journal article·2001-10

Formation and evaluation of highly uniform aluminate interface coatings for sapphire fiber reinforced ceramic matrix composites (FRCMCs) using carboxylate-alumoxane nanoparticles

Rhonda L. Callender, Andrew R. Barron

Journal of Materials Science· Volume 36· Issue 20
Publisher page

Abstract

Sapphire fibers have been dip-coated in aqueous and CHCl3 solutions of carboxylate-alumoxane nanoparticles and calcium-, lanthanum-, and yttrium-doped carboxylate-alumoxane nanoparticles and fired up to 1400°C to form uniform, conformal and contiguous, aluminate coatings. Optimum solvent, dip/dry, and firing sequences were determined for the formation of crack-free coatings. Both carboxylate-alumoxane and ceramic coated fibers were examined by field emission scanning electron and transmission electron microscopy, microprobe analysis and optical microscopy. Coatings produced were stable to thermal cycling in air up to a temperature of 1400°C. The ability of the carboxylate-alumoxanes to provide crack infiltration and repair was demonstrated. Sapphire fiber/alumina matrix FRCMCs have been prepared with calcium-, lanthanum-, and yttrium-aluminate interphase layers. Microscopy and fiber push-out data confirm that the calcium- and lanthanum-aluminate coatings provide a means for controlling failure properties at the fiber-matrix interface. However, FRCMCs containing YAG-coated fibers failed catastrophically before interfacial debonding and/or sliding occurred.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Silicone and Siloxane Chemistry · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. “Ceramic Fibers and Coatings: Advanced Materials for the 21st Century,” National Materials Advisory Board and National Research Council Commission on Engineering and Technical Systems Publication NMAB-494, National Academy Press, Washington, D.C. (1998).
2. A. G. Evans and D. S. Marshall, Acta Metall.Mater. 37 (1989) 2567.10.1016/0001-6160(89)90291-5 ↗
3. R. J. Kerans, R. S. Hay, N. J. Pagano and T. A. Parthasarathy, Am.Ceram.Soc.Bull. 68 (1989) 429.
4. R. W. Rice, J. R. Spann, D. Lewis and W. Coblenz, Ceram.Eng.Sci.Proc. 5 (1984) 614.10.1002/9780470320228.ch17 ↗
5. R. A. Lowden, ORNL/TM-11039, Oak Ridge National Laboratory (1989).
6. J. B. Davis, E. Bischoff and A. G. Evans, in “Advanced Composite Materials,” edited by M. E. Sacks (American Ceramic Society, 1991) p. 631.
7. M. K. Cinibulk, Ceram.Eng.Sci.Proc. 15 (1994) 721.10.1002/9780470314555.ch16 ↗
8. P. E. D. Morgan and D. B. Marshall, Mater.Sci.Eng. A162 (1993) 15.10.1016/0921-5093(90)90026-Y ↗
9. M. K. Cinibulk, J.Mat.Res. 10 (1995) 71.10.1557/JMR.1995.0071 ↗
10. A. Utsonomiya, K. Tanaka, H. Morikawa, F. Marumo and H. Kojima, J.Solid State Chem. 75 (1988) 197.10.1016/0022-4596(88)90317-9 ↗
11. N. Iyi, S. Takekawa and S. Kimura, ibid. 83 (1989) 8.10.1016/0022-4596(89)90048-0 ↗
12. P. R. C. Ropp and B. Carroll, J.Am.Ceram.Soc. 63 (1980) 416.10.1111/j.1151-2916.1980.tb10203.x ↗
13. M. K. Cinibulk, Ceram.Eng.Sci.Proc. 16 (1995) 633.10.1002/9780470314784.ch4 ↗
14. B. E. Yoldas, J.Non-Cryst.Solids 63 (1984) 145.10.1016/0022-3093(84)90393-4 ↗
15. R. L. Callender, C. J. Harlan, N. M. Shapiro, C. D. Jones, D. L. Callahan, M. R. Wiesner, R. Cook and A. R. Barron, Chem.Mater. 9 (1997) 2418.10.1021/cm9703684 ↗
16. C. C. Landry, N. PappÈ, M. R. Mason, A. W. Apblett, A. N. Tyler, A. N. Macinnes and A. R. Barron, J.Mater.Chem. 5 (1995) 331.10.1039/JM9950500331 ↗
17. R. L. Callender, C. J. Harlan, D. L. Callahan, M. Wiesner, R. L. Cook and A. R. Barron, Ceramic Trans. 87 (1998) 13.
18. A. Kareiva, C. J. Harlan, D. B. Macqueen, R. Cook and A. R. Barron, Chem.Mater. 8 (1996) 2331.10.1021/cm960153e ↗
19. C. J. Harlan, A. Kareiva, D. B. Macqueen, R. Cook and A. R. Barron, Adv.Mater. 9 (1997) 68.10.1002/adma.19970090116 ↗
20. R. L. Callender and A. R. Barron, J.Am.Ceram.Soc. 83 (2000) 1777.10.1111/j.1151-2916.2000.tb01464.x ↗
21. E. Hecht and A. Zajac, “Optics” (Addison-Wesley Publishing Company, Reading, MA, 1974).
22. “Handbook of Chemistry and Physics” 66th ed., edited by R. C. Weast (CRC Press, Boca Raton, Fl, 1985).
23. F. C. Montgomery, H. H. Strecket, R. O. Harrington, J. L. Kaae, S. P. Paguio and D. R. Wall, Mat.Res.Soc.Symp.Proc. 180 (1990) 461.10.1557/PROC-180-461 ↗
24. T. K. Gupta and J. Valentich, J.Am.Ceram.Soc. 54 (1971) 355.10.1111/j.1151-2916.1971.tb12315.x ↗
25. M. K. Cinibulk and R. A. Hay, ibid. 79 (1996) 1233.10.1111/j.1151-2916.1996.tb08578.x ↗
26. J. F. Mandell, D. H. Grande, T. H. Tsaing and F. J. McGarry, in “Composite Materials-Testing and Design,” STP-893, edited by J. M. Whitney (American Society for Testing and Materials, Philadelphia, PA, 1986) p. 87.
27. P. Bartos, J. Mater. Sci. 6 (1980) 3122.10.1007/BF00550385 ↗
28. R. J. Kerans, T. A. Parthasarathy, P. D. Jero, A. Chatterjee and N. J. Pagano, British Ceram.Trans. 92 (1993) 181.
29. M. N. Kallas, D. A. Koss, H. T. Hahn and J. R. Hellmann, J.Mater.Sci. 27 (1992) 3821.10.1007/BF00545464 ↗
30. D. B. Marshall, J.Am.Ceram.Soc. 67 (1984) C259.
31. M. D. Thouless and A. G. Evans, Acta Metall.Mater. 36 (1988) 517.10.1016/0001-6160(88)90083-1 ↗
32. A. G. Evans, Mat.Sci Eng. 71 (1985) 3.10.1016/0025-5416(85)90202-2 ↗
33. M. K. Brun and R. N. Singh, Adv.Ceram.Mater. 3 (1988) 506.10.1111/j.1551-2916.1988.tb00265.x ↗