Mechanical milling of fullerene with carbide forming elements
Source abstract
Abstract
Mechanical alloying of Ti, V, Cr, Mo and W with fullerene (C60(C70)) and graphite reveals that fullerene is more reactive than graphite. The formation heat of carbide is the driving force for reaction in the mechanical alloying process. Higher heat of formation results in the direct formation of carbide in Ti-C systems, and the formation of carbide in V-C systems during the subsequent heating of milled powder. In the systemsc with lower carbide heat of formation, a mixture of metal with carbon is obtained by ball milling. No carbide was obtained even after heating the milled powders up to 973 K. Small amount of fullerene remained when milled with Mo and W for 10 hours.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Fullerene Chemistry and Applications · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. P. MATTEAZZI and G. Le CAER, J. Amer. Ceram. Soc. 74 (1991) 1382.10.1111/j.1151-2916.1991.tb04116.x ↗
2. A. P. RADLINSKI and A. CALKA, Mater. Sci. Eng. A 134 (1991) 1376.10.1016/0921-5093(91)90994-X ↗
3. G. Le CAER, E. BAUER-GRAUSSE, A. PIANELLI, E. BOUSY and P. MATTEAZZI, J. Mater. Sci. 25 (1990) 4726.10.1007/BF01129932 ↗
4. T. TANAKA, S. NASU, K. N. ISHIHARA and P. H. SHINGU, J. Less-Common Metals 171 (1991) 237.10.1016/0022-5088(91)90147-V ↗
5. A. CALKA and W. A. KACZMAREK, Scripta Metall. Mater. 26 (1992) 249.10.1016/0956-716X(92)90181-D ↗
6. L. LIN and Y. D. DONG, Nanostruct. Mater.2 (1993) 403.
7. P. MATTEAZZI, F. MIANI and G. Le CAER, J. Hard Mater. 2 (1991) 171.
8. F. MIANI, P. MATTEAZZI, G. DOLCETTI, A. LUTMAN and A. TRAVARELL, Mater. Sci. Eng. A 168 (1993) 153.10.1016/0921-5093(93)90719-U ↗
9. L. L. YE and M. X. QUAN, Nanostruct. Mater.5 (1995) 25.10.1016/0965-9773(95)00012-4 ↗
10. S. QUINTANA-MOLINA, J. G. CABANAS-MORENO, Z. G. LIU and M. UMEMOTO, in Proceedings of the Int. Symp. on Designing, Processing and Properties of Advanced Eng. Mater. (ISAEM-97), Toyohashi (1997), edited by T. Kobayashi, M. Umemoto and M. Morinaga, p. 643.
11. Z. G. LIU, H. OHI, K. MASUYAMA, K. TSUCHIYA and M. UMEMOTO, J. Mater. Res., 15 (2000) 1528.10.1557/JMR.2000.0219 ↗
12. V. Ya DAVYDOV, F. M. ROSHINA, G. N. FILATOVA and M. M. KHRUSTALEVA, Russian J. Phys. Chem. 70 (1996) 1563.
13. Idem. ibid 70 (1996) 1723.
14. J. D. SAXBY, S. P. CHATFIELD, A. J. PALMISANO, A. M. VASSALLO, M. A. WILSON and L. S. K. PANG, J. Phys. Chem. 96 (1992) 17.10.1021/j100180a007 ↗
15. H. HERMAN, Th. SCHUBER, W. GRUNER and N. MATTERN, Nanostruct. Mater.8 (1997) 215.10.1016/S0965-9773(97)00010-X ↗
16. K. NIWASE, T. TANAKA, Y. KAKIMOTO, K. N. ISHIHARA and P. H. SHINGU, Mater. Trans. JIM 36 (1995) 282.10.2320/matertrans1989.36.282 ↗
17. T. D. SHEN, W. Q. GE, K. Y. WANG, M. X. QUAN, J. T. WANG, W. D. WEI and C. C. KOCH, Nanostruct. Mater. 7 (1996) 393.10.1016/0965-9773(96)00010-4 ↗
18. N. J. WELHAM and J. S. WILLIAMS, Carbon 36 (1998) 1309.10.1016/S0008-6223(98)00111-0 ↗
19. T. ANAKA, M. MOTOYAMA, K. N. ISHIHARA and P. H. SHINGU, Mater. Trans. JIM 36 (1995) 27610.2320/matertrans1989.36.276 ↗
20. T. R. OHNO, Y. CHEN, S. E. HARVEY, G. H. KROLL, P. J. BENNING, J. H. WEAVER, L. P. F. CHIBANTE and R. E. SMALLEY, Phys. Rev. B 47 (1993) 2389.10.1103/PhysRevB.47.2389 ↗
21. F. TAST, N. MALINOWSKI, S. FRANK, M. HEINEBRODT, I. M. L. BILLAS and T. P. MARTIN, Phys. Rev. Lett. 7777 (1996) 3529.10.1103/PhysRevLett.77.3529 ↗
22. L. NORIN, S. McGINNIS, U. JANSSON and J. O. CARLSSON, J. Vac. Sci. Technol. A 15 (1997) 30382.10.1116/1.580850 ↗
23. L. NORIN, U. JANSSON, C. DYER, P. JACOBSSON and S. McGINNIS, Chem. Mater. 10 (1998) 1184.10.1021/cm9707871 ↗
24. L. NORIN, H. HOGBERG, J. LU, U. JANSSON and J. O. MALM, Appl. Phys. Lett. 73 (1998) 2754.10.1063/1.122580 ↗
25. M. R. PEDERSON, D. V. POREZAG, D. C. PATTON and E. KAXIRAS, Chem. Phys. Lett. 303 (1999) 373.10.1016/S0009-2614(99)00255-9 ↗
26. L. NORIN, U. JANSSON and J. O. CARLSON, Thin Solid Films 293 (1997) 133.10.1016/S0040-6090(96)08987-0 ↗
27. L. MORO, A. PAUL, D. C. LORENTS, R. MALHOTA, R. S. RUOFF, P. LAZZERI, L. VANZETTI, A. LUI and S. SUBRAMONEY, J. Appl. Phys. 81 (1997) 6141.10.1063/1.364395 ↗
28. Z. G. LIU, J. T. GUO, L. L. YE, G. S. LI and Z. Q. HU, Appl. Phys. Lett. 65 (1994) 2666.10.1063/1.112596 ↗
29. E. MA, J. PAGAN, S.-Q. XIAO, J. J. LEWANDOWSKI and A. H. HEUER, J. Mater. Res.8 (1993) 1311.10.1557/JMR.1993.1311 ↗
30. R. HULTGREN, P. D. DESAI, D. T. HAWKINS, M. GLEISER and K. K. KELLEY (eds.), “Selected Values of the Thermodynamic Properties of Binary Alloys” (ASM, Metals Park, Ohio1973).
31. H. E. BOYER and T. L. GALL (eds.), “Metals Handbook,” Desk Edition (ASM, Metals Park, 1985).