journal article·2002-06

Effect of sulfide ions on the stress corrosion behaviour of Al-brass and Cu10Ni alloys in salt water

S. M. Sayed, E. A. Ashour, G. I. Youssef, S. M. El-Raghy

Journal of Materials Science· Volume 37· Issue 11
Publisher page

Abstract

The stress corrosion cracking (SCC) behavior of Al-brass and Cu10Ni alloys was investigated in 3.5% NaCl solution in absence and in presence of different concentrations of Na2S under open-circuit potentials using the constant slow strain rate technique. The results indicated that the Cu10Ni alloy is more susceptible to stress corrosion cracking than as-received Al-brass at strain rate of 3.5 × 10−6 s−1 in 3.5% NaCl in presence of high concentration of sulfide ions (1000 ppm). The sulfide ions (up to 500 ppm) has no effect on the stress corrosion cracking of the annealed Al-brass in 3.5% NaCl at two strain rates of 7.4 × 10−6 and 3.5 × 10−6 s−1. The results support film rupture for Al-brass and sulfide stress corrosion cracking assisted with pitting corrosion for Cu10Ni at slip steps as the operating mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Science · Aluminum Alloy Microstructure Properties · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. A. H. TUTHILL, Materials Performance 26 (1987) 12.
2. R. F. NORTH and M. J. PRYOR, Corros. Sci. 10 (1970) 197.10.1016/S0010-938X(70)80022-1 ↗
3. B. G. ATEYA, E. A. ASHOUR and S. M. SAYED, J. Elecrochem. Soc. 141 (1994) 71.10.1149/1.2054712 ↗
4. B. LITTLE and F. MANSFELD, Werk. und Korros. 42 (1991) 331.10.1002/maco.19910420702 ↗
5. H. J. MUELLER, Corrosion 45 (1989) 735.10.5006/1.3585028 ↗
6. H. W. HOPPE and H. H. STREHBLOW, Corros. Sci. 31 (1990) 167.10.1016/0010-938X(90)90105-E ↗
7. E. A. ASHOUR and B. G. ATEYA, ibid. 37 (1995) 371.10.1016/0010-938X(94)E0011-S ↗
8. R. N. SINGH, N. VERMA and W. R. SINGH, Corrosion 35 (1989) 222.10.5006/1.3577846 ↗
9. J. CROUSIER and J. P. CROUSIER, ibid. 44 (1988) 768.10.5006/1.3584945 ↗
10. D. D. MACDONALD, B. C. SYRETT and S. S. WING, ibid. 35 (1979) 409.10.5006/0010-9312-35.9.409 ↗
11. C. KATO, H. W. PICKERING and J. E. CASTLE, J. Electrochem. Soc.131 (1984) 1225.10.1149/1.2115792 ↗
12. J. P. GUDAS and H. P. HACK, Corrosion 35 (1979) 67.10.5006/0010-9312-35.2.67 ↗
13. H. M. SHALABY, A. AL-HASHEM and K. ALMUHANNA, Brit. Corros. J.31 (1996) 199.10.1179/bcj.1996.31.3.199 ↗
14. S. JACOBS and M. EDWARDS, Water Research 34 (2000) 2798.10.1016/S0043-1354(00)00025-7 ↗
15. J. N. ALHAJJI and M. R. REDA, J. Electrochem. Soc. 142 (1995) 2944.10.1149/1.2048669 ↗
16. E. A. ASHOUR, J. Mater. Sci. 36 (2000) 201.10.1023/A:1004865725794 ↗
17. D. THOMPSON, Material Research Study 1 (1961) 108.
18. M. ISLAM, W. T. RAID, S. AL-KHARRAZ and S. ADONAMOUS, Corrosion 47 (1991) 4.
19. K. HABIB and A. HUSAIN, Desalination 97 (1994) 29.10.1016/0011-9164(94)00071-9 ↗
20. A. EL-DOMIATY and J. N. ALHAJJI, J. Materials Engineering and Performance 6 (1997) 534.10.1007/s11665-997-0126-9 ↗
21. B. TODD, Desalination 3 (1967) 106.10.1016/S0011-9164(00)84030-8 ↗
22. S. TORCHI and F. MAZZA, Corros. Sci. 26 (1984) 813.10.1016/0010-938X(86)90065-X ↗
23. E. A. ASHOUR, E. A. ABD EL-MEGUID and B. G. ATEYA, Corrosion 53 (1997) 612.10.5006/1.3290293 ↗