Effects of additive amount on microstructure and mechanical properties of silicon carbide-silicon nitride composites
Source abstract
Abstract
Powder mixtures of β-SiC-α-Si3N4 in a weight ratio of 1 : 1 containing 5–20 wt% Y-Mg-Si-Al-O-N oxynitride as a sintering additive were liquid-phase sintered at 1800°C for 3 h by hot-pressing. These materials had a microstructure of “in situ-toughened composites” as a result of the α → β phase transformation of Si3N4 during sintering. The introduction of larger amount of additives accelerated the grain growth of elongated β-Si3N4 grains with higher aspect ratio, resulting in the improved fracture toughness and strength. Typical flexural strength and fracture toughness of SiC-Si3N4 composites containing 15 wt% oxynitride glass were 860 MPa and 5.7 MPa · m1/2, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. M. A. Janney, Am. Ceram. Soc. Bull. 66 (1987) 322.
2. Y. Ohya, M. J. Hoffmann and G. Petzow, J. Amer. Ceram. Soc. 75 (1992) 2479.10.1111/j.1151-2916.1992.tb05600.x ↗
3. P. Greil, G. Petzow and H. Tanaka, Ceram. Int. 13 (1987) 19.10.1016/0272-8842(87)90034-4 ↗
4. H. Tanaka and N. Iyi, J. Amer. Ceram. Soc. 78 (1995) 1223.10.1111/j.1151-2916.1995.tb08473.x ↗
5. D. Shaoming, J. Dongliang, T. Shouhong and G. Jingkun, Ceram. Int. 21 (1995) 451.10.1016/0272-8842(95)94473-N ↗
6. D.-H. Kuo and W. M. Kriven, J. Eur. Ceram. Soc. 18 (1998) 51.10.1016/S0955-2219(97)00106-4 ↗
7. K. S. Cho, H. J. Choi, J. G. Lee and Y.-W. Kim, Ceram. Int. 24 (1998) 299.10.1016/S0272-8842(97)00015-1 ↗
8. Y. I. Lee, Y.-W. Kim, H. J. Choi and J. G. Lee, J. Kor. Ceram. Soc. 36 (1999) 799.
9. V. D. Krstic, Mater. Res. Soc. Bull. 20 (1995) 46.10.1557/S0883769400049228 ↗
10. H. J. Choi, Y.-W. Kim and J. G. Lee, J. Mater. Sci. Lett. 15 (1996) 375.10.1007/BF00277170 ↗
11. P. F. Becher, E. Y. Sun, C.-H. Hsueh, K. B. Alexander, S.-L. Hwang, S. B. Waters and C. G. Westmoreland, Acta Mater. 44 (1996) 3881.10.1016/S1359-6454(96)00069-9 ↗
12. Y.-W. Kim, Y. I. Lee, M. Mitomo, H. J. Choi and J. G. Lee, J. Amer. Ceram. Soc. 82 (1999) 1058.10.1111/j.1151-2916.1999.tb01873.x ↗
13. T. Rouxel and P. Verdier, Acta Mater. 44 (1996) 2217.10.1016/1359-6454(95)00367-3 ↗
14. B. Baron, T. Chariter, T. Rouxel, P. Verdier and Y. Laurent, J. Eur. Ceram. Soc. 17 (1997) 773.10.1016/S0955-2219(96)00165-3 ↗
15. Y.-W. Kim, M. Mitomo and H. Hirotsuru, J. Amer. Ceram. Soc. 78 (1995) 3145.10.1111/j.1151-2916.1995.tb09100.x ↗
16. Idem., ibid. 80 (1997) 99.10.2466/PR0.80.1.99-106 ↗
17. G. R. Anstis, P. Chantikul, B. R. Lawn and D. B. Marshall, ibid. 64 (1981) 533.10.1111/j.1151-2916.1981.tb10320.x ↗
18. Y.-W. Kim and M. Mitomo, ibid. 82 (1999) 2731.10.1111/j.1151-2916.1999.tb02149.x ↗
19. H. J. Park, H. E. Kim and K. Nihara, J. Eur. Ceram. Soc. 18 (1998) 907.10.1016/S0955-2219(97)00180-5 ↗
20. Y.-W. Kim, M. Mitomo, H. Emoto and J. G. Lee, J. Amer. Ceram. Soc. 81 (1998) 3136.10.1111/j.1151-2916.1998.tb02748.x ↗
21. D. H. Cho, Y.-W. Kim and W. J. Kim, J. Mater. Sci. 32 (1997) 4777.10.1023/A:1018635131661 ↗