journal article·2003-02

Microstructural evaluation of fatigue damage in SA533-B1 and type 316L stainless steels

C. Y. Chen, J. Y. Huang, J. J. Yeh, R. C. Kuo, J. R. Hwang, J. G. Huang

Journal of Materials Science· Volume 38· Issue 4
Publisher page

Abstract

Transmission electron microscopy (TEM) examinations were made on fatigued SA533-B1 low alloy steel and Type 316L stainless steel specimens with the intention to investigate the mis-orientation changes among dislocation cells and the evolution of dislocation structures. Contrary to what might be expected for the cell structures, no clear relationship between fatigue damage and the mis-orientation changes of cell walls (or subgrain boundaries) was found in the fatigued samples of SA533-B1 steel (a bcc structure); however, significant changes of dislocation structures were observed in the fatigued samples of Type 316L stainless steel (an fcc structure). This could be accounted for by their different structures as well as complicated defect structures such as subgrain boundaries, small carbides, and dislocations inhomogeneously distributed in the SA533-B1 steel. It is interesting to note that at room temperature dislocations of fatigued SS316L specimens were observed to arrange themselves on {111} slip planes, in contrast, at 300°C the dislocations tend to move from their slip planes into subgrain boundaries in the surface layers rather than in the cross sectional layers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (7)

Show source-provided references
1. C. Fukuoka and Y.G. Nakagawa, Scripta Mater. 34 (1996) 1497.10.1016/1359-6462(95)00685-0 ↗
2. C. Fukuoka, H. Yoshizawa, Y.G. Nakagawa and M. E. Lapides, Metall. Trans. A 24A (1993) 2209.10.1007/BF02648595 ↗
3. Y. G. Nakagawa, H. Yoshizawa and M. E. Lapides, ibid. 21A (1990) 1989.10.1007/BF02647246 ↗
4. ASTMA533/A533M-93, “Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel.”
5. J. W. Edington, “Practical Electron Microscopy inMaterial Science” (Macmillan, London, 1976) p. 56.
6. C.Y. Chen and W. M. Stobbs, Ultramicroscopy 58 (1995) 289.10.1016/0304-3991(95)00045-3 ↗
7. R. E. Reed-Hill, “Physical Metallurgy Principles”(Van Nostrand Company, New York, 1973) p. 282.