Microstructure and strength of a deformation processed Al-20%Sn in situ composite
Source abstract
Abstract
An Al-20 vol% Sn metal-metal composite was deformation processed by extrusion, swaging, and wire drawing to a total true strain of 7.4, resulting in a microstructure with Sn filaments in an Al matrix. Both the size and spacing of the Sn filaments decreased as deformation processing progressed. The strength of these composites increased exponentially with the reduction in spacing of the Sn filaments. Immediately after deformation, the Sn second phase showed a convoluted, ribbon-shaped filamentary morphology, but the Sn filaments spheroidized during prolonged storage at room temperature. A thermodynamic assessment is presented for this spheroidization phenomenon.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. J. BEVK, J. P. HARBISON and J. L. BELL, J. Appl. Physics 49 (1978)6031.10.1063/1.324573 ↗
2. W. A. SPITZIG, A. R. PELTON and F. C. LAABS, Acta Metall. 35 (1987) 2427.10.1016/0001-6160(87)90140-4 ↗
3. W. A. SPITZIG, C. L. TRYBUS and F. C. LAABS, Mat. Sci. Eng. A 145 (1991) 179.10.1016/0921-5093(91)90247-K ↗
4. S. POURRAHIMI, H. NAYEB-HASHEMI and S. FONER, J. Mater. Sci. Lett. 9 (1990) 1484.10.1007/BF00721624 ↗
5. Idem., Metall. Trans. A 23A (1992) 573.10.1007/BF02801175 ↗
6. J. D. VERHOEVEN, L. S. CHUMBLEY, F.C. LAABS and W. A. SPITZIG, Acta Metall. 39 (1991) 2825. 521310.1016/0956-7151(91)90100-F ↗
7. J. D. VERHOEVEN, F.A. SCHMIDT, E. D. GIBSON and W. A. SPITZIG, J. Metals 38 (1986) 20.
8. P.D. FUNKENBUSCH, T. H. COURTNEY and D. G. KUBISCH, Scripta Metall. 18 (1984) 1099.10.1016/0036-9748(84)90186-8 ↗
9. Y. LENG, T. H. COURTNEY and J. C. MALZAHN KAMPE, Mat. Sci. Eng. 94 (1987) 209.10.1016/0025-5416(87)90335-1 ↗
10. W. A. BACKOFEN, “Deformation Processing” (Addison-Wesley, Reading, MA, 1972) p. 51, 75 and 295.
11. A. M. RUSSELL, L. S. CHUMBLEY, T. W. ELLIS, F. C. LAABS, B. NORRIS and G.E. DONIZETTI, J. Mater. Sci. 30 (1995) 4249.10.1007/BF00361504 ↗
12. A. M. RUSSELL, T. W. ELLIS and L.S. CHUMBLEY, ibid. 30 (1995) 2070.10.1007/BF00353036 ↗
13. J. A. JENSEN, A. M. RUSSELL, T.W. ELLIS and L. S. CHUMBLEY, in “Light Metals, ” edited by J. Evans (TMS, Warrendale, PA (1995) p. 1367.
14. J. A. JENSEN and L. S. CHUMBLEY, Metallurgical and Materials Transactions A 29A(1998) 863.10.1007/s11661-998-0277-9 ↗
15. A. M. RUSSELL, T. LUND, L. S. CHUMBLEY, F. C. LAABS, L. L. KEEHNERand J. L. HARRINGA, Composites: Part A 30 (1999) 239.10.1016/S1359-835X(98)00163-8 ↗
16. K. XU, A. M. RUSSELL, L.S. CHUMBLEY, F. C. LAABS, V. B. GANTOVNIK and Y. TIAN, J. Mater. Sci. 34(24) (1999).10.1023/A:1004772526480 ↗
17. J. D. EMBURY and R. M. FISHER, Acta Metall. 14 (1966) 147.10.1016/0001-6160(66)90296-3 ↗
18. B. W. CHRIST, ASMMetals Handbook 8 (1985) 28.
19. J. C. MALZAHN KAMPE, T. H. COURTNEY and Y. LENG,Acta Metall. 37(7) (1989) 1735.10.1016/0001-6160(89)90059-X ↗
20. T. H. COURTNEY and J. C. MALZAHN KAMPE, ibid. 37(7) (1989) 1747.
21. J. D. EMBURY, Scripta Metall. 27 (1992) 981.10.1016/0956-716X(92)90460-V ↗
22. Y. SAKAI and H. J. SCHNEIDER-MUNTAU, Acta Mater. 45(3) (1997) 1017. Received 26 February and accepted 15 March 2002 521410.1016/S1359-6454(96)00248-0 ↗