journal article·2005-06

Low temperature process for the synthesis of rutile phase titania through vapor phase hydrolysis

A. K. John, G. D. Surender

Journal of Materials Science· Volume 40· Issue 11
Publisher page

Abstract

The synthesis of titania nanoparticles through vapor phase reactions in an aerosol reactor is a classical example of the use of aerosol processes in material synthesis applications. Recently [1, 3], there has been a growing interest in hydrolysis based aerosol synthesis routes due to the much lower temperature requirements and the absence of a need for high purity oxygen. The precursor needed for the hydrolysis reaction could either be alkoxides [4] or chlorides [1]. The chlorides however have an advantage due to their much lower cost and ready availability. As an independent preparation route, Bin Xia et al., [1, 2] conducted experiments based on vapor phase hydrolysis of TiCl4 in a vertical furnace to synthesize anatase phase titanium dioxide below 873 K and calcined above 1073 K to obtain rutile phase titania particles. The major finding reported in this paper is the use of amorphous titanium oxide precursors generated during vapor phase hydrolysis with ethanol as a dopant for conversion to rutile phase titanium dioxide at the lowest transformation temperature reported so far. The addition of organic dopant reduces the amorphous to rutile phase conversion temperatures to as low as 423 K (150 ◦C). This finding has been patented recently [5]. The hydrolysis reaction takes place in an aerosol reactor of ID 2.5 cm and 1.5 m in length, heated externally in a horizontal electric furnace (Fig. 1). The reactor inlet is composed of three concentric metallic tubes made of inconel through which the reactants (TiCl4, H2O, and the dopant) are introduced as vapor. The hot wall temperature of the reactor is maintained such that the reactant gas stream is heated from a temperature in the range 343–353 K at the inlet of the reactor to a temperature not exceeding 373 K at the exit of the reactor for obtaining amorphous titanium dioxide particles. The amorphous phase titanium dioxide particles are then converted to titanium dioxide particles having the rutile phase through calcination at temperatures as low as 423 K. A possible mechanism based on hydrolysis reaction and the formation of oxo bridges is proposed for the production of titanium dioxide by vapor phase hydrolysis of titanium tetra chloride as follows:
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalytic Processes in Materials Science · TiO2 Photocatalysis and Solar Cells · Zeolite Catalysis and Synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. BIN XIA, WEIBIN LI, BIN ZHANG and YUCHANG XIE, J. Mater. Sci. 34 (1999) 3505.10.1023/A:1004666106670 ↗
2. BIN XIA, H. HUANG and Y. XIE, Mater. Sci. Eng. B57 (1999) 150.
3. M. RIGO, P. CANU, L. ANGELIN and G. DE VALLE, Ind. Eng. Chem. Res. 37 (1998) 1189.10.1021/ie970625e ↗
4. F. RUBIO, J. RUBIO, P. DURAN and J. L. OTEO, J. Mater. Sci. 34 (1999) 3397.10.1023/A:1004685216239 ↗
5. G. D. SURENDER, ANI K. JOHN, K. RAJENDRA PRASAD and S. SAVITHRI, W. O. Int. Pat. No. ICT/00429 dt 31/12/2003.
6. Z. C. MICHAEL, E. A. PAYZANT and C. H. BYERS, J. Coll. Interf. Sci. 222 (2000) 20.10.1006/jcis.1999.6610 ↗
7. H. K. PARK, D. K. KIM and C. H. KIM, J. Am. Ceram. Soc. 80(3) (1997) 743.10.1111/j.1151-2916.1997.tb02891.x ↗
8. SONG KI CHANG and SOTIRIS E. PRATSINIS, J. Coll. Interf. Sci. 231 (2000) 289.10.1006/jcis.2000.7147 ↗
9. K. YANAGISAWA and J. OVENSTONE, J. Phys. Chem. B 103 (1999) 7781.10.1021/jp990521c ↗