journal article·2000-02

Effects of yttrium and cerium additives in lubricants on corrosive wear of stainless steel 304 and Al alloy 6061

R. Liu, D. Y. Li

Journal of Materials Science· Volume 35· Issue 3
Publisher page

Abstract

Effects of oxygen active elements, yttrium and cerium, as additives in commercial lubricants on corrosive wear were investigated. Sliding wear losses of stainless steel 304 and Al alloy 6061 lubricated by oil and thin grease respectively with and without yttrium or cerium additive in a corrosive environment were determined. Dilute H2SO4 solution (10% H2SO4) was used as the corrosive medium and added to the lubricants for the corrosive wear test. The wear test was performed on a pin-on-disc tribometer with the capability of measuring wear in lubricant. The disc was coiled with a copper tube, through which cooling water could pass, so that the wear losses respectively under cooling condition and non-cooling condition could be determined. The results showed that wear losses of the tested materials caused by synergistic attack of wear and corrosion can be effectively reduced by adding small amounts of yttrium or cerium to the lubricant. In addition, the effect of the additives was found more distinctive under the non-cooling condition. Worn surfaces were examined using SEM to clarify the wear mode and thus the wear mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. B. W. Madsen, “ASM Handbook: Friction, Lubrication, and Wear Technology,” Vol. 18 (Bureau of Mines, USA, 1998) pp. 271-277.
2. A. V. Levy, “Solid Particle Erosion and Erosion-Corrosion of Materials” (ASM International, Materials Park, Ohio, USA 1995).
3. R. J. Mc kay and R. Worthington, “Corrosion Resistance of Metal and Alloys” (New York, USA, 1946).
4. U. R. Evans, “The Corrosion and Oxidation of Metals,” Second Supplementary Volume (Edward Arnold, London, 1976).
5. T. C. Zhang and D. Y. Li, Mater. Sci. & Tech. to be published.
6. Idem., Surface & Coatings Technology, to be published.
7. E. J. Felten, J. Electrochem. Soc. 108 (1961) 490-495.10.1149/1.2428122 ↗
8. C. S. Wukusick and J. F. Collins, Mat. Res. And Standards 4 (1964) 637-646.
9. J. M. Francis and W. H. Whitlow,Corrosion Science 5 (1965) 701-710.10.1016/S0010-938X(65)80026-9 ↗
10. J. K. Tien and F. S. Pettit, Metallurgical Transactions 3 (1972) 1587-1599.10.1007/BF02643050 ↗
11. F. Clemendot, J. M. Gras, J. C. Van Duysen and G. Zacharie, Corrosion Science 35 (1993) 901-908.10.1016/0010-938X(93)90307-3 ↗
12. B. A. Pint, Oxidation of Metals 45 (1996) 1-37.10.1007/BF01046818 ↗
13. A. U. Seybolt, Corrosion Science 6 (1966) 263-269.10.1016/S0010-938X(66)80086-0 ↗
14. C. S. Giggins, E. J. Felten and F. S. Pettit, in “Stress Effects and the Oxidation of Metals,” Materials Science Symposium, edited by J. V. Cathcart (Metallurgical Society of AIME, New York, 1975) pp. 245-261.
15. T. A. Ramanarayanan and R. Petkovic-luton, Oxidation of Metals 29 (1988) 445-472.10.1007/BF00666845 ↗
16. W. E. King, J. H. Park, J. L. Routbort and K. C. Goretta, ibid. 29 (1988) 217-223.10.1007/BF00751796 ↗
17. J. E. Antill, M. J. Bennett, R. F. A. Carney, G. Dearnaley, F. H. Fern, P. D. Goode, B. L. Myatt, J. F. Turner and J. B. Warburton,Corrosion Science 16 (1976) 729-745.
18. J. C. Pivin, C. Roques-carmes, J. Chaumont and H. Bernas, ibid. 20 (1980) 947-962.10.1016/0010-938X(80)90076-1 ↗
19. M. J. Cristobal, P. N. Gibson and M. F. Stroosnijder, ibid. 38 (1996) 805-822.10.1016/0010-938X(95)00168-J ↗
20. K. Y. Kim, S. H. Kim, K. W. Kwon and L. H. Kim, Oxidation of Metals 41 (1994) 179-201.10.1007/BF01080780 ↗
21. Y. Longa and M. Takemoto, ibid. 41 (1994) 301-321.10.1007/BF01113368 ↗
22. S. Roure, F. Czerwinski and A. Petric,ibid. 42 (1994) 75-102.10.1007/BF01061925 ↗
23. M. F. Ashby and D. R. H. Jones, “Engineering Materials 1, An Introduction to Their Properties and Applications” (Bodmin, Cornwall, 1980) pp. 241-249.
24. F. A. A. Crane and J. A. Charles, in “Selection and Use of Engineering Materials” (Letchworth, Herts, 1984) pp. 178-183.
25. N. P. Suh, “Tribophysics” (Englewood Cliff, New Jersey, 1986) pp. 195-221.
26. R. H. Jones and R. E. Ricker, in “Stress-Corrosion Cracking, Materials Performance and Evaluation,” edited by R. H. Jones (Ohio, USA, 1992) pp. 1-40.10.31399/asm.tb.sccmpe2.t55090001 ↗
27. H. Kaesche, “Metallic Corrosion, Principles of Physical Chemistry and Current Problems” (Houston, Texas, 1985).
28. Y. C. Lu and M. B. Ives,Corrosion Science 34 (1993) 1773-1785.10.1016/0010-938X(93)90015-9 ↗