journal article·2004-08Open access

Mechanochemical effects on the kinetics of zinc titanate formation

P. M. Botta, E. F. Aglietti, J. M. Porto López

Journal of Materials Science· Volume 39· Issue 16-17

Abstract

In this work, mixtures Zn-TiO 2 (anatase) in molar ratio 1:1 were mechanochemically activated in air atmosphere, and submitted to thermal treatments in order to study its thermal transformations. The behavior of the system during the milling was followed by X-ray diffraction (XRD), differential thermal analyses (DTA) and thermogravimetric analyses (TGA). Mechanochemical activation produces a progressive loss in crystallinity of the starting powders, with simultaneous oxidation of metallic Zn. However, the formation of neither ZnTiO 3 nor Zn 2 TiO 4 could be detected. At temperatures above 600 C, the thermal treatments resulted in the formation of ZnTiO 3 and Zn 2 TiO 4 , at lower temperatures and shorter holding times for samples activated during longer times. The non-activated mixture exhibited a very different behavior, yielding Zn 2 Ti 3 O 8 and Zn 2 TiO 4 without evidence of ZnTiO 3 formation. The obtained results are explained on the basis of reaction mechanisms taking place in the activated and non-activated samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. K. Tkácová, "Mechanical Activation of Minerals" (Elsevier Science, Amsterdam, 1989) p. 32.
2. C. Suryanarayana, E. Ivanov and V. V. Boldyrev, Mater. Sci. Eng. A 304–306(2001) 151.10.1016/S0921-5093(00)01465-9 ↗
3. I. J. Lin and S. Nadiv, Mater. Sci. Eng. 39(1979) 193.10.1016/0025-5416(79)90059-4 ↗
4. J. Morales and J. L. Tirado, Thermochim. Acta 110(1987) 319.10.1016/0040-6031(87)88240-0 ↗
5. L. Takacs, Progr. Mater. Sci. 47(2002) 355.10.1016/S0079-6425(01)00002-0 ↗
6. P. Millet and T. Hwang, J. Mater. Sci. 31(1996) 351.10.1007/BF01139151 ↗
7. H. T. Kim, J. D. Byun and Y. Kim, Mater. Res. Bull. 33(1998) 963.10.1016/S0025-5408(98)00056-7 ↗
8. H. T. Kim, S. H. Kim, J. D. Byun and Y. Kim, J. Amer. Ceram. Soc. 82(1999) 3043.10.1111/j.1151-2916.1999.tb02200.x ↗
9. F. H. Dulin and D. E. Rase, ibid. 43(1960) 125.10.1111/j.1151-2916.1960.tb14326.x ↗
10. B. D. Cullity, "Elements of X-ray Diffraction," 2nd ed. (Addison-Wesley, Reading, 1978) p. 409.
11. P. M. Botta, P. G. Bercoff, E. F. Aglietti, H. R. Bertorello and J. M. Porto L ópez, Mater. Sci. Eng. A 360(2003) 146.10.1016/S0921-5093(03)00412-X ↗
12. O. Yamaguchi, M. Morimi, H. Kawabata and K. Shimizu, J. Amer. Ceram. Soc. 70(1987) C-97.
13. A. Beauger, J. C. Mutin and J. C. Niepce, J. Mater. Sci. 18(1983) 3543.10.1007/BF00540726 ↗
14. Idem.,ibid . 19(1984)195.10.1007/BF02403126 ↗