journal article·2002-03

Mechanical and electrical properties of heavily drawn Cu-Nb microcomposites with various Nb contents

S. I. Hong, M. A. Hill

Journal of Materials Science· Volume 37· Issue 6
Publisher page

Abstract

The mechanical and electrical properties of Cu-Nb filamentary microcomposite fabricated by the bundling and drawing process were examined. The strength increased gradually with increasing Nb content while the ductility was insensitive to Nb content. The ratios of yield stresses are found to be close to that of Young's moduli in various Cu-Nb microcomposites, suggesting that athermal obstacles primarily control the strength. The fracture morphologies show ductile fractures irrespective of Nb contents. Secondary cracking along the interfaces between subelemental wires was occasionally observed and the frequency of secondary cracking increased with increasing Nb content. The conductivity and the resistivity ratio (ρ295 K/ρ75 K) decreased with increasing Nb content. The decrease of the conductivity and the resistivity ratio can be explained by the increasing contribution of interface scattering.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. J. D. VERHOEVEN, L. S. CHUMBLEY, F. C. LAABS and W. A. SPITZIG, Acta Metall. Mater.39 (1991) 2825.10.1016/0956-7151(91)90100-F ↗
2. P. D. FUNKENBUSCH and T. H. COURTNEY, Scripta Metall. 23 (1989) 1719.10.1016/0036-9748(89)90349-9 ↗
3. T. H. COURTNEY, in “Metal Matrix Composites: Processing and Interfaces,” edited by R. K. Everett and R. J. Arsenault (Academic Press, San Diego, USA, 1991) p. 101.
4. C. L. TRYBUS and W. A. SPITZIG, Acta Metall. 37 (1989) 1971.10.1016/0001-6160(89)90081-3 ↗
5. W. A. SPITZIG, C. L. TRYBUS and J. D. VERHOEVEN, in “Metal Matrix Composites: Mechanisms and Properties,” edited by R. K. Everett and R. J. Arsenault (Academic Press, San Diego, USA, 1991) p. 151.
6. P. D. FUNKENBUSCH and T. H. COURTNEY, Scripta Metall. Mater. 24 (1990) 1175.10.1016/0956-716X(90)90322-8 ↗
7. C. BISELLI and D. G. MORRIS, Acta Metall. Mater. 42 (1994) 163.10.1016/0956-7151(94)90059-0 ↗
8. Idem., ibid.44 (1996) 493.10.1016/1359-6454(95)00212-X ↗
9. U. HANGEN and D. RAABE, ibid. 43 (1995) 4075.10.1016/0956-7151(95)00079-B ↗
10. S. I. HONG and M. A. HILL,ibid. 46 (1998) 4111.10.1016/S1359-6454(98)00106-2 ↗
11. Idem., Mater. Sci. Eng. A 281 (2000) 189.10.1016/S0921-5093(99)00728-5 ↗
12. S. I. HONG, Scripta Mater. 39 (1998) 1685.10.1016/S1359-6462(98)00383-2 ↗
13. W. A. SPITZIG, F. C. LAABS, H. L. DOWNING and C. V. RENAUD, Materials and Manufacturing Processes 7 (1992) 1.10.1080/10426919208947395 ↗
14. J. BEVK, J. P. HARBISON and J. L. BELL, J. Appl. Phys. 49 (1978) 6031.10.1063/1.324573 ↗
15. W. A. SPITZIG, H. L. DOWNING, F. C. LAABS, E. D. GIBSON and J. D. VERHOEVEN, Metall. Trans. 24A (1993) 7.10.1007/BF02669596 ↗
16. W. A. SPITZIG, A. R. PELTON and F. C. LAABS, Acta Metall. 35 (1987) 2427.10.1016/0001-6160(87)90140-4 ↗
17. S. I. HONG and M. A. HILL, Scripta Mater. 42 (2000) 737.10.1016/S1359-6462(99)00423-6 ↗
18. J. D. VERHOEVEN, H. L. DOWING, L. S. CHUMBLEY and E. D. GIBSON, J. Appl. Phys. 65 (1989) 1293.10.1063/1.343024 ↗
19. S. I. HONG and M. A. HILL, Mater. Sci. Eng. A 264 (1999) 151.10.1016/S0921-5093(98)01097-1 ↗
20. K. R. KARASEK and J. BEVKM, J. Appl. Phys. 52 (1981) 1370.10.1063/1.329767 ↗
21. C. L. TRYBUS, L. S. CHUMBLY, W. A. SPITZIG and J. D. VERHOEVEN, Ultramicroscopy 22 (1989) 315.10.1016/0304-3991(89)90060-0 ↗
22. G. FROMMEYER and G. WASSERMANN, Phys. Stat. Sol. A 27 (1975) 99.10.1002/pssa.2210270112 ↗
23. S. I. HONG, J. Mater. Res. 15 (2000) 1889.10.1557/JMR.2000.0274 ↗