Modeling of thermal barrier coating temperature due to transmissive radiative heating
Source abstract
Abstract
Thermal barrier coatings are generally designed to possess very low thermal conductivity to reduce the conduction heat transfer from the coating surface to the metal turbine blade beneath the coating. In high-temperature power generation systems, however, a considerable amount of radiative heat is produced during the combustion of fuels. This radiative heat can propagate through the coating and heat up the metal blade, and thereby reduce the effectiveness of the coating in lowering the thermal load on the blade. Therefore, radiative properties are essential parameters to design radiative barrier coatings. This article presents a combined radiation and conduction heat transfer model for the steady-state temperature distribution in semitransparent yttria-stabilized zirconia (YSZ) coatings. The results of the model show a temperature reduction up to 45 K for YSZ of high reflectance (80%) compared to the YSZ of low reflectance (20%). The reflectivities of YSZ and metal blade affect the temperature distribution significantly. Additionally, the absorption and scattering coefficients of YSZ, the thickness of the coating, and the thermal conductivities of YSZ and metal blade affect the temperature distribution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Radiative Heat Transfer Studies · Gas Dynamics and Kinetic Theory · Combustion and flame dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Klemens PG (1993) Thermochim Acta 28:24710.1016/0040-6031(93)80426-B ↗
2. Klemens PG, Gell M (1998) Mater Sci Eng A 245:14310.1016/S0921-5093(97)00846-0 ↗
3. Singh J, Wolfe DE (2005) J Mater Sci 40:1. doi: https://doi.org/10.1007/s10853-005-5682-510.1007/s10853-005-5682-5 ↗
4. Trice RW, Jennifer Su Y, Mawdsley JR, Faber KT, De Arellano-Lopez AR, Wang H, Porter WD (2002) J Mater Sci 37:2359. doi: https://doi.org/10.1023/A:101531050952010.1023/A:1015310509520 ↗
5. Eldridge JI, Spuckler CM, Street KW, Markham JR (2002) Ceram Eng Sci Proc 23:41710.1002/9780470294758.ch47 ↗
6. Kelly MJ, Wolfe DE, Singh J, Eldridge JI, Zhu DM, Miller R (2006) Int J Appl Ceram Technol 3:8110.1111/j.1744-7402.2006.02073.x ↗
7. Wang D, Huang X, Patnaik P (2006) J Mater Sci 41:6245. doi: https://doi.org/10.1007/s10853-006-0494-910.1007/s10853-006-0494-9 ↗
8. Siegel R, Spuckler CM (1998) Mater Sci Eng A 245:15010.1016/S0921-5093(97)00845-9 ↗
9. Viskanta R, Kim DM (1980) J Heat Transf 102:18210.1115/1.3244237 ↗
10. Mahapatra SK, Nanda P, Sarkar A (2005) Heat Mass Transf 41:89010.1007/s00231-004-0587-4 ↗
11. Spuckler CM, Siegel R (1994) J Thermophys Heat Transf 8(2):19310.2514/3.523 ↗
12. Bennet TD (2003) Int J Heat Mass Transf 46:234110.1016/S0017-9310(02)00535-5 ↗
13. Sadooghi P (2005) J Quant Spectrosc Radiat Transf 92:40310.1016/j.jqsrt.2004.08.010 ↗
14. Wellele O, Orlande HRB, Ruperti JN, Colaco MJ, Delmas A (2006) J Phys Chem Solids 67:223010.1016/j.jpcs.2006.06.007 ↗
15. Demange D, Bejet M (2004) Aerosp Sci Technol 8:32110.1016/j.ast.2004.01.002 ↗
16. Siegel R, Howell JR (1992) Thermal radiation heat transfer, 3rd edn. Taylor & Francis, New York
17. Viskanta R, Menguc MP (1987) Prog Energy Combust Sci 13:9710.1016/0360-1285(87)90008-6 ↗
18. Eldridge JI, Spuckler CM, Martin RE (2006) Int J Ceram Technol 3(2):9410.1111/j.1744-7402.2006.02067.x ↗
19. Kingery WD (1976) Introduction to ceramics, 1st edn. Wiley, New York