, in “Crosslinking with Radiation Encyclopedia of Polymer Science and Engineering,” edited by J. I.Kroschwitz (John Wiley and Sons 4, 1986) p. 418.
16. T. MURAYAMA, in “Dynamic Mechanical Properties, Encyclopedia of Polymer Science and Engineering,” edited by J. I. Kroschwitz (John Wiley and Sons 5, 1986) p. 299.
17. R. K.TRAEGER and T. G.CASTONGUAY, J. Appl. Polym. Sci. 10 (1996) 491.10.1002/app.1966.070100313 ↗
18. T. K.CHAKI, D. ROY, A. B. MAJALI and A. K. BHOWMICK, J. Polym. Eng. 13 (1994) 17.10.1515/POLYENG.1994.13.1.17 ↗
19. K. P. S. KWEI and T. K. KWEI, J. Appl. Polym. Sci. 12 (1968) 1553.
20. S. K.DATTA, T. K. CHAKI, D. KHASTGIR and A. K.BHOWMICK, Polym. and Polym. Comp. 4 (1996) 419.
21. I. BANIK and A. K.BHOWMICK, J. Appl. Polym. Sci. 69 (1998) 2079.10.1002/(SICI)1097-4628(19980906)69:10<2079::AID-APP19>3.0.CO;2-X ↗
22. P. THAVAMANI and A. K.BHOWMICK, J. Mat. Sci. 27 (1992) 32439.10.1007/BF01116020 ↗
23. A. CHARLESBY and S. H. PINNER, Proc. Roy. Soc (London) A249 (1959) 367.10.1098/rspa.1959.0030 ↗
24. W. H. TUMINELLO, Polym. Eng. Sci. 26 (1986) 1339.10.1002/pen.760261909 ↗
25. S. WU, Polym. Eng. Sci. 25 (1985) 122.10.1002/pen.760250211 ↗
26. G. R. ZEICHNER and C. W. MACOSKO, “On-line Viscoelastic Measurements for Polymer Melt Processes” (SPEANTEC Tech.Conf., SanFrancisco, May, 1982).
27. T. MASUDA. K. KITAGAWA. T. LNOUE and S. ONOGI, Macromolecules 3 (1970) 116.10.1021/ma60014a002 ↗
28. W. W. GRAESSLEY, “Viscoelasticity and Flow in Polymer Melts and Concentrated Solutions,” in “Physical Properties of Polymers.” edited by J. E. Mark (ACS, Washington, DC, 1984): Faraday Symp. Chem. Soc. 18 (1983) 7.10.1039/fs9831800007 ↗
29. T. LIU, D. S. SOONG and M. C. WILLIAMS, J. Rheology 27 (1983) 7.10.1122/1.549696 ↗
30. R. RAHALKAR and HENRY TANG, Rubber Chem. Technol. 61(5) (1988) 812.10.5254/1.3536220 ↗