journal article·2000-09

High-temperature oxidation of Fe3Al containing yttrium

Insoo Kim, W. D. Cho, H. J. Kim

Journal of Materials Science· Volume 35· Issue 18
Publisher page

Abstract

The effect of yttrium addition on the oxidation behavior of Fe3Al alloys was investigated in terms of oxidation rate and oxide adhesion in the temperature range of 800 to 1100 °C. The oxidation rate of the alloys, Fe-14.3 wt% Al and Fe-14.1 wt% Al-0.3 wt% Y, was nearly identical, and the parabolic rate constant as a function of temperature is found to be Kp = 5128 exp[−39506 (cal/mol)/RT] mg2/cm4 hr. While the alumina scale formed on the Y-free Fe3Al alloy was observed to be fragile and spalled easily, the oxide layer formed on the Fe3Al-Y was protective, dense, and adhesive. Based on the microstructural, morphological, and compositional studies, the adhesion improvement due to the yttrium addition was discussed in terms of growth stress, the formation of pegs and scale growth mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Engineering Applied Research · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. G. Wallwork and A. Hed, Oxid. Met. 3 (1971) 171.10.1007/BF00603485 ↗
2. G. Sauthoff, “Intermetallics” (Weinheim, New York, 1995) p. 13.10.1002/9783527615414 ↗
3. C. S. Tedmon, J. Electrochem. Soc. 113 (1966) 766.10.1149/1.2424115 ↗
4. T. A. Ramanarayanan, M. Raghavan and R. Petkovic-luton, ibid. 131 (1984) 923.10.1149/1.2115728 ↗
5. M. Raghavan and R. Petkovic-luton Idem., Oxid. Met. 22 (1984) 83.10.1007/BF00656898 ↗
6. T. A. Ramanarayanan, R. Ayer, R. Petkovicluton and D. P. Leta, ibid. 29 (1988) 445.10.1007/BF00666845 ↗
7. P. Fox and G. J. Tatlock, Mater. Sci. Technol. 4 (1988) 439.10.1179/mst.1988.4.5.439 ↗
8. F. A. Golightly, F. H. Stott and G. C. Wood, Oxid. Met. 10 (1976) 163.10.1007/BF00612158 ↗
9. K. L. Luthra and C. L. Briant, ibid. 26 (1986) 397.10.1007/BF00659344 ↗
10. J. Nowok, ibid. 18 (1982) 1.10.1007/BF00656091 ↗
11. Y. Saito and T. Maruyma, Mat. Sci. Eng. 87 (1987) 275.10.1016/0025-5416(87)90389-2 ↗
12. M. W. Brumm and H. J. Grabke, Corros. Sci. 34 (1993) 547.10.1016/0010-938X(93)90271-H ↗
13. S. C. Choi, H. J. Cho and D. B. Lee, Oxid. Met. 46 (1996) 109.10.1007/BF01046886 ↗
14. C. S. Giggins and F. S. Pettit, Metall. Trans. 2 (1971) 1071.10.1007/BF02664238 ↗
15. J. Peters and H. J. Grabke, Werkst. Korros. 35 (1984) 385.10.1002/maco.19840350902 ↗
16. A. B. Anderson and S. P. Mehandru, J. Electrochem. Soc. 132 (1985) 1695.10.1149/1.2114193 ↗
17. L. L. Krishan and Clyde L. Briant, Oxid. Met. 26 (1986) 397.10.1007/BF00659344 ↗
18. J. E. Mcdonald and J. G. Eberhart, Trans. AIME 233 (1965) 512.
19. G. B. Abderrazik, G. Moulin and A. M. Huntz, Solid State Ionics 22 (1987) 285.10.1016/0167-2738(87)90146-9 ↗
20. G. Moulin and A. M. Huntz Idem., Oxid. Met. 33 (1990) 237.10.1007/BF00667416 ↗
21. J. H. Devan, in “Oxidation of High-Temperature Intermetallics,” edited by T. Grobstein and J. Doychak (TMS, Warrendale, PA, 1989) p. 107.
22. B. A. Pint, J. R. Martin and L. W. Hobbs, Oxid. Met. 39 (1993) 167.10.1007/BF00665610 ↗
23. E. Schumann, J. C. Yang, M. Ruhle and M. J. Graham, ibid. 46 (1996) 37.10.1007/BF01046883 ↗
24. R. Prescott, D. F. Mitchell, G. I. Sproule, R. J. Hussey and M. J. Graham, in “High Temp. Corros. Adv. Mater. Prot. Coat.,” edited by S. Yasutoshi (North-Holland, Amsterdam, Neth.,1992) p. 83.