Analytical study of tensile behaviors of UHMWPE/nano-epoxy bundle composites
Source abstract
Abstract
Ultra-high molecular polyethylene (UHMWPE) fiber reinforced nano-epoxy and pure epoxy composites in bundle form were prepared and tested for tensile properties. UHMWPE fiber composites are well known for their superior tensile performance, and this work was conducted to assess the effect of adding nanoadditives to the resin and to evaluate possible enhancements or degradations to that attribute. The results showed that tensile tests on various types of UHMWPE fibers/nano-epoxy bundle composites resulted in an increase in modulus of elasticity due to the addition of small amounts of reactive nanofibers (r-GNFs) to epoxy matrix. It was observed that the modulus of elasticity of the composite bundles depended on both volume fractions of the matrix and the weight percent (wt%) of r-GNFs in the matrix. A non-linear relationship was established among them and an optimal modulus was determined by calculation. A three-dimensional surface plot considering these two parameters has been generated which gives an indication of change in modulus of elasticity with respect to volume fraction of matrix and wt% of r-GNFs in the matrix. A Weibull analysis of tensile strengths for the various bundle composites was performed and their Weibull moduli were compared. The results showed that presence of r-GNFs in the composites increased the strength effectively, and 0.3 wt% r-GNFs based composites showed the highest strength. An important ancillary finding is that optimum tensile values are a function not only of the above parameters, but also strongly influenced by the addition of diluents which control the viscosity of the blend.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Tribology and Wear Analysis · Fiber-reinforced polymer composites · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Jang BZ (1994) Advanced polymer composites: principles and applications. ASM International
2. Ujvari T, Toth A, Bertoti I, Nagy PM, Juhasz A (2001) Solid State Ionics 141:225. doi:https://doi.org/10.1016/S0167-2738(01)00750-010.1016/S0167-2738(01)00750-0 ↗
3. Torrisi L, Gammino S, Mezzasalma AM, Visco AM, Badziak J, Parys P, Wolowski J, Woryna E, Laska L, Pfeifer M, Rohlena K, Boody FP (2004) Appl Surf Sci 227:1149. doi:https://doi.org/10.1016/j.apsusc.2003.11.07810.1016/j.apsusc.2003.11.078 ↗
4. Kostov KG, Ueda M, Tan IH, Leite NF, Beleto AF, Gomes GF (2004) Surf Coat Technol 186:287. doi:https://doi.org/10.1016/j.surfcoat.2004.03.03310.1016/j.surfcoat.2004.03.033 ↗
5. Chen JS, Lau SP, Sun Z, Tay BK, Yu GQ, Zhu YF, Zhu DZ, Xu HJ (2001) Surf Coat Technol 138:33. doi:https://doi.org/10.1016/S0257-8972(00)01126-910.1016/S0257-8972(00)01126-9 ↗
6. Cohen Y, Rein DM, Vaykhansky L (1997) Compos Sci Technol Vol 57:1149. doi:https://doi.org/10.1016/S0266-3538(96)00149-210.1016/S0266-3538(96)00149-2 ↗
7. Wang J, Smith K Jr (1999) Polymer 40:7261. doi:https://doi.org/10.1016/S0032-3861(99)00034-810.1016/S0032-3861(99)00034-8 ↗
8. Dilsiz N, Ebert E, Weisweiler W, Akovali G (1995) J Colloid Interf Sci 170:241. doi:https://doi.org/10.1006/jcis.1995.109310.1006/jcis.1995.1093 ↗
9. Drzal L, Madhukar M (1993) J Mater Sci 28:569. doi:https://doi.org/10.1007/BF0115123410.1007/BF01151234 ↗
10. Zhamu A, Wingert MT, Jana S, Zhong WH, Stone JJ (2007) Composites A 38:699. doi:https://doi.org/10.1016/j.compositesa.2006.10.00110.1016/j.compositesa.2006.10.001 ↗
11. Neema S, Salehi-Khojin A, Zhamu A, Zhong WH, Jana S, Gan YX (2006) J Colloid Interface Sci 299:332 doi:https://doi.org/10.1016/j.jcis.2006.02.01610.1016/j.jcis.2006.02.016 ↗
12. Zhamu A, Zhong WH, Stone JJ (2006) Compos Sci Technol 66:2736. doi:https://doi.org/10.1016/j.compscitech.2006.03.00510.1016/j.compscitech.2006.03.005 ↗
13. Sandler J, Shafter TP, Bauhofer W, Schulte K, Windle AH (1999) Polymer 40:5967. doi:https://doi.org/10.1016/S0032-3861(99)00166-410.1016/S0032-3861(99)00166-4 ↗
14. Yue ZR, Jiang W, Wang L, Toghiani LH, Gardner SD, Pittman CU (1999) Carbon 37:1607. doi:https://doi.org/10.1016/S0008-6223(99)00041-X10.1016/S0008-6223(99)00041-X ↗
15. Pittman CU, He GR, Wu B, Gardener SD (1997) Carbon 35:313
16. Wong EW, Sheehan PE, Lieber CM (1997) Science 227:1971. doi:https://doi.org/10.1126/science.277.5334.197110.1126/science.277.5334.1971 ↗
17. Chen XH, Wang JX, Yang HS, Wu GT, Zhang XB, Li WZ (2001) Diamond Relat Mater 10:2057. doi:https://doi.org/10.1016/S0925-9635(01)00486-110.1016/S0925-9635(01)00486-1 ↗
18. Li J, Vergne MJ, Mowles ED, Zhong WH, Hercules DM, Lukehart CM (2005) Carbon 43:2883. doi:https://doi.org/10.1016/j.carbon.2005.06.00310.1016/j.carbon.2005.06.003 ↗
19. Vogelson CT, Koide Y, Alemany LB, Barron AR (2002) Chem Mater 12:795. doi:https://doi.org/10.1021/cm990648e10.1021/cm990648e ↗
20. Choi YK, Sugimoto K, Song S, Gotoh Y, Ohkoshi Y, Endo M (2005) Carbon 43:2199. doi:https://doi.org/10.1016/j.carbon.2005.03.03610.1016/j.carbon.2005.03.036 ↗
21. Zilg C, Dietsche F, Hoffmann B, Dietrich C, Mülhaupt R (2001) Macromol Symp 169(Fillers and Filled Polymers):6510.1002/1521-3900(200105)169:1<65::AID-MASY65>3.0.CO;2-F ↗
22. Lan T, Cho J, Liang Y, Maul P (2001) Nanocomposites-2001, Chicago, 25–27 June
23. Gilbert EN, Hayes BS, Seferis JC (2002) Nanoparticle modification of epoxy based film adhesives, Proc. SAMPE, Covina, CA, p 41
24. Spindler-Ranta S, Bakis CE (2002) Carbon Nanotube reinforcement of a filament winding resin. Proc. SAMPE, Coniva, CA, p 1775
25. Chen C, Curliss D (2001) SAMPE J 37:11
26. Rice BP, Chen C, Cloos L, Curliss D (2001) SAMPE J 37:7
27. Becker O, Barely R, Simon G (2002) Polymer 43:4365. doi:https://doi.org/10.1016/S0032-3861(02)00269-010.1016/S0032-3861(02)00269-0 ↗
28. Becker O, Cheng YB, Varley RJ, Simon GP (2003) Macromolecules 36:1616. doi:https://doi.org/10.1021/ma021344810.1021/ma0213448 ↗
29. Li J, Vergne MJ, Mowles ED, Zhong WH, Hercules DM, Lukehart CM (2005) Carbon 43:2883. doi:https://doi.org/10.1016/j.carbon.2005.06.00310.1016/j.carbon.2005.06.003 ↗
30. Zhong WH, Li J, Xu LR, Lukehart CM (2005) Polym Compos 26:128. doi:https://doi.org/10.1002/pc.2008510.1002/pc.20085 ↗
31. Wingert MT (2004) Improvement of interfacial adhesion between UHMWPE fiber and epoxy matrix using graphitic carbon nano-fiber, a master thesis, North Dakota State University, Department of Mechanical Engineering
32. Jana S, Zhamu A, Zhong WH, Gan YH (2006) J Adhes 82:1157. doi:https://doi.org/10.1080/0021846060099876310.1080/00218460600998763 ↗
33. Jana S, Zhamu A, Gun YX, Zhong WH, Stone JJ (2008) Mater Manuf Process 23:10210.1080/10426910701524717 ↗
34. “https://doi.org/www.maplesoft.com”, Holmgren DE (holmgren@brandonu.ca) Brandon University, Brandon, MB, Canada, Ogilvie JF (ogilvie@munkebo.chem.ou.dk) and Monagan M (monagan@cecm.sfu.ca) Center for Experimental and Constructive Mathematics, Simon Fraser University, Vancouver BC, Canada
35. Johnson JA, Barbato MJ, Hopkins SR, O’Malley MJ (2003) Prog Organ Coat 47:198. doi:https://doi.org/10.1016/S0300-9440(03)00139-510.1016/S0300-9440(03)00139-5 ↗
36. Fanelli M, Feke DL, Manas-Zloczower I (2006) Chem Eng Sci 61:473. doi:https://doi.org/10.1016/j.ces.2005.07.02410.1016/j.ces.2005.07.024 ↗
37. Sun CJ, Saffari P, Sadeghipour K, Baran G (2005) Mater Sci Eng: A 405:287. doi:https://doi.org/10.1016/j.msea.2005.06.03210.1016/j.msea.2005.06.032 ↗
38. Qing Z, Frogley MD, Wagner HD (2002) Compos Sci Technol 61:2139
39. Peterlik H (1995) J Mater Sci 30:1972. doi:https://doi.org/10.1007/BF0035302010.1007/BF00353020 ↗
40. Afferrante L, Ciavarella M, Valenza E (2006) Int J Solids Struct 43:5147. doi:https://doi.org/10.1016/j.ijsolstr.2005.08.00210.1016/j.ijsolstr.2005.08.002 ↗
41. Quinn G (1990) J Am Ceram Soc 73:2374. doi:https://doi.org/10.1111/j.1151-2916.1990.tb07601.x10.1111/j.1151-2916.1990.tb07601.x ↗
42. Jana S, Zhong WH, Gan YX (2007) Mater Sci Eng A l445–1446:10610.1016/j.msea.2006.09.006 ↗
43. Salehi-Khojin A, Stone JJ, Zhong WH (2007) J Compos Mater 41:116310.1177/0021998306067301 ↗