journal article·2008-05

Thermal stability of CrNx nanometric coatings deposited on stainless steel

Carlo Paternoster, Alberto Fabrizi, Raimondo Cecchini, Mohamad El Mehtedi, Patrick Choquet

Journal of Materials Science· Volume 43· Issue 10
Publisher page

Abstract

Thin CrNx coatings are often used as protective coatings for steel. In these applications, coated parts might be subjected to high temperatures that can alter the coatings structural and mechanical properties. In this work, the properties of nanometric CrNx coatings deposited by reactive magnetron sputtering on AISI 304L stainless steel were studied by transmission electron microscopy, glazing incident X-ray diffraction, Atomic Force Microscopy, and nanoindentation. The effect of annealing, both in air and vacuum, on the coating crystal structure, surface morphology and hardness were also investigated. It was found that annealing in vacuum-induced phase transformation from CrN to Cr2N, while after annealing in air only Cr2O3 phase was present. Surface roughness did not increase for annealing in vacuum. CrNx coatings with higher Cr2N phase content showed lower roughness increase for annealing in air. Measured hardness was >10 GPa for as-deposited CrNx samples. An increase in hardness up to >20 GPa was found for vacuum-annealed samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Schramm BC, Scheerer H, Hoche H, Broszeit E, Abele E, Berger C (2004) Surf Coat Technol 188–189:62310.1016/j.surfcoat.2004.07.067 ↗
2. Polcar T, Parreira NMG, Novák R (2007) Surf Coat Technol 201:522810.1016/j.surfcoat.2006.07.121 ↗
3. Randhawa H (1988) Surf Coat Technol 36:82910.1016/0257-8972(88)90023-0 ↗
4. Pradhan SK, Nouveau C, Vasin A, Djouadi MA (2005) Surf Coat Technol 200:14110.1016/j.surfcoat.2005.02.038 ↗
5. ASM Specialty Handbook: Stainless Steels (1994) ASM International, Materials Park, OH, USA, pp 1–12
6. Feng HP, Hsu CH, Lu JK, Shy YH (2003) Mater Sci Eng A347:12310.1016/S0921-5093(02)00578-6 ↗
7. Aubert A, Gillet R, Gaucher A, Terrat JP (1983) Thin Solid Films 108:16510.1016/0040-6090(83)90501-1 ↗
8. Wei G, Rar A, Barnard JA (2001) Thin Solid Films 398–399:46010.1016/S0040-6090(01)01388-8 ↗
9. Barata A, Cunha L, Moura C (2001) Thin Solid Films 398–399:50110.1016/S0040-6090(01)01498-5 ↗
10. Lu FH, Chen HY, Hung CH (2003) J Vac Sci Technol A 21(3):67110.1116/1.1566784 ↗
11. Chang KL, Chung SC, Lai SH, Shih HC (2004) Appl Surf Sci 236:40610.1016/j.apsusc.2004.05.024 ↗
12. Gleiter H (2000) Acta Mater 48:110.1016/S1359-6454(99)00285-2 ↗
13. Komiya S, Ono S, Umezu N (1977) Thin Solid Films 45:47310.1016/0040-6090(77)90234-6 ↗
14. Oliver WC, Pharr GM (1992) J Mater Res 7:156410.1557/JMR.1992.1564 ↗
15. ASM handbook: metallography and microstructure (2004) ASM International, Materials Park, OH, USA, pp 684–691
16. Zhao ZB, Rek ZU, Yalisove SM, Bilello JC (2005) Thin Solid Films 472:9610.1016/j.tsf.2004.06.116 ↗
17. Mayrhofer PH, Tischler G, Mitterer C (2001) Surf Coat Technol 142–144:7810.1016/S0257-8972(01)01090-8 ↗
18. Chen HY, Lu FH (2003) J Mater Sci Lett 22:81710.1023/A:1023912225718 ↗
19. Herr W, Broszeit E (1997) Surf Coat Technol 97:33510.1016/S0257-8972(97)00196-5 ↗
20. Lu FH, Chen HY (2001) Thin Solid Films 398–399:36810.1016/S0040-6090(01)01346-3 ↗
21. Héau C, Fillit RY, Vaux F, Pascaretti F (1999) Surf Coat Technol 120–121:20010.1016/S0257-8972(99)00456-9 ↗
22. Odén M, Almer J, Håkansson G, Olsson M (2000) Thin Solid Films 377–378:40710.1016/S0040-6090(00)01307-9 ↗
23. Castaldi L, Kurapov D, Reiter A, Shklover V, Schwaller P, Patscheider J (2007) Surf Coat Technol. doi:https://doi.org/10.1016/j.surfcoat.2007.05.07010.1016/j.surfcoat.2007.05.070 ↗
24. Mayrhofer PH, Willmann H, Mitterer C (2001) Surf Coat Technol 146:22210.1016/S0257-8972(01)01471-2 ↗
25. Wang DY, Lin JH, Ho WY (1998) Thin Solid Films 332:29510.1016/S0040-6090(98)01266-8 ↗
26. Barshilia BHC, Jain A, Rajam KS (2004) Vacuum 72:24110.1016/j.vacuum.2003.08.003 ↗
27. Chen HY, Lu FH (2006) Thin Solid Films 515:217910.1016/j.tsf.2006.06.039 ↗
28. Tuck JR, Korsunsky AM, Bull SJ, Davidson RI (2001) Surf Coat Technol 137:21710.1016/S0257-8972(00)01063-X ↗
29. Puchi-Cabrera ES (2002) Surf Coat Technol 160:17710.1016/S0257-8972(02)00394-8 ↗
30. Korsunsky AM, McGurk MR, Bull SJ, Page TF (1998) Surf Coat Technol 99:17110.1016/S0257-8972(97)00522-7 ↗
31. Ichimura H, Ando I (2001) Surf Coat Technol 145:8810.1016/S0257-8972(01)01290-7 ↗
32. Tu JN, Duh JG, Tsai SY (2000) Surf Coat Technol 133–134:18110.1016/S0257-8972(00)00961-0 ↗
33. Kostov KG, Ueda M, Lepiensky M, Soares PC Jr, Gomes GF, Silva MM, Reuther H (2004) Surf Coat Technol 186:20410.1016/j.surfcoat.2004.04.027 ↗
34. Herr W, Broszeit E (1997) Surf Coat Techn 97:66910.1016/S0257-8972(97)00323-X ↗
35. Cunha L, Andritschky M, Pischow K, Wang Z (1999) Thin Solid Films 355–356:46510.1016/S0040-6090(99)00552-0 ↗
36. Lee JW, Tien SK, Kuo YC, Chen CM (2006) Surf Coat Technol 200:333010.1016/j.surfcoat.2005.07.047 ↗