journal article·2000-12

Microstructural characteristics of 2124 Al – 40 vol.% SiCp metal matrix composites produced by room temperature shock consolidation and hot shock consolidation

K. Siva Kumar, K. Hokamoto

Journal of Materials Science· Volume 35· Issue 23
Publisher page

Abstract

2124 Al – 40 vol.% SiCp metal matrix composites have been consolidated by room temperature shock consolidation using axisymmetric assembly, and by one-dimensional hot shock consolidation using underwater shock wave assembly. Trimonite powder explosive was used in room temperature consolidation and SEP explosive was used in hot shock consolidation. The thickness of the explosive layer used in room temperature consolidation was 27 mm. The thickness of the water layer employed in the hot consolidation experiments was 15 mm. The hot shock consolidation was carried out at 200°C, 300°C and 400°C. The microstructural variations across the cross section of the room temperature shock consolidated compact and, the effect of the temperature on microstructure and hardness of the hot consolidated composites have been investigated. Microstructural comparison was made between the composites produced by both room temperature consolidation and hot consolidation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. B. H. Rabin, G. E. Korth and R. L. Williamson, in “Processing, Modeling and Mechanical Behavior,” edited by R. B. Bhagat, A. H. Clauer, P.Kumar and A. M. Ritter (The Minerals, Metals and Materials Society, 1990) p. 281.
2. K. Siva Kumar, Y. R. Mahajan, N. Ramakrishnan and V. V. Bhanu Prasad, Int. J. Powder. Metall. 28 (1992) 63.
3. K. S. Kumar, T. Balakrishna Bhat and N. Ramakrishnan, “The Processing, Properties and Applications of Metallic and Ceramic Materials, Conf. Proceedings, Vol. II” (Engineering Materials Advisory Services Ltd., Birmingham, U.K, 1992) p. 719.
4. K. Siva Kumar, T. Balakrishna Bhat and P. Ramakrishnan, J. Mater. Processing Technol. 73 (1998) 268.10.1016/S0924-0136(97)00237-9 ↗
5. K. Siva Kumar, T. Balakrishna Bhat and P. Ramakrishnan Idem., ibid. 85 (1999) 125.10.1016/S0924-0136(98)00275-1 ↗
6. K. Siva Kumar, PhD dissertation, Indian Institute of Technology, Bombay, India, October 1996.
7. K. Siva Kumar, T. Balakrishna Bhat and P. Ramakrishnan, J. Mater. Processing Technol. 62 (1996) 191.10.1016/0924-0136(95)02231-7 ↗
8. T. BALAKRISHNA BHAT and P. RAMAKRISHNAN Idem., in Advanced Materials '93, Proceedings of the 3rd IUMRS International Conference on Advanced Materials, Tokyo, August- September, edited by M. Sakai, E. Yasuda, S. Yamada, Y. Huang and L. Nicolais (Elsevier Science, 1994) p. 795. Trans. Mat. Res. Soc. Jpn., Vol. 16B.
9. K. Hokamoto, S. S. Shang, L. H. Yu and M. A. Meyers, in “Shock-Wave and High-Strain-Rate Phenomena in Materials,” edited by M. A. Meyers, L. E. Murr and K. P. Staudhammer (Marcel Dekker, New York, 1992) p. 453.
10. S. S. Shang, K. Hokamoto and M. A. Meyers, J. Mater. Sci. 27 (1992) 5470.10.1007/BF00541608 ↗
11. S. L. Wang, M. A. Meyers and A. Szecket, ibid. 23 (1988) 1786.10.1007/BF01115723 ↗
12. T. Taniguchi and K. Kondo, Adv. Ceram. Mater. 3 (1988) 399.10.1111/j.1551-2916.1988.tb00242.x ↗
13. A. Ferreira, M. A. Meyers, N. N. Thadhani, S. N. Chang and J. R. Kough, Metall. Trans. 22A (1991) 685.10.1007/BF02670291 ↗
14. A. Chiba, M. Fujita, M. Nishida, K. Imamura and R. Tomoshige, in “Shock-Wave and High-Strain-Rate Phenomena in Materials,” edited by M. A. Meyers, L. E. Murr and K. P. Staudhammer (Marcel Dekker, New York, 1992) p. 415.
15. K. Hokamoto, M. Fujita, A. Chiba, S. Itoh, S. Tanaka, H. Hirose, T. Kugimoto and R. Tomoshige, in “Metallurgical and Materials Applications of Shock-Wave and High-Strain-Rate Phenomena,” edited by L. E. Murr, K. P. Staudhammer and M. A. Meyers (Elsevier, New York, 1996) p. 117.
16. K. Hokamoto, S. Tanaka, M. Fujita, T. Kugimoto, A. Chiba, S. Itoh and T. Mashimo, in Proceedings of the 5th International Conference on Technology of Plasticity, Columbus, OH, October 1996, edited by T. Altan, p. 911.
17. K. Hokamoto, M. Fujita, S. Tanaka, T. Kodama and Y. Ujimoto, Scripta Materialia 39 (1998) 1383.10.1016/S1359-6462(98)00311-X ↗
18. K. Siva Kumar, K. Satya Prasad, T. Balakrishna Bhat and P. Ramakrishnan, J. Mater. Sci. 32 (1997) 5271.10.1023/A:1018654525243 ↗
19. R. A. Prummer and G. Ziegler, Powder Metall. Int. 9 (1977) 11.
20. D. Raybould, D. G. Morris and G. A. Cooper, J. Mater. Sci. 14 (1979) 2523.10.1007/BF00737047 ↗
21. K. Hokamoto, T. Izuma and M. Fujita, Metall. Trans. 24A (1993) 2289.10.1007/BF02648602 ↗
22. K. P. Staudhammer and K. A. Johnson, in “Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena,” edited by L. E. Murr, K. P. Staudhammer and M. A. Meyers (Mercel Dekker, New York, 1996) p. 149.
23. S. Itoh, S. Kubota, S. Nagano, K. Hokamoto, M. Fujita and A. Chiba, Trans. JSME 61 B (1995) 2981.10.1299/kikaib.61.2981 ↗