journal article·2000-11

Phase stability aspects of various apatite-aluminium oxide composites

E. Adolfsson, L. Hermansson

Journal of Materials Science· Volume 35· Issue 22
Publisher page

Abstract

For aluminium oxide-hydroxyapatite composites sintered in air, decomposition of hydroxyapatite to tricalcium phosphate was initiated at temperatures below 1000°C and completed at 1200°C. Composites of aluminium oxide and various apatites (hydroxyapatite, fluorapatite and chlorapatite) as well as the pure materials were hot isostatically pressed at 1200°C for 1 h at a pressure of 160 MPa. Due to the closed system used, the thermal stability was improved and no phase changes were detected in the hot isostatically pressed aluminium oxide-apatite composites. These materials were crushed and thereafter heat-treated in air at several temperatures in order to study the phase stability. In the fluorapatite and chlorapatite based composites, the apatite reacted with the moisture in the air and partly converted to oxyhydroxyapatite and decomposition of the latter phase was initiated. The phase composition in the materials was evaluated by X-ray powder diffraction and the microstructure of the hot isostatically pressed samples was studied in a scanning electron microscope.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Chemical Synthesis and Characterization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. G. DE WITH, H. J. A. VAN DIJK, N. HATTU and K. PRIJS, J. Mater. Sci. 16 (1981) 1592.10.1007/BF02396876 ↗
2. R. Z. LEGEROS and J. P. LEGEROS, in "An Introduction to Bioceramics," edited by L. L. Hench and J. Wilsson (World Scientific Publishing Co., Singapore, 1993) p. 139.10.1142/9789814317351_0009 ↗
3. I. C. CLARKE and G. WILLMANN, in "Bone Implant Interface," edited by H. U. Cameron (Mosby, St. Louis, 1994) p. 203.
4. H. JI and P. M. MARQUIS, J. Mater. Sci. 28 (1993) 1941.10.1007/BF00595767 ↗
5. H. Y. JUANG and M. H. HON, Mater. Sci. Eng. C2 (1994) 77.10.1016/0928-4931(94)90033-7 ↗
6. E. CHAMPION, S. GAUTIER and D. BERNACHEASSOLLANT, J. Mater. Sci. Mater. Med. 7 (1996) 125.10.1007/BF00058724 ↗
7. T. NOMA, N. SHOJI, S. WADA and T. SUZUKI, J. Ceram. Soc. Jpn. Inter. Ed. 101 (1993) 898.10.2109/jcersj.101.923 ↗
8. M. DIMITROVA-LUKáCS, A. JUHáSZ, G. VöRöS and P. ARATÓ, Silic. Ind. 61 (1996) 85.
9. J. LI, B. FARTASH and L. HERMANSSON, Interceram 39 (1990) 20.
10. Idem., Biomaterials 16 (1995) 417.10.1016/0142-9612(95)98860-G ↗
11. M. DIMITROVA-LUKáCS, ZS. SUBA, L. MIKLÓS, J. MINK and P. LUKáCS, Bioceram., Proc. Int. Symp. Ceram. Med. 8 (1995) 403.
12. H. JI and P. M. MARQUIS, Biomaterials 13 (1992) 744.10.1016/0142-9612(92)90011-C ↗
13. E. ADOLFSSON, M. NYGREN and L. HERMANSSON, J. Am. Ceram. Soc. 82 (1999) 2909.10.1111/j.1151-2916.1999.tb02176.x ↗
14. J. ZHOU, X. ZHANG, J. CHEN, S. ZENG and K. DE GROOT, J. Mater. Sci. Mater. Med. 4 (1993) 83.10.1007/BF00122983 ↗
15. B. LOCARDI, U. E. PAZZAGLIA, C. GABBI and B. PROFILO, Biomaterials 14 (1993) 437.10.1016/0142-9612(93)90146-S ↗
16. K. E. JOHANSSON, T. PALM and P. E. WERNER, J. Phys. E: Sci Instrum. 13 (1980) 1289.10.1088/0022-3735/13/12/015 ↗
17. P. E. WERNER, Arkiv Kemi 31 (1969) 513.
18. G. C. MAITI and F. FREUND, J. Inorg. Nucl. Chem. 43 (1981) 2633.10.1016/0022-1902(81)80589-1 ↗
19. J. C. ELLIOTT and R. A. YOUNG, Nature 214 (1967) 904.10.1038/214904b0 ↗
20. R. A. YOUNG and D. W. HOLCOMB, Calcif. Tissue. Int. 34 (1982) S17.
21. R. MAZELSKY, R. H. HOPKINS and W. E. KRAMER, J. Cryst. Growth. 3, 4 (1968) 360.
22. J. S. PRENER, J. Solid. State. Chem. 3 (1971) 49.10.1016/0022-4596(71)90006-5 ↗