journal article·2007-06

Calorimetric studies of 8090 and 1441 Al–Li–Cu–Mg–Zr alloys of conventional and retrogressed and reaged tempers

K. S. Ghosh, K. Das, U. K. Chatterjee

Journal of Materials Science· Volume 42· Issue 12
Publisher page

Abstract

The differential scanning calorimetry (DSC) technique has been used to examine the solid state reactions of GPB zones formation, precipitation of δ′, T1, T2, S′, δ phases and their dissolution occurring in the 8090 and 1441 Al–Li–Cu–Mg–Zr alloys of the water-quenched (WQ), peak aged T8 and T6, over aged T7, retrogressed (R), retrogressed and reaged (RRA) T77 tempers. All the exothermic and endothermic peaks in the DSC thermograms have been identified and discussed. The noticeable differences observed in the thermograms of the 8090 and 1441 alloys have been explained and this is attributed to the variation in the concentrations of the solute elements Li, Cu and Mg in the alloys. The peak temperatures as well as the heat evolved and absorbed during the precipitation and dissolution reactions have been determined with the help of the built-in software of the simultaneous thermal analyzer (STA) used for DSC studies. X-ray diffractograms and a few TEM micrographs have been illustrated to correlate the reactions in these alloys. Further, all the thermograms of the WQ state of the 1441 alloy, taken at four different heating rates, have exhibited overlapping peaks of GPB zones formation and the δ′ phase precipitation. The overlapping peaks cause restrictions in determining the kinetic parameters of activation energy and growth parameter, but, interestingly, the thermograms of retrogressed tempers have showed separate peaks of GPB zones formation and δ′ phase precipitation which will easily enable to find out kinetic parameters, by varying heating rate method.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Davis JR (ed) (1998) ASM specialty handbook: aluminium lithium alloys. International Materials Information Society, Materials Park, OH, p 121
2. Harris SJ, Noble B, Dinsdale K (1983) In: Sanders TH Jr, Starke EA Jr (eds) Proceeding of the 2nd international conference on aluminium lithium alloys, Warrendale, PA, 1983. TMS and AIME, Warrendale, PA, p 219
3. Christodoulou L, Struble L, Pickens JR (1983) In: Sanders TH Jr, Starke EA Jr (eds) Proceeding of the 2nd international conference on aluminium lithium alloys, Warrendale, PA, 1983. TMS and AIME, Warrendale, PA, p 561
4. Holroyd NJH, Gray A, Scamans GM, Hermann R (1986) In: Baker C, Gregson PJ, Harris SJ, Peel CJ (eds) Proceeding of 3rd international conference on aluminium–lithium alloys, University of Oxford, July, 1985. The Institute of Metals, London, p 310
5. Binsfeld F, Habashi M, Galland J, Fidelle JP, Miannay D, Rofidal P (1987) In: Champier G, Dubost B, Miannay D, Sabetay L (eds) Proceeding of 4th international conference on aluminium lithium alloys, Paris, June, 1987 (Journal de Physique, Suppl. C3, 48), p C3:587
6. Miller WS, White J, Lloyd DJ (1987) In: Champier G, Dubost B, Miannay D, Sabetay L (eds) Proceeding of 4th international conference on aluminium lithium alloys, Paris, June, 1987 (Journal de Physique, Suppl. C3, 48), p C3:139
7. Gregson PJ, Flower HM, Tite CNJ, Mukhopadhyay AK (1986) Mat Sci Technol 2:34910.1179/mst.1986.2.4.349 ↗
8. Flower HM, Gregson PJ (1987) Mater Sci Technol 3:8110.1179/mst.1987.3.2.81 ↗
9. Kumar KS, Brown SA, Pickens JA (1996) Acta Mater 44:189910.1016/1359-6454(95)00319-3 ↗
10. Deiasi R, Adler PN (1977) Metall Trans A 8A:117
11. Adler RN, Deiasi R (1977) Metall Trans A 8A:118510.1007/BF02667404 ↗
12. Papazian JM (1981) Metall Trans A 12A:26910.1007/BF02655200 ↗
13. Papazian JM (1982) Metall Trans A 13A:76110.1007/BF02642389 ↗
14. Papazian JM, Deiasi RN, Adler PN (1980) Metall Trans A 11A:13510.1007/BF02700448 ↗
15. Abis S, Evangelista E, Mengucci P, Riontino G (1989) In: Sanders TH Jr, Starke EA Jr (eds) Proceeding of 5th international conference on aluminium lithium alloys, Williamsburg, Virginia, March, 1989. Materials and Component Engineering Publications, Birmingham, p 681
16. Cina B (1974) US Patent No. 3856584, December 24, 1974
17. Cina B, Ranish B (1974) Paper No. XXV, Aluminium Industrial Products. ASM, Pittsburg, PA, October 1974
18. Kanno M, Araki I, Cui Q (1994) Mater Sci Technol 10:59910.1179/mst.1994.10.7.599 ↗
19. Watkinson PC, Martin JW (1994) Mater Charact 33:1110.1016/1044-5803(94)90053-1 ↗
20. Komisarov V, Tlianker M, Cina B (1998) Mater Sci Eng A242:3910.1016/S0921-5093(97)00502-9 ↗
21. Ghosh KS, Das K, Chatterjee UK (2004) Mater Sci Technol 20:82510.1179/026708304225019650 ↗
22. Fox S, Flower HM, Mcdarmaid DC (1986) In: Baker C, Gregson PJ, Harris SJ, Peel CJ (eds) Aluminium lithium alloys III, Proceedings of the 3rd international conference on aluminium–lithium alloys, University of Oxford, July, 1985. The Institute of Metals, London, p 263
23. Mukhopadhyay AK, Tite CNJ, Flower HM, Gregson PJ, Sale F (1987) In: Champier G, Dubost B, Miannay D, Sabetay L (eds) Aluminium lithium alloys IV, Proceedings of the 4th international conference on aluminium lithium alloys, Paris, June, 1987 (Journal de Phyique, Suppl. 48), p C3:439
24. Luo A, Lloyd DJ, Gupta A, Youdelis WV (1993) Acta Metal Mater 41:76910.1016/0956-7151(93)90009-H ↗
25. Papazian JM (1986) Mater Sci Eng A 76:9710.1016/0025-5416(86)90391-5 ↗
26. Jena AK, Gupta AK, Chaturvedi MC (1989) Acta Metall 37:88510.1016/0001-6160(89)90015-1 ↗
27. De Macedo MC, Avillez RR, Solorzano IG (1994) Scripta Metal 31:170110.1016/0956-716X(94)90467-7 ↗
28. Starink MJ, Hobson AJ, Gregson PJ (1996) Scripta Metal 11:171110.1016/1359-6462(96)00036-X ↗
29. Starink MJ, Gregson PJ (1996) Mater Sci Forum 217–222:67310.4028/www.scientific.net/MSF.217-222.673 ↗
30. Harwood JJ (1956) In: Robertson WD (ed) Stress corrosion cracking and embrittlement. John Wiley & Sons
31. Jensrud O, Ryum N (1984) Mater Sci Eng 64:22910.1016/0025-5416(84)90106-X ↗
32. Nozato R, Nakai G (1977) Trans JIM 18:67910.2320/matertrans1960.18.679 ↗
33. Balmuth ES (1984) Scripta Metal 18:30110.1016/0036-9748(84)90440-X ↗
34. Gregson PJ, Flower HW (1984) J Mater Sci Lett 3:82910.1007/BF00727987 ↗
35. Radmilovic V, Thomas G, Shiflet GJ, Starke EA Jr (1989) Scripta Metal 23:114110.1016/0036-9748(89)90315-3 ↗
36. Singh V, Mukhopadhyay AK, Prasad KS (1997) Scripta Metal 37:151910.1016/S1359-6462(97)00295-9 ↗
37. Noble B, Trowsdale AJ (1995) Philos Mag 71:134510.1080/01418619508244378 ↗
38. Sato T, Tanaka N, Takahasi T (1988) Trans Japan Inst Metals 29:1710.2320/matertrans1960.29.17 ↗
39. Shaiu BJ, Li HT, Lee HY, Chen H (1990) Metall Trans A 21:113310.1007/BF02698244 ↗
40. Osamura K, Okuda H, Tanaka M, Nagao M (1992) In: Chen H, Vasudevan AK (eds) Kinetics of ordering transformation in metals. Warrendale, Pennsylvania, Metallurgical Society of AIME, p 291
41. Khachaturyan AG, Lindsey TF, Morris JW Jr (1988) Metall Trans A 19:24910.1007/BF02652533 ↗
42. Lendvai J, Wunderlich W, Gudladi HJ (1993) Philos Mag 67:9910.1080/01418619308207145 ↗
43. Del Rio J, Plazaola F, De Diego N (1994) Philos Mag A 69:59110.1080/01418619408242232 ↗
44. Starink MJ, Gregson PJ (1995) Scripta Metal 33:89310.1016/0956-716X(95)00317-O ↗
45. Peel CS, Evans B, Baker CA, Bennett DA, Gregson PJ, Flower HM (1983) In: Sanders TH Jr, Starke EA Jr (eds) Proceeding of the 2nd international conference on aluminium lithium alloys, Warrendale, PA, 1983. TMS and AIME, Warrendale, PA, p 363
46. Gregson PJ, Flower HW (1985) Acta Metall 33:52710.1016/0001-6160(85)90095-1 ↗
47. Ozbilen S, Flower HM (1989) In: Sanders TH Jr, Starke EA Jr (eds) Proceeding of 5th international conference on aluminium lithium alloys, Williamsburg, Virginia, March, 1989. Materials and Component Engineering Publications, Birmingham, p 651