Transformation of poly(dimethylsiloxane) into thin surface films of SiOx by UV/ozone treatment. Part II: segregation and modification of doped polymer blends
Source abstract
Abstract
UV/ozone treatment of organic polymers having silicone additives to produce oxidized layers was achieved by doping a host polymer or prepolymer with a silicone additive, poly(dimethylsiloxane) (PDMS). The concentration of PDMS in the host polymer was low, typically in the range of 0.1–2.0% by weight. Host polymers were polyethylene, polyimide, and polyurethane. After film formation, the presence of PDMS was detected on the surface using X-ray photoelectron spectroscopy (XPS), consistent with wetting angle measurements that revealed a hydrophobic surface. The doped blend was then subjected to exposure in a UV/ozone environment such that a thin, stable barrier of SiO x was formed at the surface of the film. Rate of film modification was monitored by XPS and measurement of advancing contact angle using deionized water. XPS measurements also showed some evidence of modified fragments of the host polymer near the surface. Significant segregation of PDMS and subsequent transformation to silicon oxides has been demonstrated to occur in the
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Surface Modification and Superhydrophobicity · Silicone and Siloxane Chemistry · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Brody AL (2003) Food Technol 57:75
2. Matienzo LJ, Winnacker SK (2002) Macromol Mater Eng 287:87110.1002/mame.200290022 ↗
3. Egitto FD, Matienzo LJ, Morrison BO Jr (1997) US Patent 5:693–928
4. Wang F (1998) Doctoral Dissertation. Virginia Polytechnic Institute, Blacksburg, VA, USA
5. Arkles B, Janeiro B, Berry DH, Ezbiansky KA, Composto R (2000) In: Proceedings of silicones in coatings III, Barcelona, Spain, 28–30 March, 2000, (The Paint Research Association, Teddington Middlesex, UK, p 1
6. Egitto FD, Matienzo LJ, Spalik JM, Fuerniss SJ (1995) In Proceedings of the MRS spring meeting: polymer/inorganic interfaces II, 385. MRS, San Francisco, CA, USA, pp 245
7. Seyferth D (1990) Adv Chem Ser 224:56510.1021/ba-1990-0224.ch031 ↗
8. Arkles B, Berry DH, Figge LK, Composto RJ, Chiou T, Colazzo H, Wallace WE (1997) J Sol--Gel Sci Technol 8:465
9. Pan Q, Gonzalez GB, Composto RJ, Wallace WE, Arkles B, Figge LK, Berry DH (1999) Thin Solid Films 345:24410.1016/S0040-6090(98)01740-4 ↗
10. Ghate PB (1982) In: Bunshah RF (ed) Deposition technologies for films and coatings. Noyes Publications, Park Ridge, NJ, USA
11. Kurosawa K, Maezono Y, Miyano J, Motoyama Y, Yokotani A (2001) J Phys 11:739
12. Pecheur A, Autran JL, Lazarri JP, Piners P (1999) J Non-Cryst Solids 245:2010.1016/S0022-3093(98)00868-0 ↗
13. Hitchman ML, Alexandrov SE (2001) Electrochem Soc Interface 10(2):4010.1149/2.F07012IF ↗
14. Li J, Mayer JW, Matienzo LJ, Emmi F (1992) Mater Chem Phys 32:39010.1016/0254-0584(92)90186-C ↗
15. Kalachev AA, Mathauer K, Hohne U, Mohwald H, Wegner G (1993) Thin Solid films 228:30710.1016/0040-6090(93)90623-W ↗
16. Mirley CL, Koberstein JT (1995) Langmuir 11:104910.1021/la00004a001 ↗
17. Egitto FD, Matienzo LJ J Mater Sci, this issue
18. Li L, Chan C-M, Liu S, An L, Ng K-M, Weng L-T, Ho K-C (2000) Macromolecules 33:800210.1021/ma991445e ↗
19. Kovacs GJ, Vincent PS, Tremblay C, Dundsack L (1983) Thin Solids Films 101:10110.1016/0040-6090(83)90490-X ↗
20. Kovacs GJ, Vincent PS (1984) Thin Solids Films 111:6510.1016/0040-6090(84)90350-X ↗
21. Billmeyer FW Jr (1971) Textbook of Polymer Science, 2edn. John Wiley and Sons, Inc., New York, p 41
22. Barton AFM (1983) Handbook of solubility parameters and other cohesion parameters. CRC Press, Inc., Boca Raton, FL
23. Wu S (1999) In: Brandrup J, Immergut EH, Grulke EA (eds) Polymer handbook, 4th edn. John Wiley and Sons, Inc., NewYork
24. The Sabreen Group, Inc., Plano, TX, USA, Plastics Technical Reference Library, www.sabreen.com/index (2001)
25. Egitto FD, Vukanovic V, Taylor GN (1990) In: Agostino RD’ (ed) Plasma deposition, treatment, and etching of polymers, Academic Press, Inc., San Diego, CA, pp 321–422, and references therein10.1016/B978-0-12-200430-8.50011-7 ↗
26. Egitto FD, Matienzo LJ (1994) IBM J Res Develop 38(4):42310.1147/rd.384.0423 ↗
27. Roberts ED (1973) J Electrochem Soc 120:171610.1149/1.2403351 ↗
28. Feneberg P, Krekeler U (1976) US Patent 3:959
29. Owen MJ, Smith PJ (1994) J Adhes Sci Technol 8(10):106310.1163/156856194X00942 ↗
30. Taylor GN, Wolf TM, private communication
31. Sharma J, Berry DH, Composto RJ, Dai H-L (1999) J Mater Res 14:99010.1557/JMR.1999.0132 ↗
32. Gaynes MA, Morrison BO, Egitto FD, Matienzo LJ, unpublished results
33. Egitto FD, Emmi F, Horwath RS, Vukanovic V (1985) J Vac Sci Technol B 3:89310.1116/1.583078 ↗
34. Matienzo LJ, Unertl WN (1996) In: Gosh MK, Mittal KL (eds) Polyimides: fundamentals and applications. Marcel-Dekker, New York, p 659
35. Egitto FD, Matienzo LJ (1996) In: Gosh MK, Mittal KL (eds) Polyimides: fundamentals and applications. Marcel-Dekker, New York, p 419
36. Moulder JF, Stickle WF, Sobol PF, Bomben KD (1992) Handbook of X-ray photoelectron spectroscopy. Perkin-Elmer Corporation, Eden Prairie, MN, USA
37. Beamson G, Briggs D (1992) High resolution XPS of organic polymers: the scienta ESCA300 database. John Wiley & Sons, Chichester, UK p 211
38. Niwano M, Suemitsu M, Ishibashi Y, Takeda Y, Miyamoto N, Honma K (1992) J Vac Sci Technol A 10:317110.1116/1.577838 ↗
39. Niwano M, Kageyama J, Kinashi K, Miyamoto N, Honma K (1992) J Vac Sci Technol A 12(2):46510.1116/1.579264 ↗
40. Tanuma S, Powell CJ, Penn DR (1994) Surf Interface Anal 21:16510.1002/sia.740210302 ↗
41. Yang XF, Vang C, Tallman DE, Bierwagen GP, Croll SG, Rohlik S (2001) Polym Degrad Stab 74:34110.1016/S0141-3910(01)00166-5 ↗
42. Wells ER (1974) In: Martens CR (ed) Technology of paints, varnishes and laquers. Robert E. Krieger Publishing Company, New York, p 210
43. U.S. Coast Guard, Department of Transportation (1985) CHRIS (Chemical Hazards Response Information System) hazardous chemical data, vol 2. U.S. Coast Guard, Washington, D.C. Volume 2
44. Solomon DH (1967) The chemistry of organic film formers. John Wiley & Sons, Inc., New York
45. Joubert O, Hollinger G, Fiori C, Devine R, Panier P, Pantel RJ (1991) Appl Phys 69(9):664710.1063/1.348880 ↗
46. Partridge RH (1966) J Chem Phys 45:168510.1063/1.1727815 ↗
47. Cain SR, Egitto FD, Emmi F (1987) J Vac Sci Technol 5(4):157810.1116/1.574568 ↗
48. Taylor GN, Wolf TM (1979) In: Proceedings of the Reg. Tech. Conf. on Photopolymers, Ellenville, NY, USA (Mid-Hudson Sect., Soc. Plast. Eng., 1979) p 175
49. Egitto FD, Matienzo LJ (2003) US Patent 6:656
50. Flack WW, Kulas S, Franklin C (2001) In: Progler CJ (ed) Proceedings of SPIE conference on optical microlithography XIV, vol 4346. SPIE, Bellingham, WA, p 94510.1117/12.435795 ↗
51. Park HB, Han DW, Lee YM (2003) Chem Mater 15(12):234610.1021/cm030016z ↗
52. Matienzo LJ, Egitto FD (2006) J Mater Sci, accepted for publication