Investigation of high-temperature plastic deformation using instrumented microindentation tests. Part II: The deformation of Al-based particulate reinforced composites at 473 K to 833 K
Source abstract
Abstract
Constant-load pyramidal indentation tests were performed from 473 K to 833 K on P/M fabricated 2024 aluminum reinforced with either SiO2, SiC, or Al2O3 particles to investigate the influence of particulate reinforcement on the high-temperature plastic deformation process during indentation. The composites all displayed larger apparent threshold stress σth than the previously reported unreinforced P/M 2024 aluminum alloy. SEM investigation of the indentations indicated that the indentation process is accompanied by considerable cracking and interfacial debonding of the reinforcing particles, the extent of which increases with increasing temperature. The magnitude of σth was largest for the Al2O3 reinforced composite and this is attributed to the load-transfer that occurs when the indenter contacts the reinforcing particles and the superior high-temperature interfacial strength of this composite. The apparent activation energy ΔG0 of the indentation strain rate increased from 0.25µb3 at 473 K to 0.60µb3 at 833 K. These values are within the expected range for weak particles and dislocation-dislocation interactions but are lower than the previously reported Δ0 of the unreinforced P/M 2024 alloy. We conclude that the low indentation strain rate of the particulate reinforced composites is the result of the load transfer due to the presence of the reinforcements and its affect on increasing the σth. The low values of ΔG0 are consistent with our observation that extensive particle cracking and interfacial debonding occur in the reinforced material during indentation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. M. FINOT, Y-L. SHEN, A. NEEDLEMAN and S. SURESH, Metall. Trans. A41 (1994) 885.
2. S. F. CORBIN and D. S. WILKINSON, Acta Metall. Mater. 42 (1994) 1311.10.1016/0956-7151(94)90147-3 ↗
3. T. CHRISTMAN, A. NEEDLEMAN and S. SURESH S, Acta Metall. Mater. 37 (1989) 3029.10.1016/0001-6160(89)90339-8 ↗
4. G. BAO, Acta Metall. Mater. 40 (1992) 2547.10.1016/0956-7151(92)90324-8 ↗
5. R. J. ARSENAULT, L. WANG and C. R. FENG, Acta Metall Mater. 39 (1991) 47.10.1016/0956-7151(91)90327-W ↗
6. P. M. SINGH and J. J. LEWANDOWSKI, Trans. 24A (1993) 2531.10.1007/BF02646532 ↗
7. W.-J. KIM and O. D. SHERBY, Acta Mater. 48 (2000) 1763.10.1016/S1359-6454(00)00006-9 ↗
8. W. J. KIM, J. H. YEON, D. H. SHIN and S. H. HONG, Mat. Sci. Eng. A269 (1999) 142.10.1016/S0921-5093(99)00157-4 ↗
9. W.-J. KIM, D.-W. KUM and H.-G. JEONG, J. Mater. Res. 16 (2001) 2429.10.1557/JMR.2001.0333 ↗
10. D. S. WILKINSON and E. ARTZ, Acta metall 34 (1986) 1893.10.1016/0001-6160(86)90247-6 ↗
11. R. S. W. SHEWFELT and L. M. BROWN, Phil. Mag. 35 (1977) 945.10.1080/14786437708232636 ↗
12. E. ARTZ, G. DEHM, P. GUMBSCH, O. KRAFT and D. WEISS, Prog. Mater. Sci. 46 (2001) 283.10.1016/S0079-6425(00)00015-3 ↗
13. K. T. CONLON and D. S. WILKINSON, Mat. Sci. Eng. A317 (2001) 108.10.1016/S0921-5093(01)01168-6 ↗
14. D. S. WILKINSON, W. POMPE and M. OESCHNER, Prog. Mater. Sci. 46 (2001) 379.10.1016/S0079-6425(00)00008-6 ↗
15. V. BHAKHRI and R. J. KLASSEN, submitted to J. Mat. Sci. (April 2005).
16. W. B. LI, J. L. HENSHALL, R. M. HOOPER and K. E. EASTERLING, Acta Metall. Mater. 39 (1991) 3099.10.1016/0956-7151(91)90043-Z ↗
17. S. SAIMOTO, B. J. DIAK and K. R. UPADHYAYA, Mater. Sci. Engng. A234 – A236 (1997) 1015.10.1016/S0921-5093(97)00317-1 ↗
18. B. J. DIAK and S. SAIMOTO Mater. Sci. Engng. A319 – A321 (2001) 909.10.1016/S0921-5093(01)01093-0 ↗
19. A. ELMUSTAFA and D. S. STONE, J. Mech. Phys. Solids 51 (2003) 357.10.1016/S0022-5096(02)00033-9 ↗
20. R. J. KLASSEN, B. J. DIAK and S. SAIMOTO, Mater. Sci. Engng. A387 – 389 (2004) 297.10.1016/j.msea.2004.02.079 ↗
21. H. J FROST and M. F. ASHBY, “Deformation-Mechanism Maps” (Pergamon Press, Oxford, 1982) p. 21.
22. R. N. SARAF, M.E.Sc “Creep Properties of SiO2 and NiAl Reinforced Composites” (Thesis University of Western Ontario, London Canada, 2003).
23. F. AZARMI, M.E.Sc “Creep Behaviour of Al-Based Composites Made By The P/M Technique” (Thesis University of Western Ontario, London Canada, 2002).
24. J. F. SMITH and S. ZHANG, Surf. Engng. 16 (2000) 143.10.1179/026708400101517044 ↗
25. B. D. BEAKE and J. F. SMITH, Philos. Mag. A8 (2002) 2179.10.1080/01418610208235727 ↗
26. B. D. BEAKE, S. R. GOODES and J. F. SMITH, Z. Metallkd. 7 (2003) 798.10.3139/146.030798 ↗