journal article·2000-01

Rubber toughening of plastics Part XIII Dilatational yielding in PA6.6/EPR blends

C. B. Bucknall, A. Lazzeri

Journal of Materials Science· Volume 35· Issue 2
Publisher page

Abstract

Tensile tests were carried out at both constant stress and constant extension rate on polyamide 6.6 blends containing 0–20 wt% of maleinated ethylene-propylene rubber (EPR-g-ma), using specimens conditioned at 50% RH. Longitudinal and lateral strain measurements on creep specimens showed that blends containing EPR-g-ma exhibited dilatation at tensile stresses above 27 MPa. This observation is consistent with the predictions of the particle cavitation model proposed in an earlier paper (A. Lazzeri and C. B. Bucknall, J. Mater. Sci. 28 (1993) 6799). In standard tensile tests on PA6.6/EPR-g-ma blends, cavitation preceded yielding (defined by the 1% offset strain). Creep and yield data obtained over a range of temperatures and strain rates were correlated using the Eyring equation. The onset of dilatation in these PA6.6/EPR blends was marked by a change in deformation kinetics, which is analysed using a modified version of Gurson's equation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Polymer crystallization and properties · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. C. B. Bucknall, P. S. Heather and A. Lazzeri, J. Mater. Sci. 24 (1989) 2255.10.1007/BF02385450 ↗
2. A. Lazzeri and C. B. Bucknall, ibid. 28 (1993) 6799.10.1007/BF00356433 ↗
3. C. B. Bucknall, A. Karpodinis and X. C. Zhang, ibid. 29 (1994) 3377.10.1007/BF00352036 ↗
4. A. Lazzeri and C. B. Bucknall,Polymer 36 (1995) 2895.10.1016/0032-3861(95)94338-T ↗
5. ASTM Standard D 638.
6. A. Cross and R. N. Haward, J. Polym. Sci., Polym Phys edn 11 (1973) 2423.10.1002/pol.1973.180111211 ↗
7. N. G. Mc crum, C. P. Buckley and C. B. Bucknall, “Principles of Polymer Engineering,” 2nd edn (Oxford University Press, Oxford, 1997).
8. H. Eyring, J. Chem. Phys. 4 (1936) 283.10.1063/1.1749836 ↗
9. E. N. da c. andrade, Proc. Roy. Soc. A84 (1910) 1.
10. L. L. Ban, M. J. Doyle, M. M. Disko and G. R. Smith, Polymer Comm. 29 (1988) 163.
11. A. L. Gurson, J. Engng. Mater. Technol., Trans. ASME 99 (1977) 2.10.1115/1.3443401 ↗
12. H. J. Jeong and J. Pan, Int. J. Solid Structures 32 (1995) 3669.10.1016/0020-7683(95)00009-Y ↗
13. A. C. Steenbrink, E. Van der giessen and P. D. Wu, J. Mech. Phys Solids 45 (1997) 405.10.1016/S0022-5096(96)00093-2 ↗
14. V. Tvergaard, Int. J. Fracture, 17 (1981) 389.10.1007/BF00036191 ↗
15. V. Tvergaard, Int. J. Fracture 18 (1982) 237.10.1007/BF00015686 ↗
16. C. Cheng, A. Hiltner, E. Baer, P. R. Soskey and S. G. Mylonakis, J. Appl. Polym. Sci. 52 (1994) 177.10.1002/app.1994.070520206 ↗