journal article·2001-11

Deposition of hydrogenated amorphous carbon films from CH4/Ar plasmas: Ar dilution effects

L. Valentini, J. M. Kenny, G. Mariotto, P. Tosi

Journal of Materials Science· Volume 36· Issue 21
Publisher page

Abstract

Hydrogenated amorphous carbon (a-C:H) films were deposited, at room temperature, from a CH4/Ar plasma produced by a radio frequency (r.f.) glow discharge system at 13.56 MHz, and different power values. Two different characterisation techniques, Raman and FTIR spectroscopies, have been used to investigate correlations between deposition conditions and properties of hydrogenated amorphous carbon films. The composition of the initial gaseous mixture and the r.f. power input are shown to affect significantly both mechanical and microstructural properties of deposited films. As the fraction of argon in the feed gas is increased, the deposition rate increases and the deposited film shows a higher friction coefficient, thus suggesting the production of a softer material. On the other hand, Raman measurements suggest the occurrence of a lower degree of structural order in the sp2 lattice. Experimental findings are discussed in terms of the different chemical composition of the plasma.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. H. Tsai and D. B. Bogy, J. Vac. Sci. Technology A 5 (1987) 3287.10.1116/1.574188 ↗
2. D. M. Gruen, C. D. Zuiker, A. R. Krauss and X. Pan, ibid. 13 (1995) 1628.10.1116/1.579742 ↗
3. O. Matsumoto, H. Toshima and Y. Kanzaki, Thin Solid Films 128 (1985) 341.10.1016/0040-6090(85)90084-7 ↗
4. H. C. Shish, C. P. Sung and W. T. Hsu, Diamond and Related Materials 2 (1993) 531.10.1016/0925-9635(93)90115-I ↗
5. H. C. Shish, C. P. Sung and W. L. Fan, Surf. Coat. Technology 54/55 (1992) 380.10.1016/S0257-8972(07)80052-1 ↗
6. W. Zhu, A. Inspektor, A. R. Badzian, T. Mckenna and R. Messier, J. Appl. Phys. 68(4) (1990) 1489.10.1063/1.346679 ↗
7. N. Mutsukura and K. Yoshida, Diamond and Related Materials 5 (1996) 919.10.1016/0925-9635(95)00495-5 ↗
8. N. Mutsukura and K. Saitoh, J. Vac. Sci. Technology A 14 (1996) 2666.10.1116/1.579999 ↗
9. T. G. McCauley, D. M. Gruen and A. R. Krauss, Appl. Phys. Lett. 73 (1998) 1646.10.1063/1.122233 ↗
10. N. Fourches, G. Turban and B. Grolleau, Appl. Surf. Sci. 68 (1993) 149.10.1016/0169-4332(93)90224-Y ↗
11. J. C. Angus, P. Koidl and S. Domitz, Plasma Deposited Thin Films (1986) 89.10.1201/9781351075817-4 ↗
12. J. W. Zou, K. Reichelt, K. Schimdt and B. Dischler, J. Appl. Phys. 65(10) (1989) 3914.10.1063/1.343355 ↗
13. Idem., ibid. 67(1) (1990) 487.
14. F. Tuinstra and J. L. Konig, J. Chem. Phys. 53(3) (1970) 1126.10.1063/1.1674108 ↗
15. N. Wada, P. J. Gaczi and S. A. Solin, J. Non-Cryst. Solids 35/36 (1980) 543.10.1016/0022-3093(80)90651-1 ↗
16. G. Mariotto, F. L. Freire and C. A. Achete, Thin Solid Films 241 (1994) 255.10.1016/0040-6090(94)90436-7 ↗
17. L. Valentini, J. M. Kenny, H. Haefke and A. Perret, to be published.
18. R. O. Dillon, J. A. Woollam and V. Katkanant, Phys. Rev. B 29 (1984) 3482.10.1103/PhysRevB.29.3482 ↗
19. J. H. Lee, Y. H. Lee and B. Farouk, J. Vac. Sci. Technology A 14 (1996) 2702.10.1116/1.580191 ↗
20. C. Riccardi, R. Barni, M. Fontanesi and P. Tosi, to be published.