Mechanical properties of polycrystalline silicon solar cell feed stock grown via fluidized bed reactors
Source abstract
Abstract
Polysilicon granular beads grown via a fluidized bed reactor, a feedstock for silicon solar cell production, were annealed, sectioned, and indented using a combination of nanoindentation and microhardness testing to determine the mechanical response of this commercially available raw material. The granular material, with macroscopic dimensions on the order of millimeters and an internal grain size on the order of 20 nm, has an indentation modulus of approximately 160 GPa, and a hardness prior to fracture of 9.6 GPa; these values are relatively insensitive to annealing at temperatures between 600 and 1100 °C. Indentation fracture testing suggests the toughness of this material is on the order of 0.6 MPa m1/2. The fracture sequence has been verified using acoustic emission testing during indentation. Annealing in air at 600 °C for 3 days increases the toughness by approximately 50% with little change in grain size. The as grown material contains solute hydrogen, identified by infrared spectroscopy, from the growth process; annealing in air tends to remove solute hydrogen from the material at temperatures above 1050 °C. The removal of solute hydrogen appears to cause slight increases in toughness, while grain growth at elevated annealing temperatures or the formation of hydrogen complexes in the silicon appears to decrease toughness. The results suggest thermal treatments of silicon grown with this method can moderately alter the friability of the final product.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Advanced Surface Polishing Techniques · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Caussat B, Hemati M, Couderc JP (1995) Chem Eng Sci 50:361510.1016/0009-2509(95)00172-2 ↗
2. Dahl MM, Bellou A, Bahr DF, Norton MG, Osborne EW (2009) J Cryst Growth 311:149610.1016/j.jcrysgro.2009.01.114 ↗
3. Ballarini R, Mullen RL, Yin Y, Kahn H, Stemmer S, Heuer AH (1997) J Mater Res 12:91510.1557/JMR.1997.0131 ↗
4. Cook RF (2006) J Mater Sci 41:841. doi: 10.1007/s10853-006-6567-y10.1007/s10853-006-6567-y ↗
5. Chiao YH, Clarke DR (1989) Acta Met 37:20310.1016/0001-6160(89)90279-4 ↗
6. John CFSt (1975) Philos Mag 32:119310.1080/14786437508228099 ↗
7. Brede M, Hansen P (1988) Acta Met 36:200310.1016/0001-6160(88)90302-1 ↗
8. Hirsch PB, Samuels J, Roberts SG (1989) Proc R Soc Lond A 421:2510.1098/rspa.1989.0002 ↗
9. Chen CP, Leipold MH (1980) Am Ceram Soc Bull 59:469
10. George A, Michot G (1993) Mater Sci Eng A 164:11810.1016/0921-5093(93)90649-Y ↗
11. Ericson F, Johansson S, Schweitz JA (1988) Mat Sci Eng A 105:13110.1016/0025-5416(88)90489-2 ↗
12. Ebrahimi F, Kalwani L (1999) Mat Sci Eng A 268:11610.1016/S0921-5093(99)00077-5 ↗
13. Fancher RW, Watkins CM, Norton MG, Bahr DF, Osborne EW (2001) J Mater Sci 36:5441. doi: 10.1023/A:101242552975310.1023/A:1012425529753 ↗
14. Brodie RC, Bahr DF (2003) Mat Sci Eng A 351:16610.1016/S0921-5093(02)00829-8 ↗
15. Sharpe WN, Yuan B, Edwards RL (1997) Mat Res Soc Symp Proc 505:5110.1557/PROC-505-51 ↗
16. Tsuchiya T, Sakata J, Taga Y (1997) Mat Res Soc Symp Proc 505:28510.1557/PROC-505-285 ↗
17. Kahn H, Tayebi N, Ballarini R, Mullen RL, Heuer AH (2000) Sens Actuators A 82:27410.1016/S0924-4247(99)00366-0 ↗
18. Oliver WC, Pharr GM (1992) J Mater Res 7:156410.1557/JMR.1992.1564 ↗
19. Morris DJ, Cook RF (2005) Int J Fract 136:23710.1007/s10704-005-6034-9 ↗
20. Morris DJ, Vodnick AM, Cook RF (2005) Int J Fract 136:26510.1007/s10704-005-6033-x ↗
21. Cook RF, Pharr GM (1990) J Am Ceram Soc 73:78710.1111/j.1151-2916.1990.tb05119.x ↗
22. von Keudell A, Abelson JR (1998) J Appl Phys 84:48910.1063/1.368082 ↗