Hygrothermal recovery of compression wood in relation to elastic growth stress and its physicochemical characteristics
Source abstract
Abstract
Hygrothermal recovery (HTR), the dimensional changes in wood induced by hygrothermal treatment, was investigated using both compression and normal wood of sugi (Cryptomeria japonica). The elastic released strain of growth stress was measured on living tree surfaces; subsequently, the specimens were taken from the same position to measure HTR. HTR was measured as dimensional changes due to treatment at 20, 40, 60, 80, and 100 °C in hot water ranging from 200 min to 177 days. The intensity of HTR had a positive relationship with elastic released strain of growth stress. This result suggests that HTR is the relaxation of the viscoelastic component of growth stress accumulated during the maturation process of trees. The rate of HTR clearly showed a time–temperature dependency: higher at higher treatment temperatures and lower at lower treatment temperatures. Based on kinetic analysis, the apparent activation energy (Ea) was calculated as 407 kJ/mol, which is similar to the published Ea of lignin softening implying that the HTR is a lignin-related phenomenon.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Wood Treatment and Properties · Natural Fiber Reinforced Composites · Tree Root and Stability Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Kübler H (1987) Growth stresses in trees and related wood properties. For Prod Abstr 10:61–119
2. Yokota T, Tarkow H (1962) Changes in dimension on heating green wood. For Prod J 12:43–45
3. Sharma SN, Bali BI, Lohani RC (1978) Abnormal dimensional changes on heating green sal (Shorea robusta). Wood Sci 10:142–150
4. Bardet S, Gril J, Kojiro K (2012) Thermal strain of green Hinoki wood: separating the hygrothermal recovery and the reversible deformation. In: Frémond M, Maceri F (eds) Lecture notes in applied and computational mechanics, vol 61, mechanics, models and methods in civil engineering, vol 61. Springer, Berlin, pp 157–16210.1007/978-3-642-24638-8_8 ↗
5. Abe K, Yamamoto H (2007) The influences of boiling and drying treatment on the behaviors of tension wood with gelatinous layers in Zelkova serrata. J Wood Sci 53:5–1010.1007/s10086-006-0815-2 ↗
6. Clair B (2012) Evidence that release of internal stress contributes to drying strains of wood. Holzforschung 66:349–35310.1515/hf.2011.159 ↗
7. Sujan KC, Yamamoto H, Matsuo M, Yoshida M, Naito K, Shirai T (2015) Continuum contraction of tension wood fiber induced by repetitive hygrothermal treatment. Wood Sci Technol 49:1157–116910.1007/s00226-015-0762-4 ↗
8. Tanaka M, Yamamoto H, Kojima M, Yoshida M, Matsuo M, Abubakar ML, Hongo I, Arizono T (2014) The interrelation between microfibril angle (MFA) and hygrothermal recovery (HTR) in compression wood and normal wood of Sugi and Agathis. Holzforschung 68:823–83010.1515/hf-2013-0153 ↗
9. Barber NF, Meylan BA (1964) The anisotropic shrinkage of wood. A theoretical model. Holzforschung 18:146–15610.1515/hfsg.1964.18.5.146 ↗
10. Grzeczyński T (1962) Einfluß der Erwärmung im Wasser auf vorübergehende und bleibende Formänderungen frischen Rotbuchenholzes. Holz als Roh- und Werkstoff 20:210–216 (In German)10.1007/BF02616048 ↗
11. Noack Von D (1969) About the hot-water treatment of European beech wood in the temperature range from 100 to 180°C. Holzforschung und Holzverwertung 21:118–124
12. Sujan KC, Yamamoto H, Matsuo M, Yoshida M, Naito K, Suzuki Y, Yamashita N, Yamaji FM (2016) Is hygrothermal recovery of tension wood temperature-dependent? Wood Sci Technol. doi: 10.1007/s00226-016-0817-110.1007/s00226-016-0817-1 ↗
13. Sasaki Y, Okuyama T (1983) Residual stress and dimensional change on heating green wood. Mokuzai Gakkaishi 29:302–307
14. Gril J, Thibaut B (1994) Tree mechanics and wood mechanics: relating hygrothermal recovery of green wood to the maturation process. Ann Sci For 51:329–33810.1051/forest:19940311 ↗
15. Okuyama T, Sasaki Y, Kikata Y, Kawai N (1981) The seasonal change in growth stress in the tree trunk. Mokuzai Gakkaishi 27:350–355
16. Yamamoto H, Okuyama T, Iguchi M (1989) Measurement of growth stresses on the surface of a leaning stem. Mokuzai Gakkaishi 35:595–601 (In Japanese)
17. Yoshida M, Okuyama T (2002) Techniques for measuring growth stress on the xylem surface using strain and dial gauges. Holzforschung 56:461–46710.1515/HF.2002.071 ↗
18. Ding HZ, Wang ZD (2007) Time-temperature superposition method for predicting the permanence of paper by extrapolating accelerated ageing data to ambient conditions. Cellulose 14:171–18110.1007/s10570-007-9114-3 ↗
19. Gillen KT, Clough RL (1989) Time-temperature-dose rate superposition: a methodology for extrapolating accelerated radiation aging data to low-dose rate conditions. Polym Degrad Stab 24:137–16810.1016/0141-3910(89)90108-0 ↗
20. Wise J, Gillen KT, Clough RL (1995) An ultrasensitive technique for testing the Arrhenius extrapolation assumption for thermally aged elastomers. Polym Degrad Stab 49:403–41810.1016/0141-3910(95)00137-B ↗
21. Gillen KT, Celina M (2001) The wear-out approach for predicting the remaining lifetime of materials. Polym Degrad Stab 71:15–3010.1016/S0141-3910(00)00112-9 ↗
22. Ding HZ, Wang ZD (2008) On the degradation evolution equations of cellulose. Cellulose 15:205–22410.1007/s10570-007-9166-4 ↗
23. Matsuo M, Yokoyama M, Umemura K et al (2011) Aging of wood: analysis of color changes during natural aging and heat treatment. Holzforschung 65:361–36810.1515/hf.2011.040 ↗
24. Matsuo M, Umemura K, Kawai S (2014) Kinetic analysis of color changes in keyaki (Zelkova serrata) and sugi (Cryptomeria japonica) wood during heat treatment. J Wood Sci 60:12–2010.1007/s10086-013-1369-8 ↗
25. Salmén L (1984) Viscoelastic properties of in situ lignin under water-saturated conditions. J Mater Sci 19:3090–309610.1007/BF01026988 ↗
26. Nakano T (2012) Applicability condition of time-temperature superposition principle (TTSP) to a multi-phase system. Mech Time Depend Mater 17:439–44710.1007/s11043-012-9195-8 ↗
27. Goring DAI (1963) Thermal softening of lignin, hemicellulose and cellulose. Pulp Paper Mag Can 64:T517–T527
28. Takamura N (1968) Studies on hot pressing and drying process in the production of fibreboard. III. Softening of fibre components in hot pressing of fibre mat. Mokuzai Gakkaishi 14:75–79
29. Hillis WE, Rozsa AN (1978) The softening temperature of wood. Holzforschung 32:68–7310.1515/hfsg.1978.32.2.68 ↗
30. Furuta Y, Nakajima M, Nakanii E, Ohkoshi M (2010) The effects of lignin and hemicellulose on thermal-softening properties of water-swollen wood. Mokuzai Gakkaishi 56:132–138 (In Japanese)10.2488/jwrs.56.132 ↗
31. Yamamoto H, Yoshida M, Okuyama T (2002) Growth stress controls negative gravitropism in woody plant stems. Planta 216:280–29210.1007/s00425-002-0846-x ↗
32. Fourcaud T, Lac P (2003) Numerical modelling of shape regulation and growth stresses in trees I. An incremental static finite element formulation. Trees 17:23–3010.1007/s00468-002-0202-6 ↗
33. Fourcaud T, Blaise F, Lac P et al (2003) Numerical modelling of shape regulation and growth stresses in trees II. Implementation in the AMAPpara software and simulation of tree growth. Trees 17:31–3910.1007/s00468-002-0203-5 ↗
34. Olsson AM, Salmen L (1992) Chapter 9 Viscoelasticity of in situ lignin as affected by structure—softwood vs. hardwood. In: Glasser WG, Hatakeyama H (eds) ACS symposium series 489 viscoelasticity of biomaterials. ACS Publications, Washington, pp 133–14310.1021/bk-1992-0489.ch009 ↗