journal article·2008-09

Finite element analysis of deep indentation by a spherical indenter

Yuebin Charles Lu, Siva N. V. R. K. Kurapati, Fuqian Yang

Journal of Materials Science· Volume 43· Issue 18
Publisher page

Abstract

Using the finite element analysis, the deep indentation of strain-hardening elastoplastic materials by a rigid, spherical indenter has been studied. The simulation results clearly show that the ratio of the indentation load to the maximum indentation depth increases with the increase of the strain-hardening index and reaches a maximum value at the maximum indentation depth being about 10% of the indenter radius. The power law relation between the indentation load and the indentation depth for shallow indentation becomes invalid for deep indentation. However, the ratio of the plastic energy to the total mechanical work is a linear function of the ratio of the residual indentation depth to the maximum indentation depth, independent of the strain-hardening index and the indentation depth.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced Surface Polishing Techniques · Force Microscopy Techniques and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Hertz H (1882) J Reine Angew Math 92:15610.1515/crll.1882.92.156 ↗
2. Love AEH (1939) Q J Math 10:161. doi:https://doi.org/10.1093/qmath/os-10.1.16110.1093/qmath/os-10.1.161 ↗
3. Love AEH (1944) A treatise on the mathematical theory of elasticity, 4th edn. Dover, New York
4. Harding JW, Sneddon IN (1945) Proc Camb Philos Soc 41:1610.1017/S0305004100022325 ↗
5. Mindlin RD, Deresiewicz H (1953) J Appl Mech Trans ASME 20:32710.1115/1.4010702 ↗
6. Yang FQ (2003) Mater Sci Eng A 358:226. doi:https://doi.org/10.1016/S0921-5093(03)00289-210.1016/S0921-5093(03)00289-2 ↗
7. Yang FQ (1998) Mech Mater 30:275. doi:https://doi.org/10.1016/S0167-6636(98)00035-010.1016/S0167-6636(98)00035-0 ↗
8. Shih CW, Yang M, Li JCM (1991) J Mater Res 6:2623. doi:https://doi.org/10.1557/JMR.1991.262310.1557/JMR.1991.2623 ↗
9. Montmitonnet P, Edlinger ML, Felder E (1993) J Tribol Trans ASME 115:10. doi:https://doi.org/10.1115/1.292096210.1115/1.2920962 ↗
10. Sadeghipour K, Chen W, Baran G (1994) J Phys D Appl Phys 27:1300. doi:https://doi.org/10.1088/0022-3727/27/6/03010.1088/0022-3727/27/6/030 ↗
11. Shu JY, Fleck NA (1998) Int J Solids Struct 35:1363. doi:https://doi.org/10.1016/S0020-7683(97)00112-110.1016/S0020-7683(97)00112-1 ↗
12. Taljat B, Zacharia T, Kosel F (1998) Int J Solids Struct 35:4411. doi:https://doi.org/10.1016/S0020-7683(97)00249-710.1016/S0020-7683(97)00249-7 ↗
13. Yang FQ (1998) Int J Mech Sci 40:87. doi:https://doi.org/10.1016/S0020-7403(97)00035-010.1016/S0020-7403(97)00035-0 ↗
14. Yang FQ, Li JCM (1995) Mater Sci Eng A 201:50. doi:https://doi.org/10.1016/0921-5093(95)09763-510.1016/0921-5093(95)09763-5 ↗
15. Yang FQ, Saran A (2006) J Mater Sci Lett 41:6077
16. Ni WY, Chen YT, Cheng CM, Grummon DS (2004) J Mater Res 19:149. doi:https://doi.org/10.1557/jmr.2004.19.1.14910.1557/jmr.2004.19.1.149 ↗
17. Dieter GE (1988) Mechanical metallurgy. McGraw Hill, New York
18. Cheng YT, Li ZY, Cheng CM (2002) Philos Mag A 82:182110.1080/01418610208235693 ↗