journal article·2016-02

Interfacial interactions between liquid Ti–Al alloys and TiB2 ceramic

L. Xi, I. Kaban, R. Nowak, G. Bruzda, N. Sobczak, J. Eckert

Journal of Materials Science· Volume 51· Issue 4
Publisher page

Abstract

High-temperature interactions of liquid Ti and Ti74.3Al25.7, Ti49.3Al50.7, Ti26.5Al73.5 and Ti3.5Al96.5 (at.%) alloys with TiB2 ceramic are studied using the sessile drop technique. Molten Ti and Ti–Al alloys show a very good wetting of TiB2. A homogeneous TiB layer with a thickness of about 20 μm forms at the Ti/TiB2 interface. An approximately 200-μm-thick layer of densely packed TiB whiskers is observed at the interface of a Ti74.3Al25.7/TiB2 couple. The Ti49.3Al50.7 liquid penetrates the grain boundaries in the TiB2 ceramic and disconnects the grains in the near-interface region. The Ti26.5Al73.5 melt does not disconnect the TiB2 grains, but penetrates the grain boundaries over a distance of about 300 μm from the interface. Ti3.5Al96.5 just fills the pores in the ceramic up to a distance of about 120 μm from the interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Boyer R, Collings EW, Welsch G (eds) Materials properties handbook: titanium alloys, vol 3. ASM, Materials Park, pp 1–55
2. Kim Y-W (1995) Gamma titanium aluminides: their status and future. JOM 47:39–4210.1007/BF03221229 ↗
3. Boyer R (1996) An overview on the use of titanium in the aerospace industry. Mater Sci Eng A 213:103–11410.1016/0921-5093(96)10233-1 ↗
4. Schutz R, Watkins H (1998) Recent developments in titanium alloy application in the energy industry. Mater Sci Eng A 243:305–31510.1016/S0921-5093(97)00819-8 ↗
5. Bartolotta PA, Krause DL (1999) Titanium aluminide applications in the high speed civil transport. NASA/TM 20907:1–9
6. Tetsui T (1999) Gamma Ti aluminides for non-aerospace applications. Curr Opin Solid State Mater Sci 4:243–24810.1016/S1359-0286(99)00023-6 ↗
7. Schafrik RE (2001) A perspective on intermetallic commercialization for aero-turbine applications. In: Hemker KJ, Dimiduk DM, Clemens H, Darolia R, Inui H, Larsen JM, Sikka VK, Thomas M, Whittenberger JD (eds) Structural intermetallics, proceedings of the 3rd international symposium on structural intermetallics, pp 13–17
8. Djanarthany S, Viala JC, Bouix J (2001) An overview of monolithic titanium aluminides based on Ti3Al and TiAl. Mater Chem Phys 72:301–31910.1016/S0254-0584(01)00328-5 ↗
9. Thomas M, Thomas M (2011) Processing and characterization of TiAl-based alloys: towards an industrial scale. J Aerosp Lab 3:1–11
10. Chandley D (2000) Use of gamma titanium aluminide for automotive engine valves. Met Sci Technol 18:8–11
11. Leyens C, Peters M (eds) (2003) Titanium and titanium alloys: fundamentals and applications. Wiley, Weinheim
12. Cherukuri B, Srinivasan R, Tamirisakandala S, Miracle DB (2009) The influence of trace boron addition on grain growth kinetics of the beta phase in the beta titanium alloy Ti–15Mo–2.6Nb–3Al–0.2Si. Scr Mater 60:496–49910.1016/j.scriptamat.2008.11.040 ↗
13. Kim YW (1999) Ordered intermetallic alloys, part III: gamma-titanium aluminides. JOM 46:30–3910.1007/BF03220745 ↗
14. Froes FH, Suryanarayana C, Eliezer D (1992) Synthesis, properties and applications of titanium aluminides. J Mater Sci 27:5113–5140. doi: 10.1007/BF0240380610.1007/BF02403806 ↗
15. Doychak J (1992) Metal-and intermetallic-matrix composites for aerospace propulsion and power systems. JOM 44:46–5110.1007/BF03222256 ↗
16. Ward-Close C, Minor R, Doorbar P (1996) Intermetallic-matrix composites—a review. Intermetallics 4:217–22910.1016/0966-9795(95)00037-2 ↗
17. Brennan PC, Kao WH, Yang JM (1992) The mechanical properties of an Al2O2/Ni3Al particulate-reinforced composite. Mater Sci Eng A 153:635–64010.1016/0921-5093(92)90263-Z ↗
18. Schumacher P, Greer A, Worth J, Evans P, Kearns M, Fisher P et al (1998) New studies of nucleation mechanisms in aluminium alloys: implications for grain refinement practice. Mater Sci Technol 14:394–40410.1179/mst.1998.14.5.394 ↗
19. Greer A, Bunn A, Tronche A, Evans P, Bristow D (2000) Modelling of inoculation of metallic melts: application to grain refinement of aluminium by Al–Ti–B. Acta Mater 48:2823–283510.1016/S1359-6454(00)00094-X ↗
20. Quested T, Greer A (2004) The effect of the size distribution of inoculant particles on as-cast grain size in aluminium alloys. Acta Mater 52:3859–386810.1016/j.actamat.2004.04.035 ↗
21. Kartavykh A, Gorshenkov M, Tcherdyntsev V, Podgorny D (2014) On the state of boride precipitates in grain refined TiAl-based alloys with high Nb content. J Alloys Compds 586:S153–S15810.1016/j.jallcom.2013.03.104 ↗
22. Gosslar D, Günther R, Hecht U, Hartig C, Bormann R (2010) Grain refinement of TiAl-based alloys: the role of TiB2 crystallography and growth. Acta Mater 58:6744–675110.1016/j.actamat.2010.08.040 ↗
23. Sahay SS, Ravichandran KS, Atri R, Chen B, Rubin J (1999) Evolution of microstructure and phases in in-situ processed Ti–TiB composites containing high volume fractions of TiB whiskers. J Mater Res 14:4214–422310.1557/JMR.1999.0571 ↗
24. Nandwana P (2013) Titanium boride formation and its subsequent influence on morphology and crystallography of alpha precipitates in titanium alloys. Ph.D. thesis, University of North Texas
25. Lu L, Lai MO, Wang HY (2000) Synthesis of titanium diboride TiB2 and Ti-Al-B metal matrix composites. J Mater Sci 35:241–248. doi: 10.1023/A:100478991027910.1023/A:1004789910279 ↗
26. Lee TW, Lee CH (1999) Microstructure and mechanical properties of TiB2/TiAl composites produced by reactive sintering using a powder extrusion technique. J Mater Sci Lett 18:801–80310.1023/A:1006645302032 ↗
27. Thadhani NN, Chawla N, Kibbe W (1991) Explosive shock-compression processing of titanium aluminide/titanium diboride composites. J Mater Sci 26:232–240. doi: 10.1007/BF0057605710.1007/BF00576057 ↗
28. Liu A, Li B, Nan H, Sui Y, Guo J, Fu H (2008) Interaction between γ-TiAl alloy and zirconia. Res Dev 5:44–4610.1080/15427600701853798 ↗
29. Jia Q, Cui Y, Yang R (2004) Intensified interfacial reactions between gamma titanium aluminide and CaO stabilised ZrO2. Int J Cast Met Res 17:23–2810.1179/136404604225014800 ↗
30. Li BS, Liu AH, Hai N, Bi WS, Guo JJ, Fu HZ (2008) Wettability of TiAl alloy melt on ceramic moulds in electromagnetic field. Trans Nonferrous Met Soc China 18:518–52210.1016/S1003-6326(08)60091-6 ↗
31. Sobczak N (2005) Effects of titanium on wettability and interfaces in aluminium/ceramic systems. In: Ewsuk K, Nogi K, Reiterer M, Tomsia A, Jill Glass S, Waesche R, Uematsu K, Naito M (eds) Characterization & control of interfaces for high quality advanced materials, vol 146. Wiley, Hoboken, pp 83–91
32. Walther GC Jr (1976) Kinetics of TiB formation. PhD thesis, University of Florida, USA10.1007/978-1-4684-2340-2_29 ↗
33. Sobczak N, Nowak R, Radziwill W, Budzioch J, Glenz A (2008) Experimental complex for investigations of high temperature capillarity phenomena. Mater Sci Eng A 495:43–4910.1016/j.msea.2007.11.094 ↗
34. Xi L, Kaban I, Nowak R, Korpała B, Bruzda G, Sobczak N, Mattern N, Eckert J (2015) High-temperature wetting and interfacial interaction between liquid Al and TiB2 ceramic. J Mater Sci 50:2682–2690. doi: 10.1007/s10853-015-8814-610.1007/s10853-015-8814-6 ↗
35. Plevachuk Yu, Egry I, Brillo J, Holland-Moritz D, Kaban I (2007) Density and atomic volume in liquid Al-Fe and Al-Ni binary alloys. Int J Mat Res 98:107–11110.3139/146.101447 ↗
36. Witusiewicz VT, Bondar AA, Hecht U, Rex S, Tya Velikanova (2008) The Al-B-Nb-Ti system III. Thermodynamic re-evaluation of the constituent binary system Al-Ti. J Alloys Compds 465:64–7710.1016/j.jallcom.2007.10.061 ↗
37. Cardarelli F (2000) Materials handbook: a concise desktop reference. Springer, London10.1007/978-1-4471-3648-4 ↗
38. Sobczak N, Nowak N, Passerone A, Valenza F, Muolo ML, Jaworska L, Barberis F, Capurro M (2010) Wetting and joining of HfB2 and Ta with Ni. Trans Foundry Res Inst 2:5–14
39. Murray JL, Liao PK, Spear KE (1986) The B-Ti (boron-titanium) system. Bull Alloy Phase Diagr 7:550–55510.1007/BF02869864 ↗
40. Witusiewicz VT, Bondar AA, Hecht U, Rex S, Tya Velikanova (2008) The Al–B–Nb–Ti system I. Re-assessment of the constituent binary systems B-Nb and B–Ti on the basis of new experimental data. J Alloys Compds 448:185–19410.1016/j.jallcom.2006.10.034 ↗
41. Cacciamani G, Riani P, Valenza F (2011) Equilibrium between MB2 (M = Ti, Zr, Hf) UHTC and Ni: a thermodynamic database for the B-Hf–Ni–Ti–Zr system. Calphad 35:601–61910.1016/j.calphad.2011.10.003 ↗
42. Fan Z, Guo Z, Cantor B (1997) The kinetics and mechanism of interfacial reaction in sigma fibre-reinforced Ti MMCs. Composites Part A. Appl Sci Manuf 28:131–14010.1016/S1359-835X(96)00105-4 ↗
43. Panda K, Ravi Chandran KS (2003) Synthesis of ductile titanium-titanium boride (Ti-TiB) composites with a beta-titanium matrix: the nature of TiB formation and composite properties. Met Mater Trans A 34:1371–138510.1007/s11661-003-0249-z ↗
44. Attar H, Bönisch M, Calin M, Zhang L, Zhuravleva K, Funk A, Scudino S, Yang C, Eckert J (2014) Comparative study of microstructures and mechanical properties of in situ Ti–TiB composites produced by selective laser melting, powder metallurgy, and casting technologies. J Mater Res 29:1941–195010.1557/jmr.2014.122 ↗
45. Feng HB, Jia DC, Zhou Y, Huo J (2004) Microstructural characterisation of in situ TiB/Ti matrix composites prepared by mechanical alloying and hot pressing. Mater Sci Technol 20:1205–121010.1179/026708304225012198 ↗
46. Devyatkin SV, Kaptay G (2000) Chemical and electrochemical behavior of titanium diboride in cryolite-alumina melt and in molten aluminum. J Solid State Chem 154:107–10910.1006/jssc.2000.8819 ↗
47. Sobczak N, Astana R, Radziwill W, Nowak R, Kudyba A (2007) The role of aluminum oxidation in the wetting-bonding relationship of Al/oxide couples. Arch Metal Mater 52:55–65
48. Sobczak N, Ksiazek M, Radziwill W, Asthana R, Mikulowski B (2004) The effect of temperature, matrix alloying and substrate coatings on wettability and shear strength of Al/Al2O3 couples. Met Mater Trans A 35:911–92310.1007/s11661-004-0016-9 ↗
49. Sobczak N, Asthana R (2004) The role of interfacial phenomena in wetting-bonding relationship in Al/ceramic couples. In: Weil KS, Reimanis IE, Lewinsohn CA (eds). Surfaces, interfaces and science of ceramic joining. Ceram Trans 158:3–18
50. Wu A (2008) Ceramic/metal bonding. In: Zhou Y (ed) Microjoining and nanojoining. Woodhead Publishing, Cambridge, pp 758–78510.1533/9781845694043.3.758 ↗
51. Cazajus V, Seguy S, Welemane H, Karama M (2011) Residual stresses in a ceramic-metal composite. Appl Mech Mater 146:185–19610.4028/www.scientific.net/AMM.146.185 ↗
52. Titanium alloy guide. RMI Titanium Company, An RTI International Metals, Inc. Company. Niles, OH, USA, 2000. www.rtiintl.com/Titanium/RTI-Titanium-Alloy-Guide.pdf . Accessed Oct 2015
53. Ceramics GmbH ESK, Co KG (2007) Titanium diboride technical data. Kempten, Germany
54. Schafrik RE (1977) Dynamic elastic moduli of the titanium aluminides. Metal Mater Trans A8:1003–100610.1007/BF02661586 ↗
55. Li Z, Gao W (2007) High temperature corrosion of intermetallics. In: Berdovsky YN (ed) Intermetallics research progress. Nova Science Publishers Inc., New York, pp 1–64
56. Frazier WE, Koczak MJ (1988) Ambient temperature properties of PM aluminum-titanium alloys. Report No. 88067-60, Naval Air Development Center, Warminster, PA, USA
57. NPCS Board of Consultants & Engineers (2007) The complete technology book on aluminium and aluminium products. Asia Pacific Business Press Inc., Delhi, p 672
58. Bauccio M (ed) (1994) ASM engineered materials reference book, 2nd edn. ASM International, Materials Park