journal article·2001-07

Fabrication and characteristics of AA6061/SiCp composites by pressureless infiltration technique

K. B. Lee, H. S. Sim, S. H. Kim, K. H. Han, H. Kwon

Journal of Materials Science· Volume 36· Issue 13
Publisher page

Abstract

The tensile properties and microstructures of AA6061/SiCp composites fabricated by the pressureless infiltration method under a nitrogen atmosphere were examined. Since the spontaneous infiltration of molten AA6061 into the powder bed containing SiCp occurred at 800 °C for 1 hour under a nitrogen atmosphere, it was possible to fabricate composites reinforced with SiCp. Reaction product (Al 4 C 3 ) was formed at the interface between SiCp and Al alloy matrix. In addition, the amount and size of the Al 4 C 3 is increased significantly by increasing the infiltration temperature. The reaction product (AlN) was formed as a result of the in situ reaction in both the control alloy and the composite. A significant strengthening even in the control alloy occurred due to the formation of in situ AIN particle even without an addition of SiCp. While a further strengthening of the composite was produced by the reinforced SiCp, strain to failure of the composite fabricated at 800 °C showed the lowest value (1.3%) in the T6 condition due to the formation of the severe reaction product (Al 4 C 3 ). The grain size of the control alloy significantly decreased to about 20 μm compared to 50 μm for the commercial alloy. In addition, the grain size in the composite reinforced with SiCp further decreased to about 8.0 μm. This grain refinement contributed to strengthening of the control alloy and composite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced materials and composites · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. A. Mortensen and I. Jin, Int. Mater. Rev. 37 (1992) 101.10.1179/imr.1992.37.1.101 ↗
2. A. Ibrahim, F. A. Mohamed and E. S. Lavernia, J. Mater. Sci. 26 (1991) 1137.10.1007/BF00544448 ↗
3. M. J. Koczak and M. K. Premkumar, J. Metall. 45 (1993) 44.
4. R. Asthana, J. Mater. Sci. 33 (1998) 1679.10.1023/A:1004308027679 ↗
5. M. K. Aghajanian, J. T. Burke, D. R. White and A. S. Nagelberg, SAMPE Q 20(4) (1989) 43.
6. M. K. Aghajanian, M. A. Rocazella, J. T. Burke and S. D. Keck, J. Mater. Sci. 6 (1991) 447.10.1007/BF00576541 ↗
7. A. W. Urquhart, Advanced Mater. Process, July (1991) 25.
8. Idem., Mater. Sci. Eng. 144 (1991) 75.10.1016/0921-5093(91)90211-5 ↗
9. R. E. Everett and R. J. Arsenault, in “Metal Matrix Composites: Processing and Interfaces” (Academic Press, 1991) p. 121.10.1016/B978-0-12-341832-6.50005-0 ↗
10. M. K. Aghajanian, A. S. Nagelberg and C. R. Kennedy, U.S Patent no. 5020584.
11. K. B. Lee, Y. S. Kim and H. Kwon, Metall. Mater. Trans. A 29 (1998) 3087.10.1007/s11661-998-0216-9 ↗
12. K. B. Lee and H. Kwon, ibid.30 (1999) 2999.10.1007/s11661-999-0137-2 ↗
13. K. B. Lee, H. S. Sim, S. W. Heo, S. Y. Cho and H. Kwon, Korea Inst. Metall & Mater. 6 (2000) 25.
14. K. B. Lee, J. P. Ahn and H. Kwon, Metall. Mater. Trans. A 32 (2001) 1007.10.1007/s11661-001-0358-5 ↗
15. K. B. Lee, H. S. Sim, S. Y. Cho and H. Kwon, Mater. Sci. Engr. 302 (2001) 227.10.1016/S0921-5093(00)01831-1 ↗
16. J. C. Lee, J. Y. Byun, S. B. Park and H. I. Lee, Acta Mater. 46 (1998) 1771.10.1016/S1359-6454(97)00265-6 ↗
17. V. Massardier and P. Merle, Mater. Sci. Engr. 249 (1998) 109.10.1016/S0921-5093(98)00579-6 ↗
18. W. M. Zhong, G. L'espÉrance and M. SuÉry, Metall. Mater. Trans. A 26 (1995) 2637.10.1007/BF02669421 ↗
19. J. C. Viala, F. Bosselet, V. Laurent and Y. Lepetitcorps, J. Mater. Sci. 28 (1993) 5301.10.1007/BF00570081 ↗
20. R. Y. Lin and K. Kannikeswaran, in Proc. Int. Conf. on Interface in Metal-Ceramic Composites, Anaheim, CA, February 1990, edited by R. Y. Lin, R. J. Arsenault, G. P. Martins and S. G. Fishman (TMS, 1990) p. 153.
21. G. Selvaduray, R. Hickman, D. Quinn, D. Richard and D. Rowland, in Proc. Int. Conf. on Interface in Metal-Ceramic Composites, Anaheim, CA, February 1990, edited by R.Y. Lin, R.J. Arsenault, G. P. Martins and S. G. Fishman (TMS, 1990) p. 271.
22. “CRCMaterials Science and Engineering Handbook,” edited by J. F. Shackelford, W. Alexander and J. S. Park (1994) p. 43.
23. W. M. Zhong, G. L'espÉrance and M. SUÉRY;, Mater. Sci. Engr. 93 (1996) 93.10.1016/0921-5093(96)10182-9 ↗
24. F. J. Humphreys, W. S. Miller and M. R. Djazeb, Mater. Sci. Technol. 6 (1990) 1157.10.1179/mst.1990.6.11.1157 ↗
25. M. Ferry, P. Monroe, A. Crosky and T. Chandra, ibid. 8 (1992) 43.10.1179/026708392790169894 ↗