XRD profile analysis characterization of ultrafine grained Al–Mg alloys
Source abstract
Abstract
The effect of impurities on the crystallite sizes and dislocation densities of ECAP-processed aluminum–magnesium alloys is studied by X-ray diffraction. It is shown that with increasing magnesium content the achievable reduction in crystallite size with ECAP eventually reaches a saturation state and a further reduction of the structural size seems unlikely. Simultaneously the dislocation density increases to a plateau level with increasing Mg content. In annealing experiments the microstructural stability of AlMg0.5 and the resulting changes are investigated by XRD profile analysis. It becomes evident that annealing leads to a moderate increase in crystallite size up to a temperature where accelerated crystallite growth begins. XRD results prior and after fatigue testing show an increase in crystallite size accompanied by a decrease in dislocation density.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Valiev RZ, Ishlamagaliev RK, Alexandrov IV (2000) Prog Mater Sci 45:103. doi:https://doi.org/10.1016/S0079-6425(99)00007-910.1016/S0079-6425(99)00007-9 ↗
2. Valiev RZ, Estrin Y, Horita Z, Langdon TG, Zehetbauer MJ, Zhu YT (2006) JOM 58(4):33. doi:https://doi.org/10.1007/s11837-006-0213-710.1007/s11837-006-0213-7 ↗
3. Xu C, Furukawa M, Horita Z, Langdon TG (2003) Adv Eng Mater 5(5):359. doi:https://doi.org/10.1002/adem.20031007510.1002/adem.200310075 ↗
4. Honeywell Electronic Materials, https://doi.org/www.honeywell.com
5. Ribárik G, Ungár T, Gubicza J (2001) J Appl Cryst 34:669. doi:https://doi.org/10.1107/S002188980101145110.1107/S0021889801011451 ↗
6. Ungár T, Gubicza J, Ribárik G, Borbély A (2001) J Appl Cryst 34:298–310. doi:https://doi.org/10.1107/S002188980100371510.1107/S0021889801003715 ↗
7. Wilkens M (1970) Phys Status Solidi (a) 2:359. doi:https://doi.org/10.1002/pssa.1970002022410.1002/pssa.19700020224 ↗
8. Langford JI, Louer D, Scardi P (2000) J Appl Cryst 33:964. doi:https://doi.org/10.1107/S002188980000460X10.1107/S002188980000460X ↗
9. Gubicza J, Ribárik G, Bakonyi I, Ungár T (2001) J Nanosci Nanotechnol 1(3):343. doi:https://doi.org/10.1166/jnn.2001.03910.1166/jnn.2001.039 ↗
10. Furukawa M, Iwahashi Y, Horita Z, Nemoto M, Langdon TG (1998) Mater Sci Eng A 257:328. doi:https://doi.org/10.1016/S0921-5093(98)00750-310.1016/S0921-5093(98)00750-3 ↗
11. Wilkens M, Eckert K (1964) Z Naturforschg 19a:45910.1515/zna-1964-0410 ↗
12. May J, Dinkel MK, Amberger D, Höppel HW, Göken M (2007) Metal Mater Trans A 38A:1941. doi:https://doi.org/10.1007/s11661-007-9110-010.1007/s11661-007-9110-0 ↗
13. May J, Höppel HW, Göken M (2004) Scr Mater 53:189. doi:https://doi.org/10.1016/j.scriptamat.2005.03.04310.1016/j.scriptamat.2005.03.043 ↗
14. Höppel HW, May J, Göken M (2008) In: 6th International Conference on Low Cycle Fatigue. DVM, Berlin; accepted for publication