journal article·2001-02

Corrosion of TP347H FG stainless steel in a biomass fired PF utility boiler

C. Liu, J. A. Little, P. J. Henderson, Per Ljung

Journal of Materials Science· Volume 36· Issue 4
Publisher page

Abstract

Detailed microscopic examinations have been conducted on two, temperature-regulated probes which had been exposed to biomass flue gas inside a PF boiler for 3770 h at 600° and 650°C respectively. The two probes were made from commercial grade heat exchanger alloy (TP 347H FG). A significant buildup of potassium chloride and sulphate was found on both probes within the deposits that sinter more strongly on the 650°C probe. Both probes suffer extensive intergranular corrosion as well as general corrosion. The higher temperature enhances scale formation which may provide a beneficial effect with respect to hot corrosion resistance. The intergranular corrosion is linked to the presence of sulphur. The overall material wastage is almost the same for both probes and for different locations covered by deposit.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermochemical Biomass Conversion Processes · Coal Combustion and Slurry Processing · Heat transfer and supercritical fluids

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. B. M. Jenkins, L. L. Baxter, T. R. Miles and T. R. (Jr.) Miles, Fuel Processing Technology 54 (1998) 17.10.1016/S0378-3820(97)00059-3 ↗
2. L. L. Baxter, Biomass and Bioenergy 4 (1993) 85.10.1016/0961-9534(93)90031-X ↗
3. D. C. Dayton, R. J. French and T. A. Milne, Engery and Fuels 9 (1995) 855.10.1021/ef00053a018 ↗
4. T. R. Miles, T. R. (Jr.) Miles, L. L. Baxter, R. W. Bryers, B. M. Jenkins and L. L. Oden, Biomass and Bioenergy 10 (1996) 125.10.1016/0961-9534(95)00067-4 ↗
5. F. S. Pettit and C. S. Giggins, in “Superalloys II,” edited by C. T. Sims, N. S. Stoloff and W. C. Hagel (John Wiley & Sons Inc., USA, 1987) p. 327.
6. Y. Kawahara, Materials at High Temperatures 14 (1996) 261.10.1080/09603409.1997.11689552 ↗
7. J. Stringer and I. W. Wright, Oxidation of Metals 44 (1995) 265.10.1007/BF01046730 ↗
8. K. Natesan, JOM 43 (1991) 61.10.1007/BF03222723 ↗
9. R. A. Rapp and Y. S. Zhang, Molten Salt Forum 5/6 (1998) 25.
10. S. C. Srivastava, K. M. Godiwalla and M. K. Banerjee, J. Mater. Sci. 32 (1997) 835.10.1023/A:1018585129341 ↗
11. K. L. Luthra and D. A. Shores, J. Electrochem. Soc. 127 (1980) 2202.10.1149/1.2129375 ↗
12. K. L. Luthra, ibid. 132 (1985) 1293.10.1149/1.2114105 ↗
13. W. T. Reid, in “External Corrosion and Deposits: Boilers and Gas Turbines” (Elservier, New York, 1971).
14. G. Y. Lai, in “High-Temperature Corrosion of Enginnering Alloys” (ASM International, Materials Park, OH 44073, USA, 1990).
15. H. J. Grabke, E. Reese and M. Spiegel, Molten Salt Forum 5/6 (1998) 405.
16. A. J. B. Cutler, Materials Science & Technology 3 (1987) 512.10.1080/02670836.1987.11782262 ↗
17. H. Asteman, J.-E. Svensson, L.-G. Johansson and M. Norell, Oxidation of Metals 52 (1999) 95.10.1023/A:1018875024306 ↗