Poly(dimethylsiloxane)-polyimide blends in the formation of thick polyimide films
Source abstract
Abstract
Thick polyimide layers can be formed by using some unique properties of poly(dimethylsiloxane)-polyimide (PDMS/PMDA–ODA) blends followed by surface modification and deposition of a second layer of polyimide precursor chemicals. The method is based on the micro-phase separation characteristics of these blends to yield surfaces that have PDMS-like character. Upon modification with UV/ozone treatment, a surface that is essentially SiOxand hydrophilic in nature is produced. This surface is amenable to reaction and deposition of a second polyimide layer from polyimide precursors. The thicker polyimide layer has enhanced adhesion between the original layer of the blend and the new polyimide layer and this approach finds extensive applications for products that require thick polymer layers. Changes in surface energy for various blend compositions were monitored by measurement of advancing contact angle with de-ionized water. Contact angle for unmodified polyimide films was on the order of 70° and it increased to about 104° after blending with PDMS and curing. UV/ozone treatment reduced the contact angle of the doped polyimide to less than 5°. X-ray photoelectron spectroscopy (XPS) and angle resolved XPS (ARXPS) measurements were used to monitor the chemical compositions of the various surfaces. High-resolution XPS spectra in the Si2p region confirm the transformation of O–Si–C bonds in PDMS to SiOx, where x is about 2. Scanning electron microscopy (SEM) of some selected samples shows that the blends contain phase separation of the polymers at the surfaces of the samples. Atomic force microscopy (AFM) of siloxane-free polyimide, and PDMS/PMDA–ODA blends both prior to and after UV/ozone exposure, show that the films are essentially flat at short treatment times (less than 60 min). AFM also reveals the separation of PDMS into micro-domains at the cured film surface and throughout the layer below the surface of the blended films. Adhesion of a subsequently deposited polyimide layer to the modified polyimide surface was found to be greatly improved when compared to the adhesion obtained for deposition onto a pristine polyimide surface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Synthesis and properties of polymers · Silicone and Siloxane Chemistry · Surface Modification and Superhydrophobicity
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Egitto FD, Matienzo LJ (1996) In: Ghosh MK, Mittal KL (eds) Polyimides: fundamentals and applications, Marcel Dekker, New York, p 389 and references therein
2. Schmitt GP, Appelt BK, Gotro JT (1989) In: Seraphim DP, Lasky RC, Li C-Y (eds) Principles of electronic packaging, McGraw-Hill, New York, p 351
3. Buchwalter LP (1996) In: Ghosh MK, Mittal KL (eds) Polyimides: fundamentals and applications, Marcel Dekker, New York, p 587 and references therein
4. Matienzo LJ, Unertl WN (1995) In: Ghosh MK, Mittal KL (eds) Polyimides: fundamentals and applications, Marcel Dekker, New York, p 629
5. Stoffel NC (1995) Interdiffusion and adhesion of polyimides. PhD Thesis, Cornell University
6. Goldblatt RD, Ferreiro LM, Nunes SL, Thomas RR, Chou NJ, Buchwalter LP, Henidereich JE, Chao TH, (1992) J Appl Polym Sci 46:218910.1002/app.1992.070461216 ↗
7. Brody AL (2003) Food Technol 57:75
8. Matienzo LJ, Winnacker SK (2002) Macromol Mater Eng 287:87110.1002/mame.200290022 ↗
9. Egitto FD, Matienzo LJ, Morrison BO Jr (1997) US Patent 5,693,928
10. Wang F (1998) Polydimethylsiloxane modification of segmented thermoplastic polyurethanes and polyureas. Doctoral Dissertation. Virginia Polytechnic Institute, Blacksburg, VA, USA
11. Arkles B, Janeiro B, Berry DH, Ezbiansky KA, Composto RJ (2000) In: Proceedings of silicones in coatings III, Barcelona, Spain, 28–30 March, 2000, The Paint Research Association, Teddington Middlesex, UK, p 1
12. Egitto FD, Matienzo LJ, Spalik JM, Fuerniss SJ (1995) In: Proceedings of the MRS Spring Meeting: polymer/inorganic interfaces II, 385, San Francisco, CA, USA, 17–21, Materials Research Society, p 24510.1557/PROC-385-245 ↗
13. Seyferth D (1990) Adv Chem Ser No 224:56510.1021/ba-1990-0224.ch031 ↗
14. Arkles B, Berry DH, Figge LK, Composto RJ, Chiou T, Colazzo H, Wallace WE (1997) J Sol-Gel Sci Technol 8:465
15. Pan Q, Gonzalez GB, Composto RJ, Wallace WE, Arkles B, Figge LK, Berry DH (1999) Thin Solid Films 345:24410.1016/S0040-6090(98)01740-4 ↗
16. Ghate PB (1982) In: Bunshah RF (ed) Position technologies for films and coatings, Noyes Publications, Park Ridge, NJ, USA, p 514
17. Kurosawa K, Maezono Y, Miyano J, Motoyama Y, Yokotani A (2001) J Phys 11:739
18. Hitchman ML, Alexandrov SE (2001) Electrochem Soc Interface Summer:4010.1149/2.F07012IF ↗
19. Pecheur A, Autran JL, Lazarri JP, Piners P (1999) J Non-Crystal Solids 245:2010.1016/S0022-3093(98)00868-0 ↗
20. Li J, Mayer JW, Matienzo LJ, Emmi F (1992) Mater Chem Phys 32:39010.1016/0254-0584(92)90186-C ↗
21. Kalachev AA, Mathauer K, Hohne U, Mohwald H, Wegner G (1993) Thin Solid Films 228:30710.1016/0040-6090(93)90623-W ↗
22. Mirley CL, Koberstein JT (1995) Langmuir 11:104910.1021/la00004a001 ↗
23. Hildebrandt JH (1916) J Am Chem Soc 38:145210.1021/ja02265a002 ↗
24. Van Krevelen DW, Hoftyzer PJ (1976) Properties of polymers. Elsevier Scientific Publishing Company, Amsterdam, p 141
25. Jarvis NL, Fox RB, Zisman WA (1964) Adv. Chem. Ser. No. 43. ACS, Washington, DC, p 317
26. Dwight D, Mcgrath JE, Lawson G, Patel N, York G (1989) In: Culbertson BM (ed) Multiphase macromolecular systems, Plenum Publishing Corporation, p 265
27. Li L, Chan CM, Liu S, An L, Ng KM, Weng LT, Ho KC (2000) Macromolecules 33:800210.1021/ma991445e ↗
28. Egitto FD, Matienzo LJ (2006) J Mater Sci 41:636210.1007/s10853-006-0712-5 ↗
29. Egitto FD, Matienzo LJ (1994) IBM J Res Dev 38:42310.1147/rd.384.0423 ↗
30. Roberts ED (1973) J Electrochem Soc 120:171610.1149/1.2403351 ↗
31. Feneberg P, Krekeler U (1976) US Patent 3,959,105
32. Owen MJ, Smith PJ (1994) J Adhes Sci Technol 8:106310.1163/156856194X00942 ↗
33. Sharma J, Berry DH, Composto RJ, Dai HL (1999) J Mater Res 14:99010.1557/JMR.1999.0132 ↗
34. Matienzo LJ, Egitto FD (2006) J Mater Sci 41:6374
35. Rabek JF (1975) In: Bamford CH, Tipper CFH (eds) Comprehensive chemical kinetics, vol 14, Degradation of polymers, Elsevier Scientific Publishing Company, Amsterdam, The Netherlands, p 423
36. Eliasson B, Hirth M, Kogelschatz U (1987) J Phys D Appl Phys 20:142110.1088/0022-3727/20/11/010 ↗
37. Eliasson B, Kogelschatz U (1991) IEEE Trans Plasma Sci 19:106310.1109/27.125031 ↗
38. Greenwood OD, Tasker S, Badyal JPS (1994) J Polym Sci A Polym Chem 32:247910.1002/pola.1994.080321309 ↗
39. Sener U, Entenberg A, Kahn B, Egitto FD, Matienzo LJ, Debies T, Takacs GA (2005) In: Mittal KL (ed) Polyimides and other high temperature polymers: synthesis, characterization and applications, vol 3, VSP, Leiden, The Netherlands, p 53510.1201/b12194-30 ↗
40. D. Briggs, Sheah MP (1983) Practical surface analysis. John Wiley & Sons, Chichister, UK, p 133
41. Zhang Q, Huang H, He H, Chen H, Shao H, Liu Z (1999) Surface Sci 440:14210.1016/S0039-6028(99)00789-X ↗
42. Chela J (1996) In: Ghosh MK, Mittal KL (eds) Polyimides: fundamentals, applications, Marcel Dekker, New York, p 360 and references therein
43. Beamson G, Briggs D (1982) High resolution XPS of organic polymers: the Scienta ESCA300 Database. John Wiley & Sons, Chichister, UK
44. Matienzo LJ, Egitto FD (1995) Solid State Technol 38:99
45. Buchwalter S, Brofman P, Gaynes MA, Lee KW, Matienzo LJ, Questad D (2005) IBM J Res Dev 49:66310.1147/rd.494.0663 ↗
46. Bierlage MAM (1994) Polyimide ultrafiltration membranes for non-aqueous systems. Doctoral Dissertation. Twente University, The Netherlands
47. Lee HR, Lee YD (1990) J Appl Polym Sci 40:208710.1002/app.1990.070401122 ↗
48. Tiwari A, Gupta MK, Nema SK (2004) J Mater Sci 39:169510.1023/B:JMSC.0000016172.09723.ee ↗
49. Tiwari A, Nema AK, Das CK, Nema SK (2004) Thermochim Acta 417:13310.1016/j.tca.2003.10.003 ↗
50. Tiwari A, Nema SK (2003) J Mater Res Innovations 7:13310.1007/s10019-002-0226-y ↗
51. Schalek RL, Askeland PA, Drzal LT (2000) In: Proc. 23rd. Annual Meeting of the Adhesion Society, Myrtle Beach, S.C. February 21–24 2000, p 481
52. Shioji M, Shiraishi T, Takahashi T, Nohira H, Azuma K, Shin S, Kobayashi K, Hattori T (2004) Appl Phys Lett 84:357610.1063/1.1737793 ↗
53. Hillborg H, Enker JF, Gedde UW, Smith GD, Yasuda HK, Wikström K (2000) Polymer 41:685110.1016/S0032-3861(00)00039-2 ↗
54. Schnyder B, Lippert T, Kotz R, Wokaun A, Graubner VM, Nuyke O (2003) Surf Sci 532–535:106710.1016/S0039-6028(03)00148-1 ↗
55. Effemenko K, Wallace WE, Genzer J (2002) J Colloid Interface Sci 254:30610.1006/jcis.2002.8594 ↗
56. Hsie G-H, Chen J-K, Liu Y-L (2000) J Appl Polym Sci 76:160910.1002/(SICI)1097-4628(20000613)76:11<1609::AID-APP1>3.0.CO;2-W ↗
57. Xenopoulos C, Mascia L, Shaw SJ (2002) J Mater Chem 12:21310.1039/b105434c ↗