journal article·2011-03

Influence of solution rate and substrate temperature on the properties of lead iodide films deposited by spray pyrolysis

J. F. Condeles, M. Mulato

Journal of Materials Science· Volume 46· Issue 5
Publisher page

Abstract

Polycrystalline lead iodide (PbI2) thin films have been deposited by spray pyrolysis method using N,N-dimethylformamide (DMF) as solvent as a function of several deposition parameters. DMF is used as an alternative to water due to the larger solubility limit of PbI2 in this solvent. In this work, the solution rate during the deposition time of 3 h was varied in the range of 0.11 cm3/min up to 0.30 cm3/min. A growth rate varying from 19 A s−1 up to 47 A s−1 was obtained as a function of solution rate. Dark current as a function of temperature for the final films reveals that for larger solution rates smaller values of electrical resistivity is obtained. For a solution rate of 0.30 cm3/min, an electrical transport activation energy (E a) of about 0.65 eV was measured for the whole temperature range. On the other hand, for the sample deposited with a solution rate of 0.11 cm3/min, two main transport mechanisms can be observed with an activation energy of about 1.23 eV for temperatures above 50 °C. The effect of substrate temperature is also discussed. Samples were deposited in the temperature range of 170 °C up to 250 °C with a fixed solution rate of 0.16 cm3/min. In addition, the films were exposed to X-ray irradiation in the mammography diagnosis region, using a molybdenum (Mo) anode and a peak tube potential between 26 and 36 kV (equivalent photon energies between 10 keV and 15 keV).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Semiconductor Detectors and Materials · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Street RA, Ready SE, Schuylenbergh KV, Ho J, Boyce JB, Nylen P, Shah K, Melekhov L, Hermon H (2002) J Appl Phys 91:334510.1063/1.1436298 ↗
2. Condeles JF, Ghilardi Netto T, Mulato M (2007) Nucl Instrum Methods A 577:72410.1016/j.nima.2007.04.139 ↗
3. Kasap SO, Rowlands JA (2002) IEE Proc Circuits Devices Syst 149(2):8510.1049/ip-cds:20020350 ↗
4. Bennett PR, Shah KS, Dmitriev Y, Klugerman M, Gupta T, Squillante M, Street R, Partain L, Zentai G, Pavyluchova R (2003) Nucl Instrum Methods A 505:26910.1016/S0168-9002(03)01066-0 ↗
5. Lemmi F, Mulato M, Ho J, Lao R, Lu JP, Street RA, Palma F (2001) Appl Phys Lett 78(10):133410.1063/1.1350592 ↗
6. Shah KS, Street RA, Dmitriyev Y, Bennett P, Cirignano L, Klugerman M, Squillante MR, Entine G (2001) Nucl Instrum Methods A 458:14010.1016/S0168-9002(00)00857-3 ↗
7. Condeles JF, Lofrano RCZ, Rosolen JM, Mulato M (2006) Braz J Phys 36(2A):32010.1590/S0103-97332006000300023 ↗
8. Ahuja R, Arwin H, Ferreira da Silva A, Persson C, Osório-Guillén JM, Souza de Almeida J, Moyses Araujo C, Veje E, Veissid N, An CY, Pepe I, Johansson B (2002) J Appl Phys 92:721910.1063/1.1523145 ↗
9. Schieber M, Hermon H, Zuck A, Vilensky A, Melekhov L, Shatunovsky R, Meerson E, Saado Y, Lukach M, Pinkhasy E, Ready SE, Street RA (2001) J Cryst Growth 225:11810.1016/S0022-0248(01)00832-6 ↗
10. Dmitriev Y, Bennett PR, Cirignano LJ, Klugerman M, Shah KS (2008) Nucl Instrum Method A 584:16510.1016/j.nima.2007.10.008 ↗
11. Schieber M, Zamoshchik N, Khakhan O, Zuck A (2008) J Cryst Growth 310:316810.1016/j.jcrysgro.2008.02.030 ↗
12. Fornaro L, Saucedo E, Mussio L, Gancharov A (2002) IEEE Trans Nucl Sci 49:227410.1109/TNS.2002.803689 ↗
13. Ponpon JP, Amann M (2001) Thin Solid Films 394:27710.1016/S0040-6090(01)01151-8 ↗
14. Condeles JF, Martins TM, Dos Santos TC, Brunello CA, Rosolen JM, Mulato M (2004) J Non-Cryst Solids 338–340:8110.1016/j.jnoncrysol.2004.02.026 ↗
15. McGregor DS, Hermon H (1997) Nucl Instrum Methods A 395:10110.1016/S0168-9002(97)00620-7 ↗
16. Hayashi T, Kinpara M, Wang JF, Mimura K, Isshiki M (2008) Cryst Res Technol 43(1):910.1002/crat.200711051 ↗
17. He Y, Zhu S, Zhao B, Jin Y, He Z, Chen B (2007) J Cryst Growth 300:44810.1016/j.jcrysgro.2006.10.226 ↗
18. Condeles JF, Ando RA, Mulato M (2008) J Mater Sci 43:525. doi: 10.1007/s10853-007-1854-910.1007/s10853-007-1854-9 ↗
19. Unagami TJ (1999) Electrochem Soc 146:311010.1149/1.1392439 ↗
20. Perednis D, Gauckler LJ (2005) J Electroceram 14:10310.1007/s10832-005-0870-x ↗
21. Siefert W (1984) Thin Solid Films 120(4):26710.1016/0040-6090(84)90241-4 ↗
22. Yu HF, Liao WH (1998) Int J Heat Mass Transf 41(8–9):993
23. Ul Islam AKMF, Islam R, Khan KA (2005) Renew Energy 30:228910.1016/j.renene.2005.02.010 ↗
24. Fornaro L, Saucedo E, Mussio L, Yerman L, Ma X, Burger A (2001) Nucl Instrum Methods A 458:40610.1016/S0168-9002(00)00933-5 ↗
25. Li HY, Zhang H, Li ZS, Li DM, He DY (2005) J Inorg Mater 20(5):1239
26. Matuchova M, Zdansky K, Svatuska M, Zavadil J, Prochazkova O (2007) Chem Pap 61(1):3610.2478/s11696-006-0092-y ↗
27. Oliveira IB, Costa FE, Armelin MJ, Cardoso LP, Hamada MM (2002) IEEE Trans Nucl Sci 49(4):196810.1109/TNS.2002.801483 ↗
28. Matuchova M, Zdansky K, Zavadil J, Maixner J, Alexiev D, Prochazkova D (2006) Mater Sci Semicond Process 9:39410.1016/j.mssp.2006.01.081 ↗