journal article·2003-10

Experimental prediction of deformation mechanism after continuous dynamic recrystallization in superplastic P/M7475

T. Hirata, T. Mukai, N. Saito, S. Tanabe, M. Kohzu, K. Higashi

Journal of Materials Science· Volume 38· Issue 19
Publisher page

Abstract

The deformation mechanism in high-strain-rate superplastic P/M7475 before and after continuous dynamic recrystallization (CDRX) was investigated. The recrystallization process in P/M7475 differed from that in conventional superplastic material, I/M7475. In I/M7475, the fine-grained microstructure was obtained by static recrystallization before deformation. On the other hand, the substructure in P/M7475 evolved into fine grains during deformation by CDRX. The percentage of high-angle and random boundaries was low at an initial stage of deformation. However, it increased with strain in P/M7475. The microstructural change in P/M7475 influenced a deformation mechanism and affected grain boundary sliding (GBS). The ratio of contribution of GBS to total elongation was low at an early stage of deformation in P/M7475. However, it increased with deformation progressed. It is suggested that the deformation behavior in P/M7475 changed from dislocation creep to superplasticity as the dominant deformation mechanism changed to GBS. The activation energy for superplastic flow in P/M7475 was close to that for lattice self-diffusion in pure aluminum. It is therefore concluded that the dominant deformation mechanism after CDRX in P/M7475 is GBS accommodated by dislocation movement controlled by lattice self-diffusion, similar to that in I/M7475.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. H. Iwasaki, Y. Irie, S. Hayami, K. Higashi and T. Ito, J. Jpn. Inst. Light Met. 39 (1989) 798.10.2464/jilm.39.798 ↗
2. M. K. Rao and A. K. Mukherjee, Mater. Sci. Eng. 80 (1986) 181.10.1016/0025-5416(86)90196-5 ↗
3. D. H. Shin, K.-T. Park and E. J. Lavernia, ibid. 201(1995) 118.10.1016/0921-5093(95)09761-9 ↗
4. D. H. Shin, C. S. Lee and W.-J. Kim, Acta Mater. 45 (1997) 5195.10.1016/S1359-6454(97)00185-7 ↗
5. J. Xinggang, C. Jianzhong and M. Longxiang, Mater. Sci. Tech. 9 (1993) 493.10.1179/mst.1993.9.6.493 ↗
6. Y. Hirose, Y. Miyagi, M. Hino and T. Eto, J. Jpn. Inst. Light Met. 36(1986) 491.10.2464/jilm.36.491 ↗
7. Y. Takayama, T. Tozawa and H. Kato, Acta Mater. 47 (1999) 1263.10.1016/S1359-6454(98)00416-9 ↗
8. K. Higashi, H. Imamura, T. Ito and S. Tanimura, in “Superplasticity in Aerospace II,” edited by T. R. McNelley and H. C. Heikkenen (The Minerals, Metals & Materials Society, 1990) p. 251.
9. T. Hirata, T. Mukai, N. Saito, M. Kohzu, S. Tanabe and K. Higashi, Mater. Sci. Forum 304–306 (1999) 333.10.4028/www.scientific.net/MSF.304-306.333 ↗
10. K. Higashi, S. Tanimura and T. Ito, in Materials Research Society Symposium Proceedings, Vol. 196, edited by M. J. Mayo, M. Kobayashi and J. Wadsworth (1990) p. 385.10.1557/PROC-196-385 ↗
11. K. Matsuki, G. Staniek, H. Nakagawa and M. Tokizawa, Z. Metallkde 79 (1988) 231.
12. K. Matsuki, T. Iwaki, M. Tokizawa and Y. Murakami, Mater. Sci. Tech. 7 (1991) 513.10.1179/mst.1991.7.6.513 ↗
13. N. Furushiro and S. Hori, in Materials Research Society Symposium Proceedings, Vol. 196, edited by M. J. Mayo, M. Kobayashi and J. Wadsworth (1990) p. 249.10.1557/PROC-196-249 ↗
14. W.-J. Kim, Mater. Sci. Eng. A 277 (2000) 134.10.1016/S0921-5093(99)00552-3 ↗
15. S. J. Hales and T. R. Mcnelley, Acta Metall. 36 (1988) 1229.10.1016/0001-6160(88)90275-1 ↗
16. T. R. Mcnelley, E.-W. Lee and M. E. Mills, Metal. Trans. 17A (1986) 1035.10.1007/BF02661269 ↗
17. M. Mabuchi, J. Koike, H. Iwasaki, K. Higashi and T. G. Langdon, Mater. Sci. Forum 170–172 (1994) 503.10.4028/www.scientific.net/MSF.170-172.503 ↗
18. B. M. Watts, M. J. Stowell, B. L. Baikie and D. D. E. Owen, Metal Sci. 10 (1976) 189.10.1016/0036-9748(76)90147-2 ↗
19. M. J. Stowell, B. L. Baikie and D. D. E. Owen, Metal Sci. Idem.,ibid. 10 (1976) 198.
20. R. Grimes, M. J. Stowell and B. M. Watts, Metals Tech. 3 (1976) 154.10.1179/030716976803391764 ↗
21. T. G. Langdon, Metall. Trans. A 13A (1982) 689.10.1007/BF02642383 ↗
22. O. D. Sherby and J. Wadsworth, in “Deformation Processing and Microstructure,” edited by G. Krauss (ASM, Materials Park, OH, 1984) p. 355.
23. T. Watanabe, Mater. Sci. Eng. A 166 (1993) 11.10.1016/0921-5093(93)90306-Y ↗
24. H. Kokawa, T. Watanabe and S. Karashima, Phil. Mag. A 44 (1981) 1239.10.1080/01418618108235806 ↗
25. S. I. Wright, J. Comp. Ass. Microscopy 5 (1993) 207.
26. F. A. Mohamed, J. Mater. Sci. 18 (1983) 582.10.1007/BF00560647 ↗
27. R. S. Mishra, T. R. Bieler and A. K. Mukherjee, Acta Metall. Mater. 43 (1995) 877.10.1016/0956-7151(94)00323-A ↗
28. H. J. Frost and M. F. Ashby, in “Deformation-Mechanisms Maps” (Pergamon Press, 1982) p. 21.
29. Z. R. Lin, A. H. Chokshi and T. G. Langdon, J. Mater. Sci. 23 (1988) 2712.10.1007/BF00547441 ↗
30. F. Weinberg, Tras. Metal. Soc. AIME 212 (1958) 808.
31. M. G. Zelin, T. R. Bieler and A. K. Mukherjee, Metal. Trans. 24A (1993) 1208.10.1007/BF02657253 ↗
32. T. R. Mcnelley, M. E. Mcmahon and S. J. Hales, Scr. Mater. 36 (1997) 369.10.1016/S1359-6462(96)00403-4 ↗
33. P. Metenier, G. G. Doncel, O. A. Ruano, J. Wolfenstine and O. D. Sherby, Mater. Sci. Eng. A 215 (1990) 195.10.1016/0921-5093(90)90169-4 ↗